Labshake search
Citations for Beckman :
451 - 500 of 1639 citations for 1 Methoxy 4 1 methylbutyl benzene since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2023Quote: ... After centrifugation at 100,000xg for 16 hat 4°C (Beckman Ti50.2 rotor), the density of each fraction was measured ...
-
bioRxiv - Cell Biology 2023Quote: ... for 20 hours at 4 °C in an ultracentrifuge (LE-80K, Beckman). The centrifuged medium was diluted with serum-free Opti-MEM supplemented with penicillin/streptomycin to a final concentration of 10% BGS and filtered using the Stericup-VP Sterile Vacuum Filtration System with a 0.1 µM PES filter (Merck) ...
-
bioRxiv - Cell Biology 2024Quote: Cell volumes were measured using a Coulter counter (Multisizer 4, Beckman Coulter), which is based on the principle that a cell traversing an orifice filled with electrolyte will produce an impedance change proportional to the volume of the cell due to displacement of electrolyte ...
-
bioRxiv - Biochemistry 2022Quote: ... 4°C for 30 min using a JLA-9.1000 centrifuge rotor (Beckman). The pellet was resuspended in 500 mL hypotonic lysis buffer containing 10 mM Tris-HCl pH 7.8 ...
-
bioRxiv - Biochemistry 2022Quote: ... 4°C for 15 min using a JLA-9.1000 centrifuge rotor (Beckman). The pellet was resuspended in 70 mL buffer containing 50 mM Tris-HCl ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... Final ultracentrifugation step at 100,000g/1hour/4°C (Beckman AirFuge CLS Ultracentrifuge) resulted in pellets which were resuspended in the same buffer (66) ...
-
bioRxiv - Cancer Biology 2023Quote: ... Cell count was acquired using a Multisizer 4 Coulter Counter (Beckman-Coulter) using standard protocols and a threshold of 12 to 30 μm.
-
bioRxiv - Cell Biology 2023Quote: ... Gradients were centrifuged at 200,000xg for 16 h at 4°C (Beckman–Coulter Optima™ MAX–E centrifuge ...
-
bioRxiv - Cell Biology 2023Quote: ... EVs were pelleted at 200,000xg for 60 min at 4°C (Beckman–Coulter Optima™ L–90K or Optima™ XPN–80 centrifuge ...
-
bioRxiv - Neuroscience 2024Quote: ... and spun at 4°C in a fixed vertical rotor (VTi50, Beckman) at 242,000 g for 47 min to achieve subcellular fractionation.
-
bioRxiv - Immunology 2021Quote: ... The lysate was centrifuged at 42,000 RPM for 1 h (45 Ti fixed-angle rotor, Beckman), and the supernatant was used for affinity chromatography with MBP beads by gravity flow ...
-
bioRxiv - Immunology 2021Quote: ... The lysate was centrifuged at 42,000 RPM for 1 h (45 Ti fixed-angle rotor, Beckman), and the supernatant was used for affinity chromatography with anti-FLAG M2 affinity gel (Sigma ...
-
bioRxiv - Evolutionary Biology 2021Quote: ... and diluted 1:210 into 8 new wells using a Biomek-FX pipetting robot (Beckman-Coulter). This split-pool strategy was designed to mimic the evolution conditions while maintaining sufficient diversity for bulk fitness measurements ...
-
bioRxiv - Genomics 2020Quote: ... amplicons were purified using 1 x Agencourt AMPure XP beads (Beckman Coulter Life Sciences, United States), eluted in 20 μl of 10 mM Tris (pH 8.5) ...
-
bioRxiv - Developmental Biology 2020Quote: ... and tagmented DNA was purified with a 1.5:1 ratio of AMPure XP beads (Beckman, A63880) following the manufacturer’s instructions ...
-
bioRxiv - Biophysics 2020Quote: ... and 0.5 mM EDTA) supplemented with 1 mM DTT at 125,000 × g (SW Ti40 rotor, Beckman) for 16 hours at 4 °C ...
-
bioRxiv - Cell Biology 2020Quote: ... Lysate was clarified by centrifugation at 55,000 g for 1 h in 25.50 rotor (Beckman Coulter). Clarified supernatant was loaded on 1.5 mL of amylose resin (NEB ...
-
bioRxiv - Cell Biology 2020Quote: ... This product was then purified and concentrated to >1 μM using magnetic SPRI beads (Beckman Coulter). 2.2 μl Cas9 buffer (580 mM KCl ...
-
bioRxiv - Microbiology 2020Quote: ... DNA was purified twice using 1× volume of AMPure XP beads (Beckman Coulter, Cat. No. A63882) with slight modifications to the manufacturer’s protocol ...
-
bioRxiv - Biochemistry 2021Quote: ... using 1-10 ng DNA and libraries were size selected with AMPure XP beads (Beckman Coulter). Illumina 50 bp single-end read sequencing was performed on a NextSeq 500 or NovaSeq 6000 ...
-
bioRxiv - Bioengineering 2021Quote: ... cells were washed with 1% BSA in DPBS and analyzed using CytoFLEX LX (Beckman Coulter, USA). Isotype controls served for negative gating.
-
bioRxiv - Molecular Biology 2021Quote: ... cells were permeabilized and intracellular staining of RD1-conjugated antiHIV-1 p24 (Beckman Coulter, Brea, CA). Flow cytometry was performed using BD Fortessa II instrument (BD Biosciences ...
-
bioRxiv - Physiology 2022Quote: Tritium from [1-3H]-glucose enrichment was detected by liquid scintillation spectrometry (Beckman Coulter LS 6500).
-
bioRxiv - Microbiology 2021Quote: ... 1 mM EDTA) and cesium chloride (7.163 M) in 3.3 ml polyallomer centrifuge tubes (Beckman Coulter) to a final density of 1.700 g ml-1 ...
-
bioRxiv - Microbiology 2022Quote: ... Cell debris was removed by centrifugation (25,000 rpm for 1 hour, JA-25.50 rotor (Beckman Coulter)) ...
-
bioRxiv - Synthetic Biology 2020Quote: ... Samples were then purified using 1 volume of Agencourt AMPure XP beads (Beckman Coulter, cat. A63880) and used as input for library preparation using NEBNext Ultra II DNA Library Prep Kit (New England Biolabs ...
-
bioRxiv - Immunology 2020Quote: ... were incubated with 1-2 million 1D8 cells following standard FACS protocol and analyzed by Beckman.
-
bioRxiv - Immunology 2021Quote: ... VLPs were concentrated using ultracentrifuge (TLA100.3 rotor, Beckman; at 72,000 rpm for 1 hour, +5°C) or by ultrafiltration using Amicon Ultra 15 (100 kDa ...
-
bioRxiv - Molecular Biology 2023Quote: ... A second cleanup of the libraries was performed using 1 volume of AMPure XB beads (Beckman). Libraries were eluted in 20 µl of nuclease-free H2O (Ambion) ...
-
bioRxiv - Immunology 2023Quote: ... manual gating analysis (Supplementary figure 1) was performed with Kaluza V2.1 software (Beckman coulter, IN, USA).
-
bioRxiv - Biochemistry 2024Quote: Bacteria were collected in 1 L buckets by centrifugation at 5000 rpm (JLA8.1 rotor, Beckman-Coulter) for 20 min ...
-
bioRxiv - Biochemistry 2024Quote: ... Bacteria were collected in 1-L buckets by centrifugation at 5000 rpm (JLA8.1 rotor, Beckman-Coulter) for 20 minutes ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... 18 ◦C for 1 h 45 min in a 50.2Ti rotor (Beckman-Coulter, Brea, CA, USA). After ultracentrifugation ...
-
bioRxiv - Microbiology 2023Quote: ... Diluted samples (1 in 100 in PBS) were analysed on a Cytoflex flow cytometer (Beckman Coulter), to count GFP-PA01 cells (ex ...
-
bioRxiv - Molecular Biology 2022Quote: ... for 1 additional hour at 55°C and purified using 2x AMPure XP beads (Beckman Coulter). The generated libraries were amplified using the KAPA HiFi Hotstart Ready Mix and Nextera Index Kit 1 (i7 ...
-
bioRxiv - Microbiology 2023Quote: ... Three 1:2 serial dilutions were done suing a Biomek i7 liquid handler (Beckman Coulter, USA), in order to obtain the four working concentrations ...
-
bioRxiv - Cell Biology 2022Quote: ... The PCR primers were removed with 1x 0.9:1 SPRI beads (Beckman Coulter, Cat no. A63880) according to manufacturer’s instructions and samples eluted in 20μl ...
-
bioRxiv - Immunology 2024Quote: ... Cells were then stained with an HIV-1 Gag-p24 specific antibody (KC57-PE, Beckman Coulter). Sample acquisition and analysis were performed using a BD LSRFortessa and FlowJo v10.8 Software ...
-
bioRxiv - Molecular Biology 2024Quote: ... 1× Protease Inhibitor) were generated in 14 x 89 mm Ultra-Clear Centrifuge Tubes (Beckman Coulter), using a 107 Gradient Master (BioComp) ...
-
bioRxiv - Cell Biology 2024Quote: ... LDs were isolated by collecting the 1 ml top fraction with a tube-slicer (Beckman Coulter). The remaining 1 ml gradient fractions were collected sequentially with a pipette from top to bottom ...
-
bioRxiv - Cell Biology 2021Quote: ... Beads were centrifugated at 1000 g for 5 min at 4°C (Beckman Coulter Microfuge 22R ...
-
bioRxiv - Biochemistry 2020Quote: ... cells were harvested by centrifugation (6000 rpm, JA10, 20 min, 4 °C, Beckman). The pellet was re-suspended in 15-20 ml of 50 mM NaH2PO4 ...
-
bioRxiv - Cell Biology 2020Quote: ... 4 °C for 38 min with MLA-50 rotor (Beckman Coulter, California, USA). The top layer and the subsequent 10 fractions (fraction 1-10 ...
-
bioRxiv - Biochemistry 2020Quote: ... centrifuged at 90,000 rpm for 10 min at 4°C (TLA120.1 Beckman Coulter), and then polymerized by incubation at 37°C for 30 mins ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were collected after 4 days and counted by Z2 Coulter Counter (Beckman). For cell proliferation assays with fold change in cell number ...
-
bioRxiv - Microbiology 2021Quote: ... centrifuged at 42,000 rpm for 45 minutes at 4 °C (45Ti rotor; Beckman), and the resulting total membrane fraction was homogenized in TBS buffer containing 1.5% Lauryl-dimethylamine oxide (LDAO ...
-
bioRxiv - Microbiology 2021Quote: ... and were analysed with a Multisizer 4 Coulter Counter (Beckman Coulter, Brea, USA) equipped with a 30 nm aperture tube ...
-
bioRxiv - Systems Biology 2023Quote: ... the supernatant was then divided into 4 x 1.5 mL Ultracentrifuge Tubes (Beckman) and processed for differential ultracentrifugation step with an Optima TLX-BenchTop Ultracentrifuge (Beckman ...
-
bioRxiv - Cell Biology 2023Quote: ... Flow cytometric analyses were performed on a BD Fortessa 4-Laser Analyzer (Beckman Coulter ...
-
bioRxiv - Biochemistry 2024Quote: ... at 4°C for 128 min using a SW 40Ti rotor (Beckman Coulter). After centrifugation ...