Labshake search
Citations for Beckman :
801 - 850 of 1323 citations for 6 Bromo 4 trifluoromethyl benzo d thiazole 2 thiol since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2021Quote: ... The samples were centrifuged at 4°C for 3 h at 100,000 g by using Avanti J-30XP (Beckman, USA), and the fractions were collected using a Brandel Fractionation System (USA ...
-
bioRxiv - Microbiology 2021Quote: ... The treated cells were pelleted by centrifugation at 12,000×g at 4 °C for 20 min (Beckman Allegra X-15R) and the supernatant was discarded ...
-
bioRxiv - Plant Biology 2020Quote: ... The insoluble cell debris was removed via centrifugation for 30 min at 4°C and 20,000 rpm (JA-25.50, Beckman Coulter®). The supernatant was incubated for 1 h with low agitation and with 1.2 ml Glutathione-sepharose (GE-Healthcare ...
-
bioRxiv - Plant Biology 2020Quote: ... the cells were harvested by centrifuging for 30 min at 4°C and 6,000 rpm (JA-10, Beckman Coulter®). The cells were resuspended in 1x PBS (pH 7.3 ...
-
bioRxiv - Immunology 2020Quote: ... Then the concentrated supernatant was ultracentrifuged at 110,000 g for 1 hour at 4°C (Beckman Coulter L100k, company name) to sediment the vesicular fraction into a pellet ...
-
bioRxiv - Genomics 2021Quote: ... The tubes were then balanced and centrifuged in a Beckman Coulter L7-65 Ultracentrifuge at 25,000rpm at 4°C for 2hr using a Beckman Coulter SW28 swing bucket rotor (Beckman Coulter). The supernatant was carefully removed via aspiration ...
-
bioRxiv - Genomics 2019Quote: ... 37°C for 30 min then cooled to 4°C before proceeding to a 2.2x Agencourt RNAClean XP cleanup (Beckman Coulter). The RNA was eluted in 11.5 μL nuclease-free water ...
-
bioRxiv - Biochemistry 2019Quote: ... Ribosomes were pelleted via centrifugation at 63,000 x g for 16-18 hours at 4°C using a Type 80 Ti rotor (Beckman Coulter). Ribosome pellets were dissolved in resuspension buffer (20 mM Tris-HCl pH 7.5 ...
-
bioRxiv - Biochemistry 2019Quote: ... Fractions containing 40S and 60S ribosomal subunits as identified via absorption at 254 nM were pelleted via centrifugation at 63,000 x g for 20 hours at 4°C using a Type 80 Ti rotor (Beckman Coulter). Ribosomal subunits were resuspended in storage buffer (30 mM HEPES-KOH pH 7.4 ...
-
bioRxiv - Biochemistry 2019Quote: ... The homogenate was centrifuged for 10 min at 10,000×g at 4°C in a Ti-70 rotor and Optima XPN-90 ultracentrifuge (Beckman Coulter) and the supernatant was removed ...
-
bioRxiv - Molecular Biology 2020Quote: ... by centrifuging at 63,000 x g for 18 hrs at 4°C using a Type 80 Ti rotor (Beckman Coulter). Pellets were resuspended and these samples were analysed by mass spectrometry.
-
bioRxiv - Immunology 2021Quote: ... Ultracentrifugation in a Beckman L7-65 ultracentrifuge at 25,000 rpm for two hours at 4°C using a Beckman SW28 rotor (Beckman Coulter) was performed to pellet the viruses through the sucrose cushion while soluble egg proteins were removed ...
-
bioRxiv - Cell Biology 2020Quote: ... The ultracentrifugation (UC) steps were performed in refrigerated conditions (4°C) with rotors 50.4Ti or 70Ti (Beckman-Coulter, California, US).
-
bioRxiv - Physiology 2021Quote: ... the supernatant was ultracentrifuged at 100,000 g for 70 min at 4°C using an MLA-55 rotor (Beckman Coulter) and an Optima MAX-TL Ultracentrifuge (Beckman Coulter) ...
-
bioRxiv - Biochemistry 2021Quote: ... Samples were ultracentrifuged at 120,000 × g for 90 minutes at 4 °C in an Optima XPN-80 ultracentrifuge (Beckman Coulter) using a SW55 Ti swinging-bucket rotor (Beckman Coulter) ...
-
bioRxiv - Biochemistry 2021Quote: ... and cellular debris was removed by centrifugation at 90 000 x g for 20 min at 4°C (45 Ti rotor, Beckman). Membranes were collected by ultracentrifugation at 220 000 x g for 90 min at 4°C (45Ti rotor ...
-
bioRxiv - Cell Biology 2020Quote: ... This crude mitochondrial pellet was further purified on a discontinuous percoll gradient (buffer composition 15/23/40% sucrose) by centrifugation (40,000 x g, 1hr, 4°C) in an SW41 rotor (Beckman Coulter) and enriched mitochondria were collected from the 23-40% interface (adapted from [76]) ...
-
bioRxiv - Cell Biology 2020Quote: ... Tubes were centrifuged twice at 100,000 x g for 70 min at 4°C with a Beckman ultracentrifuge (32Ti rotor from Beckman Coulter). Supernatants were removed and the pellets resuspended in phosphate-buffered saline (PBS ...
-
bioRxiv - Microbiology 2020Quote: ... Microbial cells were collected from to 2-3 L of water samples by centrifugation at 12,000 × g and 4°C for 20 min in a high-speed centrifuge (Beckman, USA). Total genomic DNA was extracted using AxyPrep™ Genomic DNA Miniprep Kit (Axygen ...
-
bioRxiv - Microbiology 2020Quote: ... Two distinct fractions were collected from the first CsCl density gradient centrifugation (17,000 × g, 60 min, 4°C in a fixed angle MLA-55 rotor, Beckman Coulter), each were sedimented (4000 × g ...
-
bioRxiv - Molecular Biology 2021Quote: ... lysates were spun for 24 h at 4°C at 50000 rpm in a Type 70 Ti rotor (Beckman Coulter) through a 40 % (w/v ...
-
bioRxiv - Microbiology 2021Quote: ... purified by ultracentrifugation through a sucrose cushion (25% weight/volume in Tris-NaCl-EDTA buffer) for 75 min at 4°C and 28,000 rpm using a SW 32 TI rotor (Beckman Coulter), resuspended in serum-free RPMI 1640 or DMEM medium and stored in small aliquots at −80°C ...
-
bioRxiv - Immunology 2020Quote: ... previously coated over-night at 4 °C with 1.5 μg per well of anti-Igκ or anti-IgM (Beckman Coulter) in PBS and saturated with culture medium ...
-
bioRxiv - Microbiology 2021Quote: ... The resting supernatants were filtered through 0.45µm syringe filters and ultracentrifuged at 100,000 x g for 1h at 4°C (SW41 Ti swinging-bucket rotor, Beckman Coulter). The supernatant was discarded and the pellet suspended in 0.22 µm-pore filtered or 0.02 µm-pore filtered (for Flow Cytometry analysis ...
-
bioRxiv - Immunology 2021Quote: ... 1×106 thawed PBMCs were centrifuged (750×g for 5 minutes at 4°C) using a swinging bucket rotor (Beckman Coulter Avanti J-15RIVD with JS4.750 swinging bucket ...
-
bioRxiv - Biochemistry 2022Quote: ... A soluble fraction was obtained after centrifugation of the lysate at 19,000 rpm for 40 min at 4 °C performed using Avanti J-E with a rotor JA-20 (BECKMAN COULTER) to remove insoluble debris.
-
Dynamic states of eIF6 and SDS variants modulate interactions with uL14 of the 60S ribosomal subunitbioRxiv - Biochemistry 2022Quote: ... Ribosomes were pelleted by centrifugation at 63,000g for 16–19 hrs at 4°C using a Type 80 Ti rotor (Beckman Coulter). For all ultracentrifugation steps indicated here ...
-
Dynamic states of eIF6 and SDS variants modulate interactions with uL14 of the 60S ribosomal subunitbioRxiv - Biochemistry 2022Quote: ... were pelleted by centrifugation at 63,000g for 20 hrs at 4°C in a Type 80 Ti rotor (Beckman Coulter) as described above ...
-
bioRxiv - Cell Biology 2022Quote: ... OptiPrep step-gradient and centrifuged for 60 min at 19,210 × g at 4 °C in a TLS-55 rotor (Beckman Coulter). The ROS band was collected with a 18G needle ...
-
bioRxiv - Cell Biology 2022Quote: ... The lysate was dounced for 10 strokes on ice and cleared via centrifugation at 80K rpm for 10 minutes at 4°C using a TLA 110 rotor (Beckman) in a tabletop Beckm an ultracentrifuge ...
-
bioRxiv - Plant Biology 2022Quote: ... in a 12.5 mL ultracentrifuge tube and centrifuged for 1 h at 4°C at 200,000 × g in a swinging bucket rotor (Sorval SW-41 Ti; Beckman Coulter), with moderate acceleration and deceleration ...
-
bioRxiv - Microbiology 2022Quote: ... purified by ultracentrifugation through a sucrose cushion (25% weight/volume in Tris-NaCl-EDTA buffer) for 75 min at 4°C and 28,000 rpm using a SW 32 TI rotor (Beckman Coulter), resuspended in serum-free DMEM medium and stored in small aliquots at −80°C ...
-
bioRxiv - Microbiology 2022Quote: ... Pseudotypes and VLPs were then concentrated by ultracentrifugation (20,000 RPM, 4 ºC, 1.5h, Beckman Coulter Optima XPN-100, SW32Ti rotor) through a 20% (w/v ...
-
bioRxiv - Microbiology 2022Quote: ... 20 mL of the filtrate was then ultracentrifuged at 150,000 × g at 4°C for 3 h (Beckman Coulter, USA) through a 20% (w/v ...
-
bioRxiv - Microbiology 2022Quote: ... at 20 KPSI at 4°C and then centrifuged at 19 000 RPM in a JA-25.50 rotor (Beckman Coulter) for 30 minutes at 4°C ...
-
bioRxiv - Molecular Biology 2023Quote: ... using 10-40 % sucrose gradients in buffer A after 3 hours of centrifugation at 35,000 rpm and 4 °C in SW41 rotor (Beckman Coulter). To isolate ribosomes for structural analysis ...
-
bioRxiv - Neuroscience 2023Quote: ... followed by ultracentrifugation at 100,000 x g for 60 minutes at 4°C (SW 41 Ti Rotor, Beckman Coulter Inc). For size-exclusion chromatography (SEC ...
-
bioRxiv - Neuroscience 2022Quote: ... trypsin-dissociated cells on 96-well plates were centrifuged at 1,000g for 5 min at 4°C using a swinging-bucket rotor for microplates (Beckman S6096) in an Allegra X-30R centrifuge (Beckman) ...
-
SARS-CoV2 associated secretion of nanoLuciferase reports on virus and Virus-Like Particle productionbioRxiv - Molecular Biology 2022Quote: ... the samples were pelleted through a 20% sucrose in 120 mM HEPES cushion at 100,000xg for 2hrs at 4 °C with 45 Ti or 70 Ti fixed-angle rotor (Beckman-Coulter) depending on the volume of the sample ...
-
bioRxiv - Molecular Biology 2022Quote: ... The gradients were ultra-centrifuged for 3 h at 175,000g at 4°C in a SW41Ti rotor (Beckman-Coulter, USA) and analyzed by measuring the absorbance continuously at 260 nm using a piston gradient fractionator (Biocomp Instruments) ...
-
bioRxiv - Molecular Biology 2022Quote: ... and spun at 40,000 rpm for 3 hours at 4°C using a SW 41 Ti Swinging-Bucket Rotor (Beckman Coulter). Sucrose gradient fractionation was performed by using a Brandel Density Gradient Fractionation System ...
-
bioRxiv - Molecular Biology 2022Quote: ... and the sucrose cushion was ultra-centrifuged for 1.5 hours at 80000 rpm and 4°C in TLA-100 rotor (Beckman Coulter). The pellet was resuspended in 100 µL of buffer F (50 mM HEPES-KOH pH 7.4 ...
-
bioRxiv - Cell Biology 2023Quote: ... Lysates were cleared by centrifugation at 25 000 rpm for 45 min at 4°C in a Ti45 rotor (Beckman). Supernatant was incubated with 5 ml of Glutathione Sepharose 4B beads slurry (Cytiva ...
-
bioRxiv - Neuroscience 2022Quote: ... The homogenised mixture then underwent ultracentrifugation at 200,000 g for 110 min at 4°C with a SW-41 Ti rotor (Beckman Coulter) and transferred the supernatant into a Slide-A-Lyzer™ G2 Dialysis Cassettes 2K MWCO (Thermo ...
-
bioRxiv - Cancer Biology 2022Quote: ... Fractions 2–9 were diluted 1:10 in PBS and centrifuged at 20,000 ×g (bEVs) or 100,000 ×g (sEVs) at 4°C for 1 h with an MLS-55 rotor (Beckman Coulter). The bEV and sEV pellets were suspended in double 0.22-µm-filtered PBS and were either used directly for experiments or stored in aliquots at −80°C until subsequent BLI ...
-
bioRxiv - Molecular Biology 2023Quote: 8 mL of viral supernatant on a 3 mL of 20% sucrose cushion were ultracentrifugated for 3 h at 100,000 x g at 4°C using an Optima L80-XP instrument (Beckman Coulter). After ultracentrifugation ...
-
bioRxiv - Systems Biology 2023Quote: ... Gradients were centrifuged at 4°C for 17 h at 100,000 g using an L7 ultracentrifuge with an SW28 swing out rotor (Beckman Coulter). Fractions (F ...
-
bioRxiv - Synthetic Biology 2023Quote: ... The gradients were ultra-centrifuged at 41,000 rpm for 3 hours at 4°C (Optima L-80 XP ultracentrifuge (Beckman-Coulter)) ...
-
bioRxiv - Microbiology 2022Quote: ... The eluted sample was collected by centrifugation at 2000 rpm for 1 minute 4 °C in a F241.5P rotor using a 149 Microfuge 22R centrifuge (Beckman Coulter). For SDS-PAGE analyses ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 300,000×g at 4°C for 3 h in a TLA-110 fixed angle rotor (k-factor 13) (Beckman Coulter). The pellet was resuspended in 10 µL PBS of which 3 µL was adsorbed onto glow-discharged 2 nm carbon layer coated Quantifoil R1.2/1.3 400 mesh gold grids ...