Labshake search
Citations for Ted Pella :
1 - 50 of 67 citations for Mouse T Cell Surface Glycoprotein CD8 Beta Chain CD8B ELISA Kit since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Bioengineering 2023Quote: Samples were prepared by covering a cleaved mica surface (Ted Pella) with 20 µL of 0.01 % poly-L-lysine solution (Sigma-Aldrich) ...
-
bioRxiv - Cell Biology 2020Quote: Carbon Paint (Ted Pella, DAG-T-502)
-
bioRxiv - Biophysics 2020Quote: ... solution was pipetted onto a freshly cleaved mica surface (Ted Pella, Redding, CA) and incubated for 20 minutes ...
-
bioRxiv - Microbiology 2021Quote: ... The DNA or DNA/Lsr2 was then deposited onto freshly cleaved mica surfaces (Ted Pella, Inc.) and rinsed with 1 mL nuclease-free water ...
-
bioRxiv - Molecular Biology 2023Quote: ... 100mM NaCl) shortly after being adsorbed on freshly cleaved muscovite surface (mica grade v1, Ted Pella) glued on a glass slide ...
-
bioRxiv - Neuroscience 2020Quote: ... The specimens were then centrifuged onto the surface of 5 x 5 mm2 silicon chips (Ted Pella), fixed ...
-
bioRxiv - Cell Biology 2020Quote: ... A 20-25 nm-thick conductive platinum coating was applied to the sample surface with a sputter coater (Ted Pella, Inc.), and the sample was then imaged in a Crossbeam 550 FIB-SEM workstation (Carl Zeiss Microscopy ...
-
bioRxiv - Biophysics 2022Quote: ... to make the surface of the support grids for electron microscopy covered with a film of amorphous carbon (01843-F / 01844-F, Ted Pella) hydrophilic ...
-
bioRxiv - Biophysics 2023Quote: ... cells were plated onto the bottom dish surface and the cavity was covered at the top with a 22×22 cm cover glass (Ted Pella).
-
bioRxiv - Bioengineering 2022Quote: ... t = 90 s) through a 1 mm thick quartz microscope slide (26011, Ted Pella) using aluminum foil to mask the other side from UV exposure.
-
bioRxiv - Genomics 2019Quote: ... and mounted with the retina apical surface facing an acid-washed cover glass coated with Bio-Bond tissue adhesive (Ted Pella Inc.). Each cover glass contained 9 wells and several retinas were mounted per well ...
-
bioRxiv - Immunology 2024Quote: ... Individual TEM grids were prepared by applying 8 µL of protein sample onto the carbon surface of 300 mesh lacey formvar/carbon TEM grids (Ted Pella Inc.) for 90 seconds ...
-
bioRxiv - Biochemistry 2022Quote: ... 100 mM glycine to glow-discharged C-flat CF-2/2 C-T-grids (TED PELLA).
-
bioRxiv - Cell Biology 2021Quote: ... Epon blocks were glued onto the SEM sample mounting aluminum and platinum en bloc coating on the sample surface was carried out with the sputter coater (Ted Pella, Inc., Redding, California). Sample were FIBSEM imaged in a Crossbeam 550 FIBSEM workstation operating under SmartSEM (Carl Zeiss Microscopy GmbH ...
-
bioRxiv - Cell Biology 2022Quote: ... platinum en bloc coating (20-25 nm thick) of the sample surface was carried out with the sputter coater (Ted Pella, Inc., Redding, California). Sample were FIB-SEM imaged in a Crossbeam 550 FIBSEM workstation operating under SmartSEM (Carl Zeiss Microscopy GmbH ...
-
bioRxiv - Cell Biology 2022Quote: Epon block was glued onto the SEM sample mounting aluminum stub and platinum en bloc coating on the sample surface was carried out with the sputter coater (Ted Pella, Inc., Redding, California). The cell of interest was relocated under SEM imaging based on pre-recorded coordinates and FIB-SEM imaged in a Crossbeam 550 FIBSEM workstation operating under SmartSEM (Carl Zeiss Microscopy GmbH ...
-
bioRxiv - Biochemistry 2023Quote: ... a few μl of these suspensions were poured on the surface of a 5×7 mm silicon chip (Ted Pella Inc, Redding, CA, USA). After evaporation of the solvent ...
-
bioRxiv - Neuroscience 2020Quote: ... Mouse brain was placed on mouse brain matrix (Ted Pella, Inc Cat# 15050) and 1mm thick slices of the brain were obtained for the dissection of SNpc ...
-
bioRxiv - Biochemistry 2021Quote: ... incubated with 1:20 10 nm gold-anti-mouse antibody (Ted Pella 15751), washed ...
-
bioRxiv - Cell Biology 2023Quote: ... BDMA 0.8 ml) (Epon-Araldite kit, Ted Pella, 18028) and 30% ...
-
bioRxiv - Neuroscience 2021Quote: ... throughout the entire cerebellum of four week old C56/Bl6 mice (the pattern was also confirmed in one P21 mouse-data not shown) were rinsed of glycerol cryoprotectant three times for two minutes in a scientific microwave (Ted Pella) at 35 degrees and 150 watts (all following rinses were performed this way) ...
-
bioRxiv - Cell Biology 2022Quote: Cells grown on ACLAR film (Ted Pella) for 24 hours until 80-90% confluency ...
-
bioRxiv - Developmental Biology 2022Quote: ... cells were fixed with formaldehyde (Ted Pella) to crosslink chromatin contacts ...
-
bioRxiv - Pathology 2024Quote: ... fresh Spurr’s resin (low viscosity kit; Ted Pella, Redding, CA, USA) was prepared according to the manufacturer’s instructions for infiltration with acetone-resin (3:1 ...
-
bioRxiv - Immunology 2021Quote: ... Grids were rinsed (4x 10’) with PBS then labeled for 2 hrs with 10 nm gold conjugated goat anti-mouse secondary antibody (Ted Pella, Inc.). Grids were again rinsed (4x 10’ ...
-
bioRxiv - Neuroscience 2023Quote: ... and incubated in goat anti-mouse secondary Abs conjugated to 10 nm or 20 nm-diameter gold particles (Ted Pella, Redding CA). Grids were counterstained with 1% uranyl acetate ...
-
bioRxiv - Microbiology 2022Quote: ... in vitro grown differentiated polarized monolayers of human ileal enteroid samples as well as mouse intestinal biopsy samples were fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Ted Pella, Inc., Redding, CA) in 100 mM sodium cacodylate buffer ...
-
bioRxiv - Cell Biology 2021Quote: Cells were fixed with 4% paraformaldehyde (Ted Pella) in 100 mM sucrose for 20 min ...
-
bioRxiv - Neuroscience 2023Quote: ... the processed brain hemisphere was sliced through a metal cast brain matrix for adult mouse (coronal, 1 mm interval, #15003, Ted Pella Inc, CA, USA). These brain slices between Bregma -3.4 to 2.7 were mapped radiologically and histologically against using Allen Mouse Brain Atlas (53) ...
-
bioRxiv - Cell Biology 2022Quote: ... cells were cultured in glass-bottom dishes (Ted Pella). Three single sections were imaged before photobleaching ...
-
bioRxiv - Neuroscience 2021Quote: ... Using the solutions of the PELCO Eponate 12 kit with DMP-30 (Ted Pella), a medium hardness resin mix (without accelerator ...
-
bioRxiv - Biochemistry 2020Quote: ... Flow cells were constructed using glass slides (Ted Pella 260600), glass coverslips (Fisher 12-541A) ...
-
bioRxiv - Systems Biology 2020Quote: ... cells were fixed with 2% glutaraldehyde (18426, Ted Pella Incorporated) in 0.1M sodium cacodylate buffer ...
-
bioRxiv - Systems Biology 2020Quote: ... cells were fixed with 2% glutaraldehyde (18426, Ted Pella Incorporated) in 0.1M sodium cacodylate buffer ...
-
bioRxiv - Systems Biology 2020Quote: ... The cells were fixed with 2% glutaraldehyde (18426, Ted Pella Incorporated) in 0.1M sodium cacodylate buffer ...
-
bioRxiv - Microbiology 2023Quote: ... Cells were embedded into an Eponate 12 Resin (Ted Pella inc) and left for two days at 60°C to achieve complete polymerization ...
-
bioRxiv - Genomics 2023Quote: ... cells were cross-linked with 1% formaldehyde (Ted Pella Inc., Redding, CA) for 10 min at room temperature ...
-
bioRxiv - Microbiology 2019Quote: ... cells were stained with 1% aqueous uranyl acetate (Ted Pella Inc., Redding, CA) for 1 h ...
-
bioRxiv - Cell Biology 2019Quote: ... Cells were mounted in Citifluor mounting media (Ted Pella Inc., Redding, CA, USA).
-
bioRxiv - Molecular Biology 2019Quote: ... cells (4 × 106) were cross-linked with 1% formaldehyde (Ted Pella Inc., Redding, CA) for 10 minutes at room temperature ...
-
bioRxiv - Genetics 2020Quote: Cells were replated onto matrigel-coated 1cm x 5mm Aclar (Ted Pella, #10501-10). After 5 days of recovery ...
-
bioRxiv - Microbiology 2019Quote: ... Cells were pelleted and loaded onto copper membrane carriers (1mm x 0.5 mm; Ted Pella Inc.) and cryofixed using the EM PACT2 high pressure freezer (Leica) ...
-
bioRxiv - Microbiology 2023Quote: ... Cells were slowly returned to room temperature for embedding in Araldite 502 resin (Ted Pella, Inc.). These sections were cut at 70 nm thickness and secondary stained with lead acetate to improve contrast All thin section imaging was performed on a Tecnai TF-20 (FEI ...
-
bioRxiv - Microbiology 2022Quote: ... Cells were dehydrated through a graded ethanol series and embedded in Epon 12 resin (Ted Pella: 18010). 70nm thin sections were cut using an Ultracut UC7 ultramicrotome (Leica Mikrosysteme ...
-
bioRxiv - Cell Biology 2020Quote: ... cells collected 16 h after meiotic induction were fixed for 15 min in 4% paraformaldehyde (Ted Pella) with 100 mM sucrose ...
-
bioRxiv - Microbiology 2019Quote: ... the antibody-labelled cells were adhered to coverslips treated with 0.1% poly-L-lysine (Ted Pella, Redding, CA) and imaged on an Olympus IX81 inverted microscope ...
-
bioRxiv - Cell Biology 2019Quote: Cell pellets (2-3 μl) were loaded onto copper membrane carriers (1mm x 0.5 mm; Ted Pella Inc.) and cryofixed using the EM PACT2 high pressure freezer (Leica) ...
-
bioRxiv - Microbiology 2020Quote: ... The cell suspension was then mixed with 10‐nm colloidal gold beads (Ted Pella, Inc., Redding, CA, USA) pre-coated with 5% (w/v ...
-
bioRxiv - Microbiology 2020Quote: ... The cells were then placed onto 18 mm coverslips pre-treated with poly-L-lysine (Ted Pella Inc.), fixed with 4% and 0.2% paraformaldehyde and gluteraldehyde in PBS ...
-
bioRxiv - Microbiology 2022Quote: ... cells were grown to an OD600 of 0.3–0.8 and fixed in 2.5% formaldehyde (Ted Pella, Redding, CA) for 15 min ...