Labshake search
Citations for Beckman :
751 - 800 of 1540 citations for 5 Pyrimidinecarbonitrile 4 6 diamino 2 methoxy 9CI since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2024Quote: ... by centrifugation at 5,000 x g at 4°C for 30 minutes in a fixed angle rotor (Beckman Coulter). The qEV column washed with 1x PBS was then loaded with 500 µL of concentrated supernatant followed by 2.5 mL PBS to collect 3 mL void volume ...
-
bioRxiv - Molecular Biology 2024Quote: ... for ultracentrifugation at 100,000 × g for 1 hour at 4°C (JXN-30 centrifuge, JA-30.50 Ti Rotor, Beckman Coulter). The pellet was washed with PBS and centrifuged again at 100,000 × g for 1 hour at 4°C to remove soluble contaminant ...
-
bioRxiv - Neuroscience 2024Quote: ... and PBS was added to reach a 4.5 mL tube filling and centrifuged at 120,000xg for 100 min at 4°C in the L-60 Optima Ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Molecular Biology 2024Quote: ... and 1 M sucrose) at 100,000 rpm (543,000 × g) and 4°C for 1 h with a TLA110 rotor (Beckman Coulter) and an Optima MAX-TL Ultracentrifuge (Beckman Coulter) ...
-
bioRxiv - Biochemistry 2023Quote: ... lysates were centrifuged at 60,000 x g (4 °C) for 45 min (Beckman Avanti JXN-26 (rotor: JA 25.5)) and immediately supplemented with 10 mL pre-washed Ni2+-NTA agarose (QIAGEN ...
-
bioRxiv - Neuroscience 2023Quote: ... DTT-treated EVs were pelleted at 100,000 x g for 70 min at 4°C in a TLA100 rotor (Beckman). The supernatant ...
-
bioRxiv - Neuroscience 2023Quote: ... The prepared gradients were centrifuged at 200,000 x g for 16 h at 4°C in an SW41Ti rotor (Beckman), with no braking during deceleration ...
-
bioRxiv - Neuroscience 2023Quote: ... The pellet was resuspended in 4.5 volumes of ice-cold extraction buffer and re- centrifuged at 11,300 RPM for 10 min at 4°C using a Ti45 rotor (Beckman). The supernatant was filtered through a 70 μm pore size cell-strainer and combined with the first supernatant ...
-
bioRxiv - Neuroscience 2023Quote: ... The tube was topped up to 23 mL with PBS and centrifuged at 59,300 RPM for 30 min at 4°C using a Ti70 rotor (Beckman). The floating lipid layer and supernatant were discarded and the pellet was transferred to a 2 mL tube in 50 μL PBS per g initial grey matter ...
-
bioRxiv - Neuroscience 2023Quote: ... The homogenate was centrifuged at 11,300 revolutions per minute (RPM) for 10 min at 4°C using a Ti45 rotor (Beckman). The supernatant was filtered through a 70 μm pore size cell-strainer and retained on ice ...
-
bioRxiv - Neuroscience 2023Quote: ... The supernatant was transferred to fresh tubes and centrifuged at 100,000 x g for 70 min at 4°C using a Ti45 rotor (Beckman). The 100,000 x g pellets were resuspended in 1 mL ice-cold PBS and brought to 60 mL using PBS ...
-
bioRxiv - Microbiology 2022Quote: ... Cell debris was removed by centrifugation at 14,800 rpm for 20 minutes 4 °C in F241.5P rotor using 149 Microfuge 22R centrifuge (Beckman Coulter). The supernatant was combined with 100 µL of ANTI-FLAG M2 Affinity Gel (Sigma ...
-
bioRxiv - Neuroscience 2023Quote: ... The lysate was centrifuged at 40,000 rpm for 50 min at 4°C (45 Ti fixed-angle rotor, Beckman) and the transporter-Fab complex was isolated by affinity chromatography using Strep-Tactin resin ...
-
bioRxiv - Biochemistry 2023Quote: ... Cells were lysed by extrusion using a Teflon Dounce homogenizer and clarified by centrifugation at 30000g for 40 minutes at 4°C using a Ja 25.50 rotor (Beckman). The clarified lysate was incubated with 2 ml of pre-equilibrated Protein C affinity resin (Roche ...
-
bioRxiv - Cell Biology 2022Quote: ... Samples were ultracentrifuged at 100,000 g for 30 minutes at 4°C in a Optima XPN-100 ultracentrifuge (Beckman). Supernatants were kept aside as “Supernatant” fraction ...
-
bioRxiv - Microbiology 2023Quote: ... All centrifugation steps were performed at 4 °C in an Avanti J-E high-speed fixed-angle centrifuge (Beckman Coulter Life Sciences ...
-
bioRxiv - Microbiology 2023Quote: ... The tube was centrifuged for 3 hours at 150’000 x g (4°C) using a SW 32.1 Ti swinging bucket (369651, Beckman Coulter). Finally ...
-
bioRxiv - Biophysics 2023Quote: ... The supernatant was subjected to a second round of ultracentrifugation at 100,000 x g for 1 hour at 4°C in a Type 45Ti rotor (Beckman) to pellet cell membranes ...
-
bioRxiv - Plant Biology 2023Quote: ... Approximately 250 µl of crude EV sample resuspended in 20 mM Tris-HCl pH 6.0 was slowly dispensed on top of the column and centrifuged at 100,000 x g for 17 h at 4 ⁰C (SW 41 Ti rotor, Beckman Coulter ...
-
bioRxiv - Cell Biology 2023Quote: ... 20µM ATP and 1 mM DTT and subsequently sedimented (100,000 x g, 15 min, 4°C, TLA-100 rotor) in an Ultima MAX-XP ultracentrifuge (Beckman). For competition assays ...
-
bioRxiv - Cancer Biology 2023Quote: ... and centrifuged (33.500 rpm/4°C/3h, brake off) in a Optima XPN-80 ultracentrifuge (Beckman Coulter, Krefeld, Germany). Sucrose gradients were eluted into a BR-188 density gradient fractionation system (Brandel Inc ...
-
bioRxiv - Plant Biology 2023Quote: ... It was then centrifuged again at 100,000 x g for 1 h at 4 ⁰C (TLA 55 rotor, Beckman Coulter ...
-
bioRxiv - Cell Biology 2023Quote: ... and 1 mM PMSF) and centrifuged for 15 hours at 4°C with 74,400 xg (SW 32.1 Ti; Beckman Coulter). 24 equal volume fractions were collected from the top and subjected to TCA precipitation ...
-
bioRxiv - Biophysics 2023Quote: ... placed in an An50Ti rotor and centrifugated 50,000 rpm at 4 °C using an Optima XL-I analytical ultracentrifuge (Beckman). The data were analysed in SEDFIT-16.1c 53 using a c(s ...
-
bioRxiv - Plant Biology 2023Quote: ... The tubes were then centrifuged at 100,000 x g for 1 h at 4 ⁰C (TLA 55 rotor, Beckman Coulter ...
-
bioRxiv - Biochemistry 2023Quote: ... at 40% on a Branson Digital Sonifier and clarified by centrifugation for 30 minutes at 27,216 × g at 4°C in an SS-34 rotor (Avanti J-25 centrifuge, Beckman).
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was clarified by centrifugation (183,960 x g, 88 min, 4°C) in a Type 70Ti rotor (Beckman). The supernatant was mixed with 2 mL of IgG Sepharose 6 Fast Flow beads (Cytiva ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was clarified via centrifugation (66,000 x g, 30 min, 4°C) in a Type 70 Ti rotor (Beckman). The supernatant was mixed with 1.5 mL of anti-FLAG M2 affinity gel (Sigma-Aldrich ...
-
bioRxiv - Immunology 2022Quote: ... then samples were centrifuged at 2,700 RPM for 10 minutes at 4°C in a tabletop centrifuge (Beckman Coulter). The supernatant (serum ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and the pellet was resuspended in 25 ∝l lysis buffer ...
-
bioRxiv - Cell Biology 2023Quote: ... Gradients were spun at 45,000 RPM for 16 hours at 4°C in SW55Ti rotor using an ultracentrifuge (Beckman). After centrifugation ...
-
Comparative membrane proteomics reveals diverse cell regulators concentrated at the nuclear envelopebioRxiv - Cell Biology 2023Quote: ... The gradients then were centrifuged at 35,000 rpm (210,000g) for 1 h at 4°C with no brake in an SW41Ti rotor (Beckman Coulter). Two samples were collected from the nucleus gradient ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was then clarified (using a JA 25.50 Beckman rotor at 40000x g for 30 min, 4°C) and the soluble fraction was incubated with 2 ml of Glutathione Sepharose 4B resin for 2h at 4°C under constant agitation ...
-
bioRxiv - Cancer Biology 2023Quote: ... 100 μg/mL cycloheximide if reaction contained cycloheximide) for 3.5 hrs at 240,000 g at 4 °C using a SW41 rotor (Beckman Coulter). Gradients were fractionated using Teledyne Isco Tris Peristaltic Pump and fractions were collected and pooled according to the UV trace ...
-
bioRxiv - Biochemistry 2023Quote: ... Density gradient centrifugation was done at 50,000 rpm for two hours at 4 °C using a 70.1 Ti rotor (Beckman Coulter). Post centrifugation ...
-
bioRxiv - Neuroscience 2023Quote: ... the supernatant was collected and applied for further centrifugation at 40,000 rpm for 1 h at 4°C (45 Ti fixed-angle rotor, Beckman) to pellet the membranes ...
-
bioRxiv - Immunology 2023Quote: ... and then centrifuged at 260,800 x g for 2.5 h at 4°C in an Optima L-100XP ultracentrifuge (Beckman–Coulter) using the SW41Ti rotor with brake ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and Red-C12 fluorescence of the starting material ...
-
bioRxiv - Genomics 2023Quote: ... followed by centrifugation at 31,900 ×g (10 min, 4 °C, JA-20 rotor, Avanti J-26 XP, Beckman Coulter). Next ...
-
bioRxiv - Biophysics 2023Quote: ... and the resulting lysate was cleared by centrifugation at 279,288 × g for 10 minutes at 4°C using a tabletop centrifuge unit from Beckman Coulter ...
-
bioRxiv - Neuroscience 2023Quote: ... NP-40 prepared in DPBS] and then ultracentrifuged at 100,000x g for 1 h at 4 °C using a TLA-55 rotor (Beckman). The supernatant was removed ...
-
bioRxiv - Cell Biology 2023Quote: ... After cell debris and undisrupted cells were removed by centrifugation (45,000 rpm, 30 min, 4°C, 70Ti rotor; Beckman), supernatant was applied to an open column with Ni-IMAC resin (BIO-RAD) ...
-
bioRxiv - Biochemistry 2023Quote: ... at 18000 PSI and cell debris were separated by centrifugation (4 °C, 30 min, 75,600 ×g, JA25.50 rotor Beckman Coulter). The supernatant was loaded on an affinity chromatography column (GE Healthcare ...
-
bioRxiv - Cell Biology 2023Quote: ... Equilibrated tubes were ultra-centrifuged at 100,000xg for 1h at 4°C using a swinging-bucket rotor (SW 32Ti, Beckman Coulter ...
-
bioRxiv - Cell Biology 2023Quote: ... of proteins were applied on the top of a 16 ml 10-30% continuous sucrose density gradient and centrifuged at 74,400 g for 15 h at 4 °C (SW 32.1 Ti; Beckman Coulter). 24 equal volume fractions were collected ...
-
bioRxiv - Molecular Biology 2023Quote: ... Small extracellular vesicles were pelleted at 100,000 X g for 1,5 h at 4°C by using Ti-45 rotor (Beckman Coulter) and 70 ml polycarbonate bottles (Beckman Coulter ...
-
bioRxiv - Molecular Biology 2023Quote: ... Pellets were pooled in 1 ml PBS and centrifuged at 100,000 X g for 1,5 h at 4°C in 1,5 ml tubes in a Ti-45 rotor (Beckman Coulter) using adapters (#11004 ...
-
bioRxiv - Neuroscience 2023Quote: ... the liposomes were isolated by centrifugation for 3 h 40 mins at 55,000 rpm at 4°C in a SW 60 rotor (SW 60 Ti, Beckman). 20 µl were harvested from the top of the gradient and mixed with 8 µl of 4x Laemmli buffer (final 62.5 mM Tris-HCl ...
-
bioRxiv - Plant Biology 2023Quote: ... The cel lysates were clarified by high-speed centrifugation at 50,000g for 60 min at 4°C (Avanti J-26 XP centrifuge with JA-25.50 rotor; Beckman Coulter), followed by a 0.45-mm filtration (Millex-HP ...
-
An adaptive biomolecular condensation response is conserved across environmentally divergent speciesbioRxiv - Cell Biology 2023Quote: ... 500 µL was transferred to a vacuum safe tube spun at 100,000 g for 20 minutes at 4°C (fixed-angle TLA-55 rotor in a Beckman Coulter Optimax tabletop ultracentrifuge) ...