Labshake search
Citations for Ted Pella :
1 - 50 of 59 citations for InP ZnS PEG NH2 Quantum Dots 640 nm since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Synthetic Biology 2023Quote: PEG purified DNA origami samples were drop cast onto carbon/Formvar-coated copper grids (Ted Pella) which were first glow-discharged for 60 s and given 4 min to adsorb ...
-
bioRxiv - Plant Biology 2022Quote: ... and gold particles (6 nm, 10 nm) conjugated secondary antibodies (Ted Pella). Sections were post-stained and examined with a Hitachi 7400 TEM (Hitachi-High Technologies ...
-
bioRxiv - Synthetic Biology 2021Quote: Thiol-labeled prey-oligo (41 μM) was mixed with phosphine-treated 5 nm AuNP (200 nM, Ted Pella) in 50 mM NaCl ...
-
bioRxiv - Cell Biology 2021Quote: ... 10 nm gold fiducial markers (Ted Pella) coated in 1% BSA were diluted 1:4 or 5 in conditioned culture media and 3μl of this mixture was added on top of each grid ...
-
bioRxiv - Neuroscience 2023Quote: ... and incubated in goat anti-mouse secondary Abs conjugated to 10 nm or 20 nm-diameter gold particles (Ted Pella, Redding CA). Grids were counterstained with 1% uranyl acetate ...
-
bioRxiv - Microbiology 2022Quote: ... 10 nm colloidal gold fiducials (Ted Pella, Redding, USA) were added to the suspension (for alignment during tomogram reconstruction from tilt series) ...
-
bioRxiv - Synthetic Biology 2020Quote: ... 20 nm gold nanoparticles (AuNPs, Ted Pella, #15705-20) were used to label the gold binding peptide constitutively expressed by E ...
-
bioRxiv - Plant Biology 2021Quote: ... and then coated with 15 nm colloidal gold (Ted Pella) as a fiducial marker ...
-
bioRxiv - Biophysics 2024Quote: ... for CLEM and 10 nm colloidal gold fiducials (Ted Pella) for tilt-series alignment in tomogram reconstruction ...
-
bioRxiv - Bioengineering 2024Quote: ... then mixed with 20 nM colloidal gold nanoparticle suspension (Ted Pella Inc. ...
-
bioRxiv - Neuroscience 2020Quote: ... Then incubated with 10 nm immunogold-conjugated secondary antibodies (Ted Pella, Redding, CA) in 1% NGS in TBST with 0.5% polyethylene glycol (20,000 MW) ...
-
bioRxiv - Biochemistry 2021Quote: ... incubated with 1:20 10 nm gold-anti-mouse antibody (Ted Pella 15751), washed ...
-
bioRxiv - Neuroscience 2021Quote: ... Thin sections (80 nm) were stained with uranyl acetate and lead-citrate (Ted Pella) and examined using a JEM-1400 transmission electron microscope (JEOL ...
-
bioRxiv - Biophysics 2020Quote: ... Two microliters of sample (5 nM) were deposited onto freshly cleaved mica (Ted Pella Inc.), and 0.5 to 1.0 μl of NiCl2 at a concentration of 100 mM were added to the samples to fix the origami nanostructures on the mica surface ...
-
bioRxiv - Neuroscience 2023Quote: ... and incubated in secondary antibodies (1:10 10 nm gold-conjugated IgG, TED Pella, 15796) for 1 h at room temperature and rinsed with PBST followed by water ...
-
bioRxiv - Neuroscience 2024Quote: ... Ultra-thin sections (70 nm thickness) were then mounted onto formvar-coated grids (Ted Pella), stained with uranyl acetate and lead citrate for contrast enhancement ...
-
bioRxiv - Cell Biology 2023Quote: ... then incubated for 20 seconds with 20% 10 nm gold fiducials (Ted Pella#15703-20) + 0.05% BSA in water ...
-
bioRxiv - Biophysics 2023Quote: ... The effective tip size was calibrated with 10 nm gold nanoparticles (Ted Pella, Redding, CA) using our previously reported protocol2 ...
-
bioRxiv - Microbiology 2023Quote: ... and then coated with 12 nm platinum/palladium using a Cressington 208HR sputter coater (Ted Pella).
-
bioRxiv - Biophysics 2022Quote: ... to glow discharge Lacey carbon cryoEM grids with a 2 nm continuous carbon film (Ted Pella) for 45 seconds ...
-
bioRxiv - Molecular Biology 2023Quote: 2 nm thick carbon films supported on Quantifoil holey carbon grids (Ted Pella 668-300-Cu) were imaged with a room-temperature specimen holder in order to make quantitative measurements of the microscope’s CTF envelope as a function of the diameter of the electron beam hole in the dummies ...
-
bioRxiv - Biochemistry 2020Quote: 400M copper grids coated with lacey carbon and a 2-nm thin layer of carbon (Ted Pella Inc.) were glow discharged with 20 mA current with negative polarity for 60 s in a PELCO easiGlow glow discharge unit ...
-
bioRxiv - Microbiology 2020Quote: ... The cell suspension was then mixed with 10‐nm colloidal gold beads (Ted Pella, Inc., Redding, CA, USA) pre-coated with 5% (w/v ...
-
bioRxiv - Neuroscience 2021Quote: ... Sections were glow discharged and coated by dipping grid briefly in 10 nm colloidal gold solution (Ted Pella). Serial tomo-graphic reconstructions were generated of parallel fiber - Purkinje cell synapses using an FEI Titan 300 kV TEM equipped with a 4k x 4k CCD camera (Gatan Ultrascan) ...
-
bioRxiv - Biochemistry 2024Quote: ... The TEM was pre-aligned using a 500 nm diffraction grating replica with latex spheres (Ted Pella Inc.). The CetaD camera (4096 × 4096 pixels ...
-
bioRxiv - Microbiology 2023Quote: ... then sputter-coated with 12 nm platinum/palladium with a Cressington 208HR sputter coater (Ted Pella, Redding, CA). Scanning electron microscopy (SEM ...
-
bioRxiv - Bioengineering 2023Quote: ... The samples were coated with 3.5 nm Iridium by Cressington Vacuum Coating Systems 208HRD (Ted Pella International Company, CA) and imaged under 10.0 kV with a field-emission scanning electron microscopy (Magellan 400 ...
-
bioRxiv - Cell Biology 2024Quote: ... The ribbons were sandwiched between two layers of formvar film and coated with 15 nm gold particles (Ted Pella). Tilt series from ±60 at 1.5° intervals were collected in the brightfield transmission electron microscopy (TEM ...
-
bioRxiv - Microbiology 2021Quote: ... the sections were coated with ∼15 nm carbon using a thermal evaporation method (108C Auto Carbon Coater, Ted Pella, Inc.) and were secured with Cu sticky tape on the SEM stage ...
-
bioRxiv - Cell Biology 2021Quote: ... then sputtered coated with approximately 20 nm Pt/Pd (80/20) using Cressington HR equipment (Ted Pella,Inc. Redding CA) to reduce charging effects.
-
bioRxiv - Neuroscience 2021Quote: ... 400 mesh copper grids covered by a Formvar/Carbon film (5-10 nm) were obtained from Ted Pella (Redding, CA) and 2% aqueous uranyl acetate was purchased from Electron Microscopy Sciences (Hatfield ...
-
bioRxiv - Neuroscience 2023Quote: ... then incubated in a secondary goat anti-rabbit antibody conjugated to 10-nm colloidal gold (Ted Pella, diluted 1:100) for 30 min at room temperature ...
-
bioRxiv - Biophysics 2024Quote: ... grids (Quantifoil R1.2/1.3, Cu 200 mesh, 100 holey carbon films, 2 nm carbon support film; for images of DCVs: Ted Pella, Cu 400 mesh ...
-
bioRxiv - Biophysics 2024Quote: ... Gold substrates for the measurements were prepared by evaporating 120 nm of gold on polished AFM metal discs (Ted Pella). Peptide concentrations (<1 mM ...
-
bioRxiv - Cell Biology 2020Quote: ... sections of 160 nm thickness were cut with a 35° DiATOME ultra knife and collected on carbon-coated formvar finder grids (Ted Pella 01910-F ...
-
bioRxiv - Biochemistry 2022Quote: ... pH 6.5 was applied onto glow-discharged lacey carbon grids coated with 3-nm carbon film (Ted Pella, product code #01824). The grids were incubated for 60 s under 100% humidity in a Vitrobot Mark IV (FEI ...
-
bioRxiv - Microbiology 2020Quote: ... at a 5:1 mole ratio to a colloidal suspension of 5 nm diameter citrate-stabilized gold nanoparticles (AuNP) (Ted Pella). The suspension was vortexed briefly and then incubated at RT for 1 h on a flat-bottom shaker ...
-
bioRxiv - Physiology 2021Quote: ... The coverslips with dried samples were glued to aluminum stubs and sputter coated with 5 nm platinum using a Cressington 208HR (Ted Pella) rotary sputter coater ...
-
bioRxiv - Cell Biology 2020Quote: ... A 20-25 nm-thick conductive platinum coating was applied to the sample surface with a sputter coater (Ted Pella, Inc.), and the sample was then imaged in a Crossbeam 550 FIB-SEM workstation (Carl Zeiss Microscopy ...
-
bioRxiv - Microbiology 2023Quote: ... samples were coated with a thin iridium film of 8 nm with a magnetron sputtering Coater (208HR High-Resolution Sputter Coater, Ted Pella Inc imaged using a Nova NanoSEM 230 (FEI) ...
-
bioRxiv - Cell Biology 2024Quote: ... The coverslips with dried samples were glued to aluminum stubs and sputter coated with 5 nm platinum using a Cressington 208HR (Ted Pella) rotary sputter coater ...
-
bioRxiv - Bioengineering 2023Quote: Gel purified structures (around 1 nM) were used for AFM imaging by adsorbing 6 µl of sample onto freshly cleaved mica (V1, Ted Pella). After three minutes of incubation ...
-
bioRxiv - Cell Biology 2020Quote: A 3 μl drop of the Nsp1–40S complex was applied to glow-discharged copper grids with lacey carbon support and a 3 nm continuous carbon film (Ted Pella, Inc). The grids were blotted for 4 s in 100% humidity at 4 °C ...
-
bioRxiv - Neuroscience 2021Quote: ... Semithin (500 nm) sections were cut by using a Leica EM UC6 microtome and then incubated with 2% toluidine blue (#19451, Ted Pella Inc.) at 100°C for 2 min ...
-
bioRxiv - Synthetic Biology 2020Quote: ... 20 μL (concentration of 1-2 nM) of sample was deposited on freshly cleaved mica (Grade V1, 10 mm, #50, Ted Pella, Inc.) for 5 min ...
-
bioRxiv - Immunology 2020Quote: ... A 4:1 volume ratio of capture:non-capture was prepared and further incubated at a 1:9 volume ratio with 20 nm gold nanoparticles (AuNP; Ted Pella Inc.) for 1 hour at room temperature (RT) ...
-
bioRxiv - Immunology 2021Quote: ... Grids were rinsed (4x 10’) with PBS then labeled for 2 hrs with 10 nm gold conjugated goat anti-mouse secondary antibody (Ted Pella, Inc.). Grids were again rinsed (4x 10’ ...
-
bioRxiv - Cell Biology 2020Quote: ... a 23 ± 2 nm silver layer was deposited onto the sections using a Cressington 308R sputter coater (Ted Pella Inc, Redding, CA) as per the protocol detailed in Dufresne et al 2013 (26) ...
-
bioRxiv - Neuroscience 2024Quote: Semithin sections (500 nm) were cut using a Leica EM UC6 microtome and incubated with 2% toluidine blue (Cat#194541, Ted Pella Inc.) at 100℃ for 2 minutes ...
-
bioRxiv - Physiology 2023Quote: ... Mounted samples were then sputter coated with 5 nm of gold-palladium (60 Au:40 Pd, Cressington Sputter Coater 208HR, model 8000-220, Ted Pella Inc). Images were taken using a Zeiss Supra 25 FESEM operating at 5 kV ...