Labshake search
Citations for Ted Pella :
1 - 50 of 64 citations for T Cell Surface Glycoprotein CD3 Gamma Chain CD3G Antibody Biotin since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Bioengineering 2023Quote: Samples were prepared by covering a cleaved mica surface (Ted Pella) with 20 µL of 0.01 % poly-L-lysine solution (Sigma-Aldrich) ...
-
bioRxiv - Cell Biology 2020Quote: Carbon Paint (Ted Pella, DAG-T-502)
-
bioRxiv - Biophysics 2020Quote: ... solution was pipetted onto a freshly cleaved mica surface (Ted Pella, Redding, CA) and incubated for 20 minutes ...
-
bioRxiv - Microbiology 2021Quote: ... The DNA or DNA/Lsr2 was then deposited onto freshly cleaved mica surfaces (Ted Pella, Inc.) and rinsed with 1 mL nuclease-free water ...
-
bioRxiv - Molecular Biology 2023Quote: ... 100mM NaCl) shortly after being adsorbed on freshly cleaved muscovite surface (mica grade v1, Ted Pella) glued on a glass slide ...
-
bioRxiv - Neuroscience 2020Quote: ... The specimens were then centrifuged onto the surface of 5 x 5 mm2 silicon chips (Ted Pella), fixed ...
-
bioRxiv - Cell Biology 2020Quote: ... A 20-25 nm-thick conductive platinum coating was applied to the sample surface with a sputter coater (Ted Pella, Inc.), and the sample was then imaged in a Crossbeam 550 FIB-SEM workstation (Carl Zeiss Microscopy ...
-
bioRxiv - Biophysics 2022Quote: ... to make the surface of the support grids for electron microscopy covered with a film of amorphous carbon (01843-F / 01844-F, Ted Pella) hydrophilic ...
-
bioRxiv - Biophysics 2023Quote: ... cells were plated onto the bottom dish surface and the cavity was covered at the top with a 22×22 cm cover glass (Ted Pella).
-
bioRxiv - Bioengineering 2022Quote: ... t = 90 s) through a 1 mm thick quartz microscope slide (26011, Ted Pella) using aluminum foil to mask the other side from UV exposure.
-
bioRxiv - Genomics 2019Quote: ... and mounted with the retina apical surface facing an acid-washed cover glass coated with Bio-Bond tissue adhesive (Ted Pella Inc.). Each cover glass contained 9 wells and several retinas were mounted per well ...
-
bioRxiv - Immunology 2024Quote: ... Individual TEM grids were prepared by applying 8 µL of protein sample onto the carbon surface of 300 mesh lacey formvar/carbon TEM grids (Ted Pella Inc.) for 90 seconds ...
-
bioRxiv - Biochemistry 2022Quote: ... 100 mM glycine to glow-discharged C-flat CF-2/2 C-T-grids (TED PELLA).
-
bioRxiv - Cell Biology 2021Quote: ... Epon blocks were glued onto the SEM sample mounting aluminum and platinum en bloc coating on the sample surface was carried out with the sputter coater (Ted Pella, Inc., Redding, California). Sample were FIBSEM imaged in a Crossbeam 550 FIBSEM workstation operating under SmartSEM (Carl Zeiss Microscopy GmbH ...
-
bioRxiv - Cell Biology 2022Quote: ... platinum en bloc coating (20-25 nm thick) of the sample surface was carried out with the sputter coater (Ted Pella, Inc., Redding, California). Sample were FIB-SEM imaged in a Crossbeam 550 FIBSEM workstation operating under SmartSEM (Carl Zeiss Microscopy GmbH ...
-
bioRxiv - Cell Biology 2022Quote: Epon block was glued onto the SEM sample mounting aluminum stub and platinum en bloc coating on the sample surface was carried out with the sputter coater (Ted Pella, Inc., Redding, California). The cell of interest was relocated under SEM imaging based on pre-recorded coordinates and FIB-SEM imaged in a Crossbeam 550 FIBSEM workstation operating under SmartSEM (Carl Zeiss Microscopy GmbH ...
-
bioRxiv - Biochemistry 2023Quote: ... a few μl of these suspensions were poured on the surface of a 5×7 mm silicon chip (Ted Pella Inc, Redding, CA, USA). After evaporation of the solvent ...
-
bioRxiv - Microbiology 2019Quote: ... the antibody-labelled cells were adhered to coverslips treated with 0.1% poly-L-lysine (Ted Pella, Redding, CA) and imaged on an Olympus IX81 inverted microscope ...
-
bioRxiv - Plant Biology 2022Quote: ... and gold particles (6 nm, 10 nm) conjugated secondary antibodies (Ted Pella). Sections were post-stained and examined with a Hitachi 7400 TEM (Hitachi-High Technologies ...
-
bioRxiv - Neuroscience 2020Quote: ... Then incubated with 10 nm immunogold-conjugated secondary antibodies (Ted Pella, Redding, CA) in 1% NGS in TBST with 0.5% polyethylene glycol (20,000 MW) ...
-
bioRxiv - Biochemistry 2021Quote: ... incubated with 1:20 10 nm gold-anti-mouse antibody (Ted Pella 15751), washed ...
-
bioRxiv - Neuroscience 2023Quote: ... and incubated in secondary antibodies (1:10 10 nm gold-conjugated IgG, TED Pella, 15796) for 1 h at room temperature and rinsed with PBST followed by water ...
-
bioRxiv - Cell Biology 2022Quote: Cells grown on ACLAR film (Ted Pella) for 24 hours until 80-90% confluency ...
-
bioRxiv - Developmental Biology 2022Quote: ... cells were fixed with formaldehyde (Ted Pella) to crosslink chromatin contacts ...
-
bioRxiv - Cell Biology 2021Quote: Cells were fixed with 4% paraformaldehyde (Ted Pella) in 100 mM sucrose for 20 min ...
-
bioRxiv - Plant Biology 2020Quote: ... resin infiltration and antibodies washing steps were all microwave (MW) assisted using a PELCO BioWave Pro (Ted Pella). Fixation was realized at 150W ...
-
bioRxiv - Cell Biology 2022Quote: ... cells were cultured in glass-bottom dishes (Ted Pella). Three single sections were imaged before photobleaching ...
-
bioRxiv - Biochemistry 2020Quote: ... Flow cells were constructed using glass slides (Ted Pella 260600), glass coverslips (Fisher 12-541A) ...
-
bioRxiv - Systems Biology 2020Quote: ... cells were fixed with 2% glutaraldehyde (18426, Ted Pella Incorporated) in 0.1M sodium cacodylate buffer ...
-
bioRxiv - Systems Biology 2020Quote: ... cells were fixed with 2% glutaraldehyde (18426, Ted Pella Incorporated) in 0.1M sodium cacodylate buffer ...
-
bioRxiv - Neuroscience 2023Quote: ... then incubated in a secondary goat anti-rabbit antibody conjugated to 10-nm colloidal gold (Ted Pella, diluted 1:100) for 30 min at room temperature ...
-
bioRxiv - Systems Biology 2020Quote: ... The cells were fixed with 2% glutaraldehyde (18426, Ted Pella Incorporated) in 0.1M sodium cacodylate buffer ...
-
bioRxiv - Microbiology 2023Quote: ... Cells were embedded into an Eponate 12 Resin (Ted Pella inc) and left for two days at 60°C to achieve complete polymerization ...
-
bioRxiv - Immunology 2021Quote: ... Grids were rinsed (4x 10’) with PBS then labeled for 2 hrs with 10 nm gold conjugated goat anti-mouse secondary antibody (Ted Pella, Inc.). Grids were again rinsed (4x 10’ ...
-
bioRxiv - Genomics 2023Quote: ... cells were cross-linked with 1% formaldehyde (Ted Pella Inc., Redding, CA) for 10 min at room temperature ...
-
bioRxiv - Genomics 2020Quote: ... The grids were rinsed and incubated with a rabbit secondary antibody conjugated to 15 nm gold at a 1:20 dilution in blocking buffer (Ted Pella, Redding, CA). Grids were post stained with 2% uranyl acetate and Reynolds lead citrate and imaged in a Tecnai T12 microscope ...
-
bioRxiv - Microbiology 2019Quote: ... cells were stained with 1% aqueous uranyl acetate (Ted Pella Inc., Redding, CA) for 1 h ...
-
bioRxiv - Cell Biology 2019Quote: ... Cells were mounted in Citifluor mounting media (Ted Pella Inc., Redding, CA, USA).
-
bioRxiv - Molecular Biology 2019Quote: ... cells (4 × 106) were cross-linked with 1% formaldehyde (Ted Pella Inc., Redding, CA) for 10 minutes at room temperature ...
-
bioRxiv - Genetics 2020Quote: Cells were replated onto matrigel-coated 1cm x 5mm Aclar (Ted Pella, #10501-10). After 5 days of recovery ...
-
bioRxiv - Microbiology 2019Quote: ... Cells were pelleted and loaded onto copper membrane carriers (1mm x 0.5 mm; Ted Pella Inc.) and cryofixed using the EM PACT2 high pressure freezer (Leica) ...
-
bioRxiv - Microbiology 2023Quote: ... Cells were slowly returned to room temperature for embedding in Araldite 502 resin (Ted Pella, Inc.). These sections were cut at 70 nm thickness and secondary stained with lead acetate to improve contrast All thin section imaging was performed on a Tecnai TF-20 (FEI ...
-
bioRxiv - Microbiology 2022Quote: ... Cells were dehydrated through a graded ethanol series and embedded in Epon 12 resin (Ted Pella: 18010). 70nm thin sections were cut using an Ultracut UC7 ultramicrotome (Leica Mikrosysteme ...
-
bioRxiv - Cell Biology 2020Quote: ... cells collected 16 h after meiotic induction were fixed for 15 min in 4% paraformaldehyde (Ted Pella) with 100 mM sucrose ...
-
bioRxiv - Cell Biology 2019Quote: Cell pellets (2-3 μl) were loaded onto copper membrane carriers (1mm x 0.5 mm; Ted Pella Inc.) and cryofixed using the EM PACT2 high pressure freezer (Leica) ...
-
bioRxiv - Microbiology 2020Quote: ... The cell suspension was then mixed with 10‐nm colloidal gold beads (Ted Pella, Inc., Redding, CA, USA) pre-coated with 5% (w/v ...
-
bioRxiv - Microbiology 2020Quote: ... The cells were then placed onto 18 mm coverslips pre-treated with poly-L-lysine (Ted Pella Inc.), fixed with 4% and 0.2% paraformaldehyde and gluteraldehyde in PBS ...
-
bioRxiv - Microbiology 2022Quote: ... cells were grown to an OD600 of 0.3–0.8 and fixed in 2.5% formaldehyde (Ted Pella, Redding, CA) for 15 min ...
-
bioRxiv - Genomics 2024Quote: ... murina and A549-LET1 cells described above were grown on Thermanox™ coverslips (Ted Pella, Redding, CA, USA), harvested at day 7 ...
-
bioRxiv - Cell Biology 2019Quote: ... Cells were washed three times in 0.1% BSA-PBS and mounted with 6.5 µL Citifluor mounting media (Ted Pella). Samples were sealed using clear nail polish ...