Labshake search
Citations for Beckman :
501 - 550 of 1527 citations for G Protein Signaling Modulator 1 GPSM1 Antibody since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2022Quote: ... and ultracentrifuged at 25,000 g for 20 min 4°C (or 50,000 g for 30 min 4°C) in a Beckman TLA100.3 rotor (Optima™ TLX Ultracentrifuge, Beckman). The pellet was discarded ...
-
bioRxiv - Microbiology 2022Quote: ... which was spun in a ultracentrifuge at 30,000 x g for 2h at 4°C (SW 60 Ti rotor, Beckman) The pellet was resuspended in 20 μl of PBS for 1 h at 4 °C ...
-
bioRxiv - Microbiology 2022Quote: CsCl linear gradients were prepared by overlaying 8.5 mL of 1.46 g/cm3 CsCl solution with 8.5 mL of 1.2 g/cm3 CsCl solution in 17 mL Ultra-Clear tubes (Beckman Coulter), which were then spun at a 45-degree angle and a speed of 20 rpm for 13.5 minutes using Gradient Master (BioComp).
-
bioRxiv - Neuroscience 2022Quote: ... supernatant was centrifuged for 3 h at 115,000 g and 4°C using the XPN-80 ultracentrifuge equipped with a Ti70 rotor (Beckman). EV pellets were resolved in 1 mL ice-cold PBS (Gibco ...
-
bioRxiv - Microbiology 2022Quote: ... Glycoproteins in the supernatants were pelleted by centrifugation at 100,000×g at 4°C for 90 min using a TLA-55 rotor (Beckman). The resultant pellets ...
-
bioRxiv - Microbiology 2022Quote: ... samples were centrifuged at 44,000 RPM (190,600 g) for 120 hours at 20°C in a VTi 65.2 Rotor (Beckman Coulter; 362754). For each sample ...
-
bioRxiv - Neuroscience 2023Quote: ... This suspension was then subject to ultra-centrifugation at 1.75 × 105 x g in a TL100 centrifuge (Beckman Coulter) to pellet cellular debris ...
-
bioRxiv - Microbiology 2022Quote: ... The gradient was spun at 45,000 rpm (~200,000 x g) for 6 hours at 4 °C in a SW60Ti rotor (Beckman Coulter). Successive 0.4 mL fractions were collected by pipetting and their densities measured ...
-
bioRxiv - Cell Biology 2022Quote: ... The stock solution of aggregate-depleted BSA (5% w/v) was prepared by overnight centrifugation at 100,000 x g (SW28 rotor Beckman Coulter ...
-
bioRxiv - Cell Biology 2022Quote: ... Samples were ultracentrifuged at 100,000 g for 30 minutes at 4°C in a Optima XPN-100 ultracentrifuge (Beckman). Supernatants were kept aside as “Supernatant” fraction ...
-
bioRxiv - Neuroscience 2023Quote: ... DTT-treated EVs were pelleted at 100,000 x g for 70 min at 4°C in a TLA100 rotor (Beckman). The supernatant ...
-
bioRxiv - Neuroscience 2023Quote: ... The prepared gradients were centrifuged at 200,000 x g for 16 h at 4°C in an SW41Ti rotor (Beckman), with no braking during deceleration ...
-
bioRxiv - Neuroscience 2023Quote: ... The supernatant was transferred to fresh tubes and centrifuged at 100,000 x g for 70 min at 4°C using a Ti45 rotor (Beckman). The 100,000 x g pellets were resuspended in 1 mL ice-cold PBS and brought to 60 mL using PBS ...
-
bioRxiv - Microbiology 2023Quote: ... The lysates containing matured PsVs were loaded on an OptiPrep gradient that had been stabilized at least 1 h and centrifuged at 50k x g for 3.5-4 h at 4°C in a SW-55Ti rotor (Beckman). Fractions were collected in siliconized tubes and subjected to SDS-PAGE followed by Coomassie blue staining to assess the abundance of L1 and L2 proteins ...
-
bioRxiv - Plant Biology 2023Quote: ... Cell debris was removed by centrifugation at 1,300 g for 5 min (Beckman Centrifuge Avanti® J-26-XP). Afterwards ...
-
bioRxiv - Biophysics 2023Quote: ... and the resulting lysate was cleared by centrifugation at 279,288 × g for 10 minutes at 4°C using a tabletop centrifuge unit from Beckman Coulter ...
-
bioRxiv - Genomics 2023Quote: ... followed by centrifugation at 31,900 ×g (10 min, 4 °C, JA-20 rotor, Avanti J-26 XP, Beckman Coulter). Next ...
-
bioRxiv - Neuroscience 2023Quote: ... Samples were then centrifuged at 82,600×g at 4°C for 2 h (Beckman ultracentrifuge optima L-100 XP). After the first ultracentrifugation ...
-
An adaptive biomolecular condensation response is conserved across environmentally divergent speciesbioRxiv - Cell Biology 2023Quote: ... 500 µL was transferred to a vacuum safe tube spun at 100,000 g for 20 minutes at 4°C (fixed-angle TLA-55 rotor in a Beckman Coulter Optimax tabletop ultracentrifuge) ...
-
bioRxiv - Biophysics 2023Quote: ... The cells were pelleted from 2L cultures by centrifugation at 4,785 x g (5,000 rpm in Beckman JLA-8.1000) for 20 min ...
-
bioRxiv - Plant Biology 2023Quote: ... Approximately 250 µl of crude EV sample resuspended in 20 mM Tris-HCl pH 6.0 was slowly dispensed on top of the column and centrifuged at 100,000 x g for 17 h at 4 ⁰C (SW 41 Ti rotor, Beckman Coulter ...
-
bioRxiv - Biochemistry 2023Quote: ... at 40% on a Branson Digital Sonifier and clarified by centrifugation for 30 minutes at 27,216 × g at 4°C in an SS-34 rotor (Avanti J-25 centrifuge, Beckman).
-
bioRxiv - Plant Biology 2023Quote: ... The supernatant from this step was decanted into the new tubes and centrifuged at 39,800 x g for 2 h at 4 ⁰C (JA-17 rotor, Beckman Coulter ...
-
bioRxiv - Cancer Biology 2023Quote: ... Samples were sedimented onto poly-L-lysine coated coverslips at 12,000 rpm (22,579 x g) in an Avanti J-25 centrifuge (Beckman Coulter) for 1 hr and post-fixed with methanol for 5 min at −20 °C ...
-
bioRxiv - Molecular Biology 2023Quote: ... Individual cell-free virions were then purified by ultracentrifugation through a 20% sucrose (wt/vol in PBS) cushion at 83,000 g in an SW41 rotor (Beckman) for 2 h min at 4°C ...
-
bioRxiv - Cell Biology 2023Quote: ... was collected before ultracentrifugation at 100,000 g for 30 min at 23°C in a TLA100.3 rotors (Beckman & Coutler). Supernatant was discarded and pellet fractions were obtained by resuspending pellet in Laemmli buffer 1X with volume equal to the initial volume ...
-
bioRxiv - Cell Biology 2023Quote: ... was collected before ultracentrifugation at 100,000 g for 30 min at 23°C in a TLA100.3 rotors (Beckman & Coutler). Supernatant was discarded and pellet fractions were obtained by resuspending pellet in Laemmli buffer 1X with volume equal to the initial volume ...
-
bioRxiv - Cell Biology 2023Quote: ... 20µM ATP and 1 mM DTT and subsequently sedimented (100,000 x g, 15 min, 4°C, TLA-100 rotor) in an Ultima MAX-XP ultracentrifuge (Beckman). For competition assays ...
-
bioRxiv - Microbiology 2023Quote: ... The tube was centrifuged for 3 hours at 150’000 x g (4°C) using a SW 32.1 Ti swinging bucket (369651, Beckman Coulter). Finally ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was clarified by centrifugation (183,960 x g, 88 min, 4°C) in a Type 70Ti rotor (Beckman). The supernatant was mixed with 2 mL of IgG Sepharose 6 Fast Flow beads (Cytiva ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was clarified via centrifugation (66,000 x g, 30 min, 4°C) in a Type 70 Ti rotor (Beckman). The supernatant was mixed with 1.5 mL of anti-FLAG M2 affinity gel (Sigma-Aldrich ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and the pellet was resuspended in 25 ∝l lysis buffer ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was then clarified (using a JA 25.50 Beckman rotor at 40000x g for 30 min, 4°C) and the soluble fraction was incubated with 2 ml of Glutathione Sepharose 4B resin for 2h at 4°C under constant agitation ...
-
bioRxiv - Cancer Biology 2023Quote: ... 100 μg/mL cycloheximide if reaction contained cycloheximide) for 3.5 hrs at 240,000 g at 4 °C using a SW41 rotor (Beckman Coulter). Gradients were fractionated using Teledyne Isco Tris Peristaltic Pump and fractions were collected and pooled according to the UV trace ...
-
bioRxiv - Immunology 2023Quote: ... and then centrifuged at 260,800 x g for 2.5 h at 4°C in an Optima L-100XP ultracentrifuge (Beckman–Coulter) using the SW41Ti rotor with brake ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and Red-C12 fluorescence of the starting material ...
-
bioRxiv - Molecular Biology 2023Quote: ... and centrifuged them at 125,000 g (45,000 rpm) for 70 min (Optima Max TL with TLA-55 rotor, Beckman Coulter). The resultant sediment was dissolved in 40 µl of PBS and its protein concentration was estimated by a bicinchoninic acid (BCA ...
-
bioRxiv - Developmental Biology 2023Quote: ... The cytosolic lysate was layered on 10%-50% sucrose gradients and centrifuged at 246,000 g for 65 min in SW55 swinging bucket rotor (Beckman). Continuous UV absorbance was monitored with Triax flowcell monitor (BioComp).
-
bioRxiv - Molecular Biology 2023Quote: ... Small extracellular vesicles were pelleted at 100,000 X g for 1,5 h at 4°C by using Ti-45 rotor (Beckman Coulter) and 70 ml polycarbonate bottles (Beckman Coulter ...
-
bioRxiv - Molecular Biology 2023Quote: ... Pellets were pooled in 1 ml PBS and centrifuged at 100,000 X g for 1,5 h at 4°C in 1,5 ml tubes in a Ti-45 rotor (Beckman Coulter) using adapters (#11004 ...
-
bioRxiv - Biochemistry 2023Quote: ... The cell debris was removed by low-speed centrifugation for 30 minutes and the supernatant was further subjected to high-speed centrifugation at 150,000 × g for 120 minutes using a Ti-45 rotor (Beckman). Then the membrane component was resuspended and homogenized using a glass dounce homogenizer for 20 cycles on ice in solubilization buffer containing 50 mM HEPES pH 7.5 ...
-
bioRxiv - Cancer Biology 2023Quote: ... the obtained supernatant was filtered through a 0.22 μm filter before ultracentrifugation at 150,000 g for 2 h at 4 °C (Beckman Coulter). The nsEV-containing pellet was resuspended in phosphate buffer saline (PBS).
-
bioRxiv - Cancer Biology 2023Quote: ... The polymerized microtubules were centrifuged for 30 min at 18000 x g in a Microfuge 18 Centrifuge (Beckman Coulter). After centrifugation the pellet was resuspended in BRB80.
-
bioRxiv - Cell Biology 2023Quote: ... of proteins were applied on the top of a 16 ml 10-30% continuous sucrose density gradient and centrifuged at 74,400 g for 15 h at 4 °C (SW 32.1 Ti; Beckman Coulter). 24 equal volume fractions were collected ...
-
bioRxiv - Biochemistry 2023Quote: ... at 18000 PSI and cell debris were separated by centrifugation (4 °C, 30 min, 75,600 ×g, JA25.50 rotor Beckman Coulter). The supernatant was loaded on an affinity chromatography column (GE Healthcare ...
-
bioRxiv - Neuroscience 2023Quote: ... Fractions were washed by diluting with 7 mL of PBS and ultracentrifuged at 100,000 x g (Type 70.1 Ti rotor, Beckman Coulter) for 2 h ...
-
bioRxiv - Neuroscience 2023Quote: ... The tubes were centrifuged at 100,000 × g for 2 hours using a SW 55Ti swinging-bucket rotor (Beckman Coulter).
-
bioRxiv - Plant Biology 2024Quote: ... and centrifuged for 3 h at 260,000 g using an SW 55 Ti swinging-bucket rotor (Beckman Coulter, USA). The final supernatant was discarded ...
-
bioRxiv - Developmental Biology 2023Quote: ... the supernatant was centrifuged in a TLA100.4 fixed angle rotor at 100000 g for 1h at 37°C in an Optima TL ultracentrifuge (Beckman). The supernatant containing globular actin was collected ...
-
bioRxiv - Neuroscience 2024Quote: ... by centrifugation at 5,000 x g at 4°C for 30 minutes in a fixed angle rotor (Beckman Coulter). The qEV column washed with 1x PBS was then loaded with 500 µL of concentrated supernatant followed by 2.5 mL PBS to collect 3 mL void volume ...