Labshake search
Citations for Beckman :
701 - 750 of 1481 citations for 2 4 Methyl 5 thiazolyl ethyl decanoate since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and the pellet was resuspended in 25 ∝l lysis buffer ...
-
bioRxiv - Cell Biology 2023Quote: ... Gradients were spun at 45,000 RPM for 16 hours at 4°C in SW55Ti rotor using an ultracentrifuge (Beckman). After centrifugation ...
-
Comparative membrane proteomics reveals diverse cell regulators concentrated at the nuclear envelopebioRxiv - Cell Biology 2023Quote: ... The gradients then were centrifuged at 35,000 rpm (210,000g) for 1 h at 4°C with no brake in an SW41Ti rotor (Beckman Coulter). Two samples were collected from the nucleus gradient ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was then clarified (using a JA 25.50 Beckman rotor at 40000x g for 30 min, 4°C) and the soluble fraction was incubated with 2 ml of Glutathione Sepharose 4B resin for 2h at 4°C under constant agitation ...
-
bioRxiv - Cancer Biology 2023Quote: ... 100 μg/mL cycloheximide if reaction contained cycloheximide) for 3.5 hrs at 240,000 g at 4 °C using a SW41 rotor (Beckman Coulter). Gradients were fractionated using Teledyne Isco Tris Peristaltic Pump and fractions were collected and pooled according to the UV trace ...
-
bioRxiv - Biochemistry 2023Quote: ... Density gradient centrifugation was done at 50,000 rpm for two hours at 4 °C using a 70.1 Ti rotor (Beckman Coulter). Post centrifugation ...
-
bioRxiv - Neuroscience 2023Quote: ... the supernatant was collected and applied for further centrifugation at 40,000 rpm for 1 h at 4°C (45 Ti fixed-angle rotor, Beckman) to pellet the membranes ...
-
bioRxiv - Immunology 2023Quote: ... and then centrifuged at 260,800 x g for 2.5 h at 4°C in an Optima L-100XP ultracentrifuge (Beckman–Coulter) using the SW41Ti rotor with brake ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and Red-C12 fluorescence of the starting material ...
-
bioRxiv - Genomics 2023Quote: ... followed by centrifugation at 31,900 ×g (10 min, 4 °C, JA-20 rotor, Avanti J-26 XP, Beckman Coulter). Next ...
-
bioRxiv - Biophysics 2023Quote: ... and the resulting lysate was cleared by centrifugation at 279,288 × g for 10 minutes at 4°C using a tabletop centrifuge unit from Beckman Coulter ...
-
bioRxiv - Neuroscience 2023Quote: ... NP-40 prepared in DPBS] and then ultracentrifuged at 100,000x g for 1 h at 4 °C using a TLA-55 rotor (Beckman). The supernatant was removed ...
-
bioRxiv - Cell Biology 2023Quote: ... After cell debris and undisrupted cells were removed by centrifugation (45,000 rpm, 30 min, 4°C, 70Ti rotor; Beckman), supernatant was applied to an open column with Ni-IMAC resin (BIO-RAD) ...
-
bioRxiv - Biochemistry 2023Quote: ... at 18000 PSI and cell debris were separated by centrifugation (4 °C, 30 min, 75,600 ×g, JA25.50 rotor Beckman Coulter). The supernatant was loaded on an affinity chromatography column (GE Healthcare ...
-
bioRxiv - Cell Biology 2023Quote: ... Equilibrated tubes were ultra-centrifuged at 100,000xg for 1h at 4°C using a swinging-bucket rotor (SW 32Ti, Beckman Coulter ...
-
bioRxiv - Cell Biology 2023Quote: ... of proteins were applied on the top of a 16 ml 10-30% continuous sucrose density gradient and centrifuged at 74,400 g for 15 h at 4 °C (SW 32.1 Ti; Beckman Coulter). 24 equal volume fractions were collected ...
-
bioRxiv - Molecular Biology 2023Quote: ... Small extracellular vesicles were pelleted at 100,000 X g for 1,5 h at 4°C by using Ti-45 rotor (Beckman Coulter) and 70 ml polycarbonate bottles (Beckman Coulter ...
-
bioRxiv - Molecular Biology 2023Quote: ... Pellets were pooled in 1 ml PBS and centrifuged at 100,000 X g for 1,5 h at 4°C in 1,5 ml tubes in a Ti-45 rotor (Beckman Coulter) using adapters (#11004 ...
-
bioRxiv - Neuroscience 2023Quote: ... the liposomes were isolated by centrifugation for 3 h 40 mins at 55,000 rpm at 4°C in a SW 60 rotor (SW 60 Ti, Beckman). 20 µl were harvested from the top of the gradient and mixed with 8 µl of 4x Laemmli buffer (final 62.5 mM Tris-HCl ...
-
bioRxiv - Plant Biology 2023Quote: ... The cel lysates were clarified by high-speed centrifugation at 50,000g for 60 min at 4°C (Avanti J-26 XP centrifuge with JA-25.50 rotor; Beckman Coulter), followed by a 0.45-mm filtration (Millex-HP ...
-
An adaptive biomolecular condensation response is conserved across environmentally divergent speciesbioRxiv - Cell Biology 2023Quote: ... 500 µL was transferred to a vacuum safe tube spun at 100,000 g for 20 minutes at 4°C (fixed-angle TLA-55 rotor in a Beckman Coulter Optimax tabletop ultracentrifuge) ...
-
bioRxiv - Systems Biology 2023Quote: ... Two libraries were prepared and sequenced: one with size-based selection for mRNA >4 kb using AMPure beads (Beckman) and a second library with no size selection.
-
bioRxiv - Microbiology 2023Quote: ... The denatured protein fraction was then removed via ultracentrifugation at 100,000 g for 20 min at 4°C (Beckman Coulter Optima XE-90 – IVD ultracentrifuge with a 42.2 Ti rotor) ...
-
bioRxiv - Biochemistry 2023Quote: ... The mixture was incubated for 30 min at 4 °C and centrifuged at 100,000 × g at 4 °C for 1 h using a TLA100 fixed angle rotor (Beckman). The supernatant fraction was carefully removed ...
-
bioRxiv - Plant Biology 2024Quote: ... the supernatant after the 40,000 g spin was transferred to ultracentrifuge tubes and centrifuged at 100,000 g for 1 h at 4 °C (TLA100.3 rotor, Optima TLX Ultracentrifuge; Beckman Coulter). P40 and P100-P40 pellets were resuspended in cold and filtered VIB or 100 mM Tris pH 7.4 and either used immediately or stored at –80 °C until further use.
-
bioRxiv - Plant Biology 2024Quote: ... tubes and centrifuged at 40,000 g for 1 h at 4 °C (TLA100.3 rotor, Optima TLX Ultracentrifuge; Beckman Coulter). Where indicated ...
-
bioRxiv - Cell Biology 2024Quote: ... The lysate was clarified by centrifugation (183,960 x g, 88 minutes, 4 °C) in a Type 70Ti rotor (Beckman). The supernatant was mixed with 2 mL of IgG Sepharose 6 Fast Flow beads (Cytiva ...
-
bioRxiv - Cell Biology 2024Quote: ... The lysate was clarified via centrifugation (66,000 x g, 30 minutes, 4 °C) in a Type 70 Ti rotor (Beckman). The supernatant was mixed with 1.5 mL of α-FLAG M2 affinity gel (Sigma–Aldrich ...
-
bioRxiv - Cell Biology 2024Quote: ... The lysate was clarified by centrifugation (66,000 x g, 30 minutes, 4 °C) in a Type 70Ti rotor (Beckman). For His-ZZ-TEV-Halo-CCSer2650–850 ...
-
bioRxiv - Biochemistry 2024Quote: ... dimethylammonio)-1-propanesulfonate)] and lysates were cleared by centrifugation at 75,600 g at 4 °C for 30 min using a JA 25.50 rotor (Beckman-Coulter). Next ...
-
bioRxiv - Neuroscience 2024Quote: ... EV-depleted FBS medium was obtained by the ultracentrifugation of BV-2 complete medium supplemented with 20% FBS for 18h at 100.000 × g and 4°C in 38.5 mL polyallomer Ultra Clear ultracentrifuge tubes (Beckman Coulter), using an Optima XPN-80 ultracentrifuge and an SW 32 Ti Rotor (Beckman Coulter ...
-
bioRxiv - Molecular Biology 2024Quote: ... The samples were ultracentrifuged at 100,000 × g for 135 min at 4°C (MLA-55 rotor, Beckman Coulter, USA). After removal of the supernatant ...
-
bioRxiv - Cell Biology 2024Quote: ... Solutions of 15% and 23% Optiprep were layered on top or below the sample and centrifuged at 4°C for 16 h at 120,000g in a SW 28 Ti swinging bucket rotor (Beckman).
-
bioRxiv - Cell Biology 2024Quote: ... The gradients were centrifuged at 39,000 rpm for 2.5 h at 4°C using a SW41Ti rotor (Beckman Instruments), and 21 fractions of 0.5 ml were collected ...
-
bioRxiv - Microbiology 2024Quote: ... were centrifuged at approximately 108,000 x g for 107 min at 4°C using an ultracentrifuge device equipped with a TLA 100.3 fixed-angle rotor (Beckman). The supernatants were retained as soluble fractions and kept at 4°C for downstream analyses ...
-
bioRxiv - Microbiology 2024Quote: ... Phage particles were pelleted by centrifugation at 75,000 x g at 4°C for 1 h using a 50.2 Ti rotor (Beckman Coulter) and resuspended in the phage buffer.
-
bioRxiv - Neuroscience 2024Quote: ... The homogenate was layered on the gradient and centrifuged (3h, 4°C, 160,000 xg) using a SW40 rotor (Beckman). Top layer of debris was removed and ∼18 fractions of 500 µl were collected from each gradient from top (fraction 1 ...
-
bioRxiv - Cell Biology 2024Quote: ... 0.1 mM PMSF buffer and subjected to ultracentrifugation at 36,000 rpm at 4°C for 2h using a SW41 rotor (Beckman) and 14 x 89 mm polypropylene tubes (Beckman ...
-
bioRxiv - Biophysics 2024Quote: ... Lysates were clarified by ultracentrifugation at 34,000 rpm for 45 minutes at 4°C in a Type 45.1 Ti rotor (Beckman-Coulter). The supernatants were then passed through a 0.22 μm syringe sterile filter (Thermo-Fisher ...
-
Syntaxin-2 inhibits excessive phagocytic uptake but promotes phagolysosomal clearance in macrophagesbioRxiv - Cell Biology 2024Quote: ... The samples were then centrifuged at 100,000 g for 1 hr at 4°C using a SW40Ti rotor (Beckman). Phagosomes were recovered from the interface of 10 and 25% sucrose (Fig ...
-
bioRxiv - Cell Biology 2024Quote: ... and the membranes were pelleted at 100,000 g for one hour at 4°C in a TLA 100.3 rotor (Beckman-Coulter). Afterwards the supernatant was taken off and stored at −20°C (“S100” ...
-
bioRxiv - Biochemistry 2024Quote: ... The unbroken cells and debris were removed by centrifugation at 20,000 x g for 10 min at 4 °C (Beckman Coulter Avanti J20 XPI centrifuge ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... containing cell nucleus and other heavy organelles was discarded and supernatant was centrifuged for 30 min at 48,000 × g at 4 °C (Beckman Avanti J-251 Ultra-centrifuge ...
-
bioRxiv - Neuroscience 2024Quote: ... Tubes were centrifugated at 100,000 x g (32,500 RPM) for 3 hours at 4°C using a SW55Ti rotor (Beckman Coulter). Synaptosomes enriched in the interface between 1.0-1.25 M sucrose were collected and diluted with ice-cold 0.1 mM CaCl2 ...
-
bioRxiv - Neuroscience 2024Quote: ... The supernatant was passed through a 0.22 μm filter before undergoing ultracentrifugation at 100,000g for 70 min at 4°C (Optima-XE SW41 Beckman Coulter). The resulting pellet was then resuspended in 2 ml of 0.475 M sucrose solution prepared in double-filtered PBS ...
-
bioRxiv - Microbiology 2024Quote: ... the supernatants were loaded onto 1 mL of 30% sucrose in PBS buffer and centrifuged at 25,000 rpm at 4°C for 3 hours using the 90AT rotor (Beckman). The pelleted viral particles were resuspended in 100 μL of PBS and fixed with formaldehyde (working concentration 0.1% ...
-
bioRxiv - Bioengineering 2024Quote: ... the suspension was centrifuged at 10,000 RPM for 10 min at first and 30,000 RPM for 4 hours (Optima XPN-80, Beckman Coulter), and the supernatant was collected to remove the precipitates ...
-
bioRxiv - Immunology 2024Quote: ... Sartorus) at 100,000 x g for 70 min at 4°C using the ultracentrifuge Optima MAX-TL (Beckman Coulter). The pellets were suspended in PBS(– ...
-
bioRxiv - Bioengineering 2024Quote: ... for 15 minutes and centrifuged at 10,000 x g for 25 minutes at 4°C (JA20 rotor, Beckman Coulter). The supernatant containing the recombinant proteins was filtered through a 0.45 µm sterile filter (Whatman Puradisc) ...
-
bioRxiv - Biophysics 2024Quote: ... The supernatant was then centrifuged for 1 h at 38000 rpm and 4 °C in a TI45 rotor (Beckman) to pellet the membranes ...