Labshake search
Citations for Beckman :
451 - 500 of 1861 citations for 5 5 7 7 Tetramethyl 1 5 6 7 tetrahydrocyclopenta f indazol 4 amine since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Bioengineering 2023Quote: ... the centrifugation at 12,000 rpm 4 ℃ (Beckman Avanti J-26) for 30 mins was performed to remove cell debris ...
-
bioRxiv - Cell Biology 2022Quote: ... at 4°C in a TLA-55 rotor (Beckman Coulter) at maximum speed (186000 g ...
-
bioRxiv - Biochemistry 2023Quote: ... 4 °C (Fixed angle Ti90 Rotor, Optima XE90, Beckman Coulter). The supernatant was loaded onto a 70 ml Q-sepharose column (XK 26/20 ...
-
bioRxiv - Biophysics 2024Quote: ... 4 °C for 45 min in an ultracentrifuge (Beckman Coulter). The top fraction containing liposomes and the attached motors was harvested after the flotation assay and motor concentration was measured by GFP fluorescence.
-
bioRxiv - Molecular Biology 2022Quote: ... 6 mM β-mercaptoethanol) and spun at 43,000 rpm (214,000 × g) in a Type 45Ti rotor (Beckman) for 19 hours at 4°C ...
-
bioRxiv - Genomics 2020Quote: ... by ultracentrifugation at 4°C overnight (33500 rpm, Beckman, 70Ti rotor). The ribosome pellet was dissolved in 300 μL resuspension buffer (20 mM Tris-HCl pH 8.0 ...
-
bioRxiv - Neuroscience 2020Quote: ... for 60 min at 4 °C on ultracentrifuge (Beckman L7-65) and rotor (Beckman SW41-Ti) ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (TLA-55 rotor, Optima MAX-XP benchtop ultracentrifuge, Beckman). The supernatant was carefully aspirated and discarded ...
-
bioRxiv - Molecular Biology 2022Quote: ... 4 °C for 3 h (SW40 Ti rotor, Beckman-Coulter, Germany), the supernatant was discarded ...
-
bioRxiv - Microbiology 2020Quote: ... and then analyzed with a Multisizer 4 Coulter cytometer (Beckman-Coulter) as described previously (6).
-
bioRxiv - Cell Biology 2020Quote: ... After clarification (16,000 rpm, Beckman JA 25.5, 30 min, 4°C), lysate was incubated with Ni-NTA resin (Qiagen ...
-
bioRxiv - Cell Biology 2020Quote: ... After clarification (14,000 rpm, Beckman JA 25.5, 30 min, 4°C), lysate was incubated with Ni-NTA resin (Qiagen ...
-
bioRxiv - Biochemistry 2021Quote: ... 4°C for 30 min (Beckman Coulter, Avanti J-26 XP). Supernatant was loaded onto a His-Trap column using an ÄKTA protein purification system (GE Healthcare Life Sciences) ...
-
bioRxiv - Cancer Biology 2024Quote: ... Cells were acquired on a 4 laser CytoFlex S (Beckman Coulter) and analyzed using FlowJo software (V10.8.0).
-
bioRxiv - Microbiology 2023Quote: ... Volumes of single cells were measured using Multisizer 4 Instrument (Beckman Coulter ...
-
bioRxiv - Immunology 2023Quote: ... AlexaFluor 700 anti-human CD38 (clone LS198-4-3, Beckman Coulter), APC-Cy7 anti-human CD19 (clone SJ25C1 ...
-
bioRxiv - Biochemistry 2023Quote: ... size and volume was quantified with a Multisizer 4 (Beckman Coulter). To start N deprivation ...
-
bioRxiv - Genetics 2022Quote: ... 4°C using Optima L-90K Ultracentrifuge (SW32Tirotor; Beckman, Brea, CA), then viral particles were resuspended with normal growth medium and used for cell transduction.
-
bioRxiv - Immunology 2024Quote: ... Stained samples were analyzed on a 4 laser CytoFlex by Beckman Coulter using an automated plate reader ...
-
bioRxiv - Biochemistry 2024Quote: ... at 4 °C in an Avanti J26 super centrifuge (Beckman Coulter). The supernatant containing soluble His-SUMO-GLT25D1/COLGALT1 protein was filtered through a MiniSart GF 0.8 μm filter (Sartorius) ...
-
bioRxiv - Bioengineering 2024Quote: ... for 2 hrs at 4°C in polypropylene tubes (Beckman Coulter). Concentrated Cas9-EDVs were resuspended in Opti-MEM (Gibco ...
-
bioRxiv - Microbiology 2020Quote: ... filtered through 45 μm-pore size filters and concentrated onto a 20% sucrose cushion by ultracentrifugation (24,000 rpm, 2h, 6°C) using a SW32 rotor (Beckman). HIV-1-based lentiviral particles were produced by co-transfecting 293T cells with packaging (psPAX2) ...
-
bioRxiv - Genomics 2020Quote: ... eluted in 6 μl TE and size-selected using a 0.9X volume of Ampure XP Beads (Beckman Coulter A63882) to remove excess oligos.
-
bioRxiv - Neuroscience 2021Quote: ... The gradient was centrifuged at 50,000xg for 21min at 4°C (Beckman Coulter Optima MAX XP ultracentrifuge with a TL-55 rotor) ...
-
bioRxiv - Biochemistry 2021Quote: ... 4°C for 30 min using a JLA 9.1000 centrifuge rotor (Beckman). E ...
-
bioRxiv - Biochemistry 2020Quote: ... At OD600 1.2 the cells were pelleted at 4 °C (TLA10.500 (Beckman), 15 min at 5,000-8,000 rcf) ...
-
bioRxiv - Immunology 2021Quote: ... Samples in Figure 4 were collected with a CytoFlex cytometer (Beckman Coulter). Collected cells were rinsed twice with PBS and stained with Zombie-UV viability dye (BioLegend) ...
-
bioRxiv - Neuroscience 2023Quote: ... 4°C for 30 minutes in an OptimaTM MAX Ultracentrifuge (Beckman, Germany). Supernatant was collected and stored at -80°C ...
-
bioRxiv - Immunology 2023Quote: ... After centrifugation at 100,000xg for 16 hat 4°C (Beckman Ti50.2 rotor), the density of each fraction was measured ...
-
bioRxiv - Cell Biology 2023Quote: ... for 20 hours at 4 °C in an ultracentrifuge (LE-80K, Beckman). The centrifuged medium was diluted with serum-free Opti-MEM supplemented with penicillin/streptomycin to a final concentration of 10% BGS and filtered using the Stericup-VP Sterile Vacuum Filtration System with a 0.1 µM PES filter (Merck) ...
-
bioRxiv - Cell Biology 2024Quote: Cell volumes were measured using a Coulter counter (Multisizer 4, Beckman Coulter), which is based on the principle that a cell traversing an orifice filled with electrolyte will produce an impedance change proportional to the volume of the cell due to displacement of electrolyte ...
-
bioRxiv - Biochemistry 2022Quote: ... 4°C for 30 min using a JLA-9.1000 centrifuge rotor (Beckman). The pellet was resuspended in 500 mL hypotonic lysis buffer containing 10 mM Tris-HCl pH 7.8 ...
-
bioRxiv - Biochemistry 2022Quote: ... 4°C for 15 min using a JLA-9.1000 centrifuge rotor (Beckman). The pellet was resuspended in 70 mL buffer containing 50 mM Tris-HCl ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... Final ultracentrifugation step at 100,000g/1hour/4°C (Beckman AirFuge CLS Ultracentrifuge) resulted in pellets which were resuspended in the same buffer (66) ...
-
bioRxiv - Cancer Biology 2023Quote: ... Cell count was acquired using a Multisizer 4 Coulter Counter (Beckman-Coulter) using standard protocols and a threshold of 12 to 30 μm.
-
bioRxiv - Cell Biology 2023Quote: ... Gradients were centrifuged at 200,000xg for 16 h at 4°C (Beckman–Coulter Optima™ MAX–E centrifuge ...
-
bioRxiv - Cell Biology 2023Quote: ... EVs were pelleted at 200,000xg for 60 min at 4°C (Beckman–Coulter Optima™ L–90K or Optima™ XPN–80 centrifuge ...
-
bioRxiv - Neuroscience 2024Quote: ... and spun at 4°C in a fixed vertical rotor (VTi50, Beckman) at 242,000 g for 47 min to achieve subcellular fractionation.
-
bioRxiv - Developmental Biology 2022Quote: ... Supernatant was then filtered using 0.22 µm filter unit and divided into 6 Ultra-Clear tubs (Beckman Coulter – Ref.344058). Tubes were ultra-centrifuged at 31000 G for 1h30 at 4°C ...
-
bioRxiv - Biochemistry 2024Quote: ... The indicated cell lines were seeded into 6 well plates and then trypsinized and cell number counted using a Z Coulter Counter (Beckman). Approximately 200 cells were seeded into 60 mm dishes and exposed 25 ...
-
bioRxiv - Plant Biology 2024Quote: ... The mixture was then centrifuged for 20 min at 9,700 g at 6°C using an Avanti J-E centrifuge and a JLA-16.250 rotor (Beckman Coulter, USA). The supernatant was separated and centrifuged for 2.5 h at 200,000 g at 6°C using an Optima XPN-90 ultracentrifuge and a Type 45 Ti rotor (Beckman Coulter ...
-
bioRxiv - Plant Biology 2024Quote: ... The suspension was then centrifuged for 20 min at 9,700 g at 6°C using an Avanti J-E centrifuge and a JLA-16.250 rotor (Beckman Coulter, USA). The supernatant was separated and centrifuged for 3 h at 200,000 g at 6°C using an Optima XPN-90 ultracentrifuge with a Type 45 Ti rotor (Beckman Coulter ...
-
bioRxiv - Microbiology 2022Quote: ... for 90 min or for the 6-well format at 44,000 rpm using a Beckman TLA-55 fixed angle-rotor (Beckman Coulter) for 45 min at 4°C ...
-
bioRxiv - Molecular Biology 2024Quote: ... The densest solution (3.6 ml) was first placed in a 38.5 ml ultracentrifuge tube (Open-Top Thinwall Polypropylene Tube, 25 × 89mm, Beckman Coulter) and frozen for 15 minutes at -80°C ...
-
bioRxiv - Bioengineering 2024Quote: ... the caveosphere mixture was layered onto a 20%–80% discontinuous sucrose gradient and subjected to velocity gradient centrifugation (120,000g, 6 hours, SW 41 Ti Swinging-Bucket Rotor, Beckman Coulter). Twenty fractions were collected from the bottom of the tube ...
-
bioRxiv - Biochemistry 2020Quote: ... cells were harvested by centrifugation (6000 rpm, JA10, 20 min, 4 °C, Beckman). The pellet was re-suspended in 15-20 ml of 50 mM NaH2PO4 ...
-
bioRxiv - Cell Biology 2020Quote: ... 4 °C for 38 min with MLA-50 rotor (Beckman Coulter, California, USA). The top layer and the subsequent 10 fractions (fraction 1-10 ...
-
bioRxiv - Biochemistry 2020Quote: ... centrifuged at 90,000 rpm for 10 min at 4°C (TLA120.1 Beckman Coulter), and then polymerized by incubation at 37°C for 30 mins ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were collected after 4 days and counted by Z2 Coulter Counter (Beckman). For cell proliferation assays with fold change in cell number ...
-
bioRxiv - Microbiology 2021Quote: ... centrifuged at 42,000 rpm for 45 minutes at 4 °C (45Ti rotor; Beckman), and the resulting total membrane fraction was homogenized in TBS buffer containing 1.5% Lauryl-dimethylamine oxide (LDAO ...