Labshake search
Citations for Beckman :
751 - 800 of 1791 citations for 4 1 tert butoxycarbonyl piperidin 3 yl benzoic acid since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Plant Biology 2023Quote: ... The cel lysates were clarified by high-speed centrifugation at 50,000g for 60 min at 4°C (Avanti J-26 XP centrifuge with JA-25.50 rotor; Beckman Coulter), followed by a 0.45-mm filtration (Millex-HP ...
-
bioRxiv - Molecular Biology 2024Quote: ... Virus was then purified by centrifugation through a 20% sucrose cushion at 25,000 rpm for 2.5 hours at 4 °C in a Sw32Ti rotor (Beckman Coulter). Virus pellets were resuspended in PBS and virus genomic RNA copy number was quantified by RTqPCR as described above ...
-
Ribonuclease Inhibitor and Angiogenin collaboratively regulate cell-type-specific global translationbioRxiv - Biochemistry 2024Quote: ... and were centrifuged at 39,000 rpm for 2.45 hours at 4°C using Optima XPN-80 Ultracentrifuge (Beckman Coulter). Following centrifugation ...
-
bioRxiv - Microbiology 2023Quote: ... The denatured protein fraction was then removed via ultracentrifugation at 100,000 g for 20 min at 4°C (Beckman Coulter Optima XE-90 – IVD ultracentrifuge with a 42.2 Ti rotor) ...
-
bioRxiv - Molecular Biology 2023Quote: ... Small extracellular vesicles were pelleted at 100,000 X g for 1,5 h at 4°C by using Ti-45 rotor (Beckman Coulter) and 70 ml polycarbonate bottles (Beckman Coulter ...
-
bioRxiv - Molecular Biology 2023Quote: ... Pellets were pooled in 1 ml PBS and centrifuged at 100,000 X g for 1,5 h at 4°C in 1,5 ml tubes in a Ti-45 rotor (Beckman Coulter) using adapters (#11004 ...
-
bioRxiv - Cancer Biology 2023Quote: ... the obtained supernatant was filtered through a 0.22 μm filter before ultracentrifugation at 150,000 g for 2 h at 4 °C (Beckman Coulter). The nsEV-containing pellet was resuspended in phosphate buffer saline (PBS).
-
bioRxiv - Cell Biology 2023Quote: ... Equilibrated tubes were ultra-centrifuged at 100,000xg for 1h at 4°C using a swinging-bucket rotor (SW 32Ti, Beckman Coulter ...
-
bioRxiv - Cell Biology 2023Quote: ... of proteins were applied on the top of a 16 ml 10-30% continuous sucrose density gradient and centrifuged at 74,400 g for 15 h at 4 °C (SW 32.1 Ti; Beckman Coulter). 24 equal volume fractions were collected ...
-
bioRxiv - Biochemistry 2023Quote: ... at 18000 PSI and cell debris were separated by centrifugation (4 °C, 30 min, 75,600 ×g, JA25.50 rotor Beckman Coulter). The supernatant was loaded on an affinity chromatography column (GE Healthcare ...
-
bioRxiv - Immunology 2022Quote: ... stained bacteria were then sonicated for 4 min (0.5 cycle, 75 A, VialTweeter) followed by determination of concentration using flow cytometry (CytoFlex; Beckman Coulter ...
-
bioRxiv - Microbiology 2022Quote: ... Fractions were diluted in 5 ml PBS and washed by ultracentrifugation at 200,000 × g (60 min, 4°C, AH-650 rotor, 5 ml Beckman Ultra-Clear tubes ...
-
bioRxiv - Microbiology 2022Quote: ... 100 ml cell cultures were grown over night and harvested by centrifugation at 15,000 x g for 15 min at 4 °C (Beckman JLA-16.250 rotor ...
-
bioRxiv - Microbiology 2022Quote: ... 100 ml cell cultures were grown over night and harvested by centrifugation at 15,000 x g for 15 min at 4 °C (Beckman JLA-16.250 rotor, Beckman Avanti J-25, Beckman Coulter). Pellets were washed with 20 mM potassium phosphate (pH 7.5 ...
-
bioRxiv - Microbiology 2022Quote: ... The supernatant fractions were collected and centrifuged at 75,600 x g for 90 min at 4 °C (Beckman JA25.50 rotor, Beckman Avanati J-25, Beckman Coulter). The resulting pellets were washed again and resuspended in 500 μl potassium phosphate buffer ...
-
bioRxiv - Biochemistry 2022Quote: ... The lysate was clarified by centrifugation at 48000×g for 45 min at 4°C using a JA-25.50 rotor (Beckman), and applied on a XK 16/20 chromatography column (Cytiva ...
-
bioRxiv - Biochemistry 2022Quote: ... The elutions were combined and centrifuged at 100,000 rpm at 4°C for 40 minutes in a TLA120.2 rotor (Beckman Coulter) before resuspension of the ribosomal pellet in RNC buffer containing 1 μM ternatin-4 ...
-
bioRxiv - Developmental Biology 2022Quote: ... Gradients were centrifuged at 35.000 g for 3h at 4°C in an ultracentrifuge using the SW40ti rotor head (Beckman). Fractions of 1 mL were collected from the top at 1 mL/min ...
-
Reducing mitochondrial ribosomal gene expression does not alter metabolic health or lifespan in micebioRxiv - Cell Biology 2022Quote: ... and then purified using 30% Percoll gradient ultracentrifugation at 95,000g for 30 minutes at +4°C (Beckman sv41 rotor). Purified mitochondria were treated 1:200 with a protease inhibitor cocktail (Thermo Fisher Scientific HALT PI ...
-
bioRxiv - Genomics 2022Quote: ... All samples were acquired on a Beckman Coulter CytoFLEX S with 4 lasers (405nm, 488nm, 561nm, 638nm) (Beckman Coulter), and operated by CytExpert Software v2.3 (Beckman Coulter ...
-
bioRxiv - Neuroscience 2022Quote: ... and ultracentrifuged at 25,000 g for 20 min 4°C (or 50,000 g for 30 min 4°C) in a Beckman TLA100.3 rotor (Optima™ TLX Ultracentrifuge, Beckman). The pellet was discarded ...
-
bioRxiv - Microbiology 2022Quote: ... The gradient was centrifuged at 4°C and 35,000 rpm for 2.5 h using an SW 40 Ti rotor (Beckman Coulter). Afterward ...
-
bioRxiv - Microbiology 2022Quote: ... which was spun in a ultracentrifuge at 30,000 x g for 2h at 4°C (SW 60 Ti rotor, Beckman) The pellet was resuspended in 20 μl of PBS for 1 h at 4 °C ...
-
bioRxiv - Molecular Biology 2023Quote: ... The gradients were centrifuged at 38,300 rpm for 2 hours and 45 min at 4 °C in a SW-40Ti (Beckman) rotor using an Optima XE-100 Ultracentrifuge (Beckman) ...
-
bioRxiv - Molecular Biology 2023Quote: ... The gradients were centrifuged at 38,300 rpm for 2 hours and 45 min at 4 °C in a SW-40Ti (Beckman) rotor using an Optima XE-100 Ultracentrifuge (Beckman) ...
-
bioRxiv - Plant Biology 2023Quote: ... Extract was then centrifuged at 40 000 rpm for 2 hours at 4°C using the 50Ti rotor (Beckman). A protocole previsouly used in the laboratory and described in Maclot et al ...
-
bioRxiv - Microbiology 2022Quote: ... Glycoproteins in the supernatants were pelleted by centrifugation at 100,000×g at 4°C for 90 min using a TLA-55 rotor (Beckman). The resultant pellets ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was clarified by centrifugation (183,960 x g, 88 min, 4°C) in a Type 70Ti rotor (Beckman). The supernatant was mixed with 2 mL of IgG Sepharose 6 Fast Flow beads (Cytiva ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was clarified via centrifugation (66,000 x g, 30 min, 4°C) in a Type 70 Ti rotor (Beckman). The supernatant was mixed with 1.5 mL of anti-FLAG M2 affinity gel (Sigma-Aldrich ...
-
bioRxiv - Immunology 2022Quote: ... then samples were centrifuged at 2,700 RPM for 10 minutes at 4°C in a tabletop centrifuge (Beckman Coulter). The supernatant (serum ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and the pellet was resuspended in 25 ∝l lysis buffer ...
-
bioRxiv - Cell Biology 2023Quote: ... Gradients were spun at 45,000 RPM for 16 hours at 4°C in SW55Ti rotor using an ultracentrifuge (Beckman). After centrifugation ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was then clarified (using a JA 25.50 Beckman rotor at 40000x g for 30 min, 4°C) and the soluble fraction was incubated with 2 ml of Glutathione Sepharose 4B resin for 2h at 4°C under constant agitation ...
-
bioRxiv - Cancer Biology 2023Quote: ... 100 μg/mL cycloheximide if reaction contained cycloheximide) for 3.5 hrs at 240,000 g at 4 °C using a SW41 rotor (Beckman Coulter). Gradients were fractionated using Teledyne Isco Tris Peristaltic Pump and fractions were collected and pooled according to the UV trace ...
-
bioRxiv - Biochemistry 2023Quote: ... Density gradient centrifugation was done at 50,000 rpm for two hours at 4 °C using a 70.1 Ti rotor (Beckman Coulter). Post centrifugation ...
-
bioRxiv - Immunology 2023Quote: ... and then centrifuged at 260,800 x g for 2.5 h at 4°C in an Optima L-100XP ultracentrifuge (Beckman–Coulter) using the SW41Ti rotor with brake ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and Red-C12 fluorescence of the starting material ...
-
bioRxiv - Cell Biology 2024Quote: ... The lysate was clarified by centrifugation (66,000 x g, 30 minutes, 4 °C) in a Type 70Ti rotor (Beckman). For His-ZZ-TEV-Halo-CCSer2650–850 ...
-
bioRxiv - Cell Biology 2024Quote: ... 0.1 mM PMSF buffer and subjected to ultracentrifugation at 36,000 rpm at 4°C for 2h using a SW41 rotor (Beckman) and 14 x 89 mm polypropylene tubes (Beckman ...
-
bioRxiv - Microbiology 2024Quote: ... Samples within each biological replicate were centrifuged simultaneously for 2.5 h at 209,490 x g and 4°C using the SW41Ti rotor in an LE-80 ultracentrifuge (Beckman). Subsequently ...
-
bioRxiv - Cell Biology 2024Quote: ... Solutions of 15% and 23% Optiprep were layered on top or below the sample and centrifuged at 4°C for 16 h at 120,000g in a SW 28 Ti swinging bucket rotor (Beckman).
-
bioRxiv - Cell Biology 2024Quote: ... The gradients were centrifuged at 39,000 rpm for 2.5 h at 4°C using a SW41Ti rotor (Beckman Instruments), and 21 fractions of 0.5 ml were collected ...
-
bioRxiv - Neuroscience 2024Quote: ... The supernatant was passed through a 0.22 μm filter before undergoing ultracentrifugation at 100,000g for 70 min at 4°C (Optima-XE SW41 Beckman Coulter). The resulting pellet was then resuspended in 2 ml of 0.475 M sucrose solution prepared in double-filtered PBS ...
-
bioRxiv - Molecular Biology 2024Quote: ... Proliferation was measured after 4-5 days either by trypan-blue mediated count (Vi-cell blu counter, Beckman Coulter), or by adding the Prestoblue dye (Life Technologies ...
-
bioRxiv - Microbiology 2024Quote: ... were centrifuged at approximately 108,000 x g for 107 min at 4°C using an ultracentrifuge device equipped with a TLA 100.3 fixed-angle rotor (Beckman). The supernatants were retained as soluble fractions and kept at 4°C for downstream analyses ...
-
bioRxiv - Immunology 2024Quote: ... Sartorus) at 100,000 x g for 70 min at 4°C using the ultracentrifuge Optima MAX-TL (Beckman Coulter). The pellets were suspended in PBS(– ...
-
bioRxiv - Cell Biology 2024Quote: ... The lysate was clarified via centrifugation (66,000 x g, 30 minutes, 4 °C) in a Type 70 Ti rotor (Beckman). The supernatant was mixed with 1.5 mL of α-FLAG M2 affinity gel (Sigma–Aldrich ...
-
bioRxiv - Cell Biology 2024Quote: ... The lysate was clarified by centrifugation (183,960 x g, 88 minutes, 4 °C) in a Type 70Ti rotor (Beckman). The supernatant was mixed with 2 mL of IgG Sepharose 6 Fast Flow beads (Cytiva ...
-
bioRxiv - Biochemistry 2024Quote: ... The unbroken cells and debris were removed by centrifugation at 20,000 x g for 10 min at 4 °C (Beckman Coulter Avanti J20 XPI centrifuge ...
-
bioRxiv - Biochemistry 2024Quote: ... dimethylammonio)-1-propanesulfonate)] and lysates were cleared by centrifugation at 75,600 g at 4 °C for 30 min using a JA 25.50 rotor (Beckman-Coulter). Next ...