Labshake search
Citations for Ted Pella :
1 - 50 of 57 citations for LAG 3 Human HEK293 Fc since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Developmental Biology 2021Quote: ... glass slides (4’’ by 3’’; Ted Pella) and the feature-side of the PDMS slabs were thoroughly cleaned with tape to remove any dust particles ...
-
bioRxiv - Microbiology 2021Quote: ... using carbon tape (16084-3, TED PELLA, Redding, CA). To increase conduction ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 pyruvate) using vibratome (Vibratome 1000 plus, Ted Pella Inc., CA, USA). Slices were transferred and kept for 1 hour at room temperature in artificial cerebrospinal fluid (ACSF ...
-
bioRxiv - Cancer Biology 2022Quote: ... which were prepared by biopsy punch (3 mm in diameter, Ted Pella, Sweden). 20 μl of conditioned media was added into the loading chambers followed by incubation for 12 hours at 4 °C ...
-
bioRxiv - Developmental Biology 2019Quote: ... The samples were then fixed for 3 minutes using the Pelco Biowave (Ted Pella), followed by overnight fixation at 4°C ...
-
bioRxiv - Developmental Biology 2023Quote: ... 3×10 minutes and dehydrated using a Pelco BioWave Pro Microwave (Ted Pella, Inc.) as follows ...
-
bioRxiv - Biophysics 2023Quote: ... a 3 µL drop was applied to carbon coated 400 mesh copper grids (Ted Pella) that were glow discharged at 15 mA for 1 min ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 mM calcium chloride in 0.1 M sodium cacodylate buffer pH 7.4 (Ted Pella Incorporated, 18851) for 5 minutes at 37 °C and then on ice for 1 hour ...
-
bioRxiv - Synthetic Biology 2021Quote: ... PDMS slab is punched with a diameter of 3 mm puncher (Harris Uni-Core, Ted Pella).
-
bioRxiv - Microbiology 2022Quote: ... 3 µl of each reaction were spotted onto EMS CF300-CU grids (Ted Pella, Redding, CA) for 2 min ...
-
bioRxiv - Molecular Biology 2022Quote: ... a 3 μL sample was spotted onto a freshly glow-discharged carbon-coated grid (Ted Pella), incubated for 2 min ...
-
bioRxiv - Biochemistry 2024Quote: ... 3 µl of sample was pipetted onto the grid and Grade 595 filter paper (Ted Pella) was used to blot the grid for 3 seconds ...
-
bioRxiv - Molecular Biology 2019Quote: 3 μL of sample was applied to plasma cleaned lacey carbon grids (Ted Pella, Inc., 300 mesh), followed by plunge-freezing using a Vitrobot Mark IV (FEI ...
-
bioRxiv - Physiology 2020Quote: ... The sections were collected as ribbons of 3-4 sections on a 75-mesh grid (Ted Pella). Every grid was then poststained with 3% uranyl acetate in water for 10 minutes and Reynold’s lead citrate for 2 minutes ...
-
bioRxiv - Cell Biology 2023Quote: ... 3 µl of the co-polymer was applied to a continuous carbon grid (Ted Pella, 300 mesh), it was stained three times for 10 s with drops of 1.5% uranyl acetate ...
-
bioRxiv - Cancer Biology 2022Quote: ... Tumor samples were individually minced using 3-4 passes of a McIllwain tissue chopper (Ted Pella 10180) set to chop 150 mm sections at 60% of the maximal chopping rate and 50% force ...
-
bioRxiv - Microbiology 2023Quote: ... The buffer was removed and samples stained with post-fixative for 3 hours (Osmium tetroxide, Ted Pella; Tannic Acid ...
-
bioRxiv - Cell Biology 2019Quote: Cell pellets (2-3 μl) were loaded onto copper membrane carriers (1mm x 0.5 mm; Ted Pella Inc.) and cryofixed using the EM PACT2 high pressure freezer (Leica) ...
-
bioRxiv - Biochemistry 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter paper (Ted Pella Inc.)) ...
-
bioRxiv - Immunology 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter papers (Ted Pella Inc.)) ...
-
bioRxiv - Biophysics 2020Quote: ... for a total of 41 datasets at 3 different locations on a waffle pattern grating replica grid (Ted Pella). The dose symmetric tilt scheme used was adapted from others (Hagen et al. ...
-
bioRxiv - Plant Biology 2022Quote: ... The grids were blotted for 2–3 s using a pair of filter papers (55 mm, Ted Pella Inc.) at 8°C with 100% humidity and flash-frozen in liquid ethane using an FEI Vitrobot Marked IV ...
-
bioRxiv - Physiology 2023Quote: ... followed by Rayon fine cloths and alumina pastes (9, 5, 3, 1, 0.5, 0.3, and 0.05 μm, Ted Pella, Inc.).
-
bioRxiv - Biochemistry 2023Quote: ... the grids were blotted for 4.5-5 s (blot force of 3) using 595 filter paper (Ted Pella, Inc) before being immediately plunged into liquid ethane for vitrification ...
-
bioRxiv - Biochemistry 2023Quote: ... 3 μl of protein solution was applied onto a grid freshly glow-discharged in PELCO easiGlow system (Ted Pella). In-house graphene grids were prepared from Trivial Transfer Graphene sheets (ACS Material ...
-
bioRxiv - Molecular Biology 2021Quote: ... then 3 μl samples (0.133 μM complexes) were place on copper grids (300 mesh formvar/carbon-coated) (Ted Pella, USA) that were hydrophilized by glow discharge (−20 mA ...
-
bioRxiv - Biophysics 2023Quote: ... aliquots (3 μl) of the protein sample were loaded onto glow-discharged (20 s, 15 mA; Pelco easiGlow, Ted Pella) Au grids (Quantifoil ...
-
bioRxiv - Bioengineering 2023Quote: ... 3 μL of purified samples were applied on glow-discharged (40 sec, 15 mA, PELCO easiGlow™, TED PELLA Inc.) holey carbon grids (Quantifoil Cu R1.2/1.3 ...
-
bioRxiv - Microbiology 2022Quote: ... in vitro grown differentiated polarized monolayers of human ileal enteroid samples as well as mouse intestinal biopsy samples were fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Ted Pella, Inc., Redding, CA) in 100 mM sodium cacodylate buffer ...
-
bioRxiv - Biophysics 2021Quote: ... and 3 µL of sample were deposited and incubated for 2 min on freshly cleaved bare mica V1 (Ted Pella Inc.), after which was rinsed with Milli-Q water ...
-
bioRxiv - Cell Biology 2019Quote: ... 95% for 10 min and 100% for 30 min with 3 changes) and infiltrated with Epon-Aradite (Ted Pella, Redding, CA) for 2 days (25% of Epon-Aradite and ethanol for 2h ...
-
bioRxiv - Microbiology 2021Quote: ... A small drop of the suspension (~3 μL) was deposited on a Formvar-coated 200 mesh Cu TEM grid (Ted Pella) and allowed to air-dry at ambient temperature ...
-
bioRxiv - Biochemistry 2022Quote: ... pH 6.5 was applied onto glow-discharged lacey carbon grids coated with 3-nm carbon film (Ted Pella, product code #01824). The grids were incubated for 60 s under 100% humidity in a Vitrobot Mark IV (FEI ...
-
bioRxiv - Cell Biology 2020Quote: ... Cells were then spun at 3,000rpm for 3 m in a microcentrifuge and resuspended in 1mL of 4% paraformaldehyde (Ted Pella, Inc.) in a 133mM sucrose in PBS solution ...
-
bioRxiv - Bioengineering 2020Quote: ... 3 µl of labeled EVs were added onto glow-discharged formvar-carbon type B coated electron microscopy grids (Ted Pella Inc) for 3 minutes ...
-
bioRxiv - Biochemistry 2022Quote: ... Negative-stain transmission EM samples were prepped by applying 3 μl of fibril solution to glow-discharged 300 mesh carbon-coated formvar support films mounted on Cu grids (Ted Pella). The samples were wicked ...
-
bioRxiv - Biochemistry 2023Quote: Tetrahedral nanoparticles were first diluted to 100 μg/mL in water prior to application of 3 μL of sample onto freshly glow-discharged 400-mesh copper grids (Ted Pella). Sample was incubated on the grid for 30 s before excess liquid blotted away with filter paper (Whatman) ...
-
bioRxiv - Biochemistry 2023Quote: 3 μl of purified sample of each F constructs was applied to a glow discharged 300 mesh copper grids (Ted Pella) coved with evaporated continuous carbon on top of collodion (Electron Microscope Science ...
-
bioRxiv - Microbiology 2024Quote: ... Infected cells were washed 3 times with PBS before fixing in 1.5 ml of 2.5% electron microscopy-grade glutaraldehyde (Ted Pella, Redding, CA) in 0.1 M sodium cacodylate buffer (pH 7.4 ...
-
bioRxiv - Cell Biology 2020Quote: A 3 μl drop of the Nsp1–40S complex was applied to glow-discharged copper grids with lacey carbon support and a 3 nm continuous carbon film (Ted Pella, Inc). The grids were blotted for 4 s in 100% humidity at 4 °C ...
-
bioRxiv - Immunology 2022Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 μL of a 0.7 mg/ml Omicron Spike mixed with 0.16 mg/mL each of P5C3 and P2G3 Fab fragments (Final 3.2 uM Omicron Spike:1.5 uM P5C3:1.5 uM P2G3 ...
-
bioRxiv - Biophysics 2022Quote: ... a drop of 3 μl cell suspension was loaded on a glow-discharged (using a PELCO easiGlow Glow Discharger, Ted Pella Inc) grid (200 mesh gold 1.2/1.3 ...
-
bioRxiv - Genetics 2022Quote: ... and gently flattened with a large book for 3 minutes.Coverslips were sealed using clear nail polish (Ted Pella, Inc., Fisher Cat# NC1849418). Imaging was performed on a Nikon Eclipse Ti inverted spinning disk confocal microscope using a 100X 1.49 NA oil immersion objective lens ...
-
bioRxiv - Immunology 2023Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 µL of a sample containing 14 µM of the corresponding Spike and 25 µM ACE-Fc was applied to the glow-discharged grids ...
-
bioRxiv - Immunology 2023Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 µL of a sample containing 9 µM Omicron BA.1 and 16 µM mACE-Fc was applied to the glow-discharged grids ...
-
bioRxiv - Immunology 2022Quote: ... was performed by applying a drop (3 μl) of sample to a glow-discharged TEM grid (carbon supported film on 300 mesh Cu grids, Ted Pella, Ltd). After 30 sec the excess liquid was blotted ...
-
bioRxiv - Immunology 2023Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 μL of a 0.35 mg/ml protein sample was applied to the glow-discharged grids ...
-
bioRxiv - Immunology 2023Quote: Cell monolayers were washed with PBS 1x and fixed in situ for 1 hour at room temperature (RT) with 3 % glutaraldehyde (EM Grade, Ted Pella INC) in PBS 1x ...
-
bioRxiv - Biophysics 2024Quote: 3-5 µl of purified kinetochores were taken directly from elutions and deposited on glow discharged (Pelco easiGlow, Ted Pella, Redding CA) 400 mesh electron microscopy grids (01754-F F/C ...
-
bioRxiv - Plant Biology 2021Quote: ... Coverslips were mounted on 13mm aluminum stubs using double-sided carbon adhesive and sputter coated with 3 nm of gold-palladium alloy (60 Au:40 Pd, Cressington Sputter Coater 208HR, model 8000-220, Ted Pella, Redding, CA). Images were taken using a Zeiss Supra 25 FESEM operating at 5 kV ...