Labshake search
Citations for Ted Pella :
1 - 50 of 98 citations for ALLYL 11 12 EPOXY STEARATE TECH since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cancer Biology 2020Quote: ... and embedded in Eponate-12 epoxy resin (Ted Pella, Redding, CA). Tissue samples were sectioned (85nm thickness ...
-
bioRxiv - Physiology 2023Quote: ... and embedded in Eponate 12 epoxy resin (Ted Pella Inc., Redding, CA, USA). Ultrathin sections (70 nm ...
-
bioRxiv - Systems Biology 2023Quote: ... and embedded in Eponate 12 epoxy resin (Ted Pella Inc., Redding, CA, USA). Ultrathin sections (70 nm ...
-
bioRxiv - Cell Biology 2022Quote: ... rinsed twice with finally embedded in epoxy resin Eponate-12 (Ted Pella, Redding, CA, USA). Semithin sections (500 nm thickness ...
-
bioRxiv - Bioengineering 2024Quote: Portions from mineralized scaffolds were embedded in epoxy (PELCO epoxy, Ted Pella) and then ground to just below the samples surface with silicon carbide papers and then polished with a graded diamond suspension series to a final polish of 1 µm ...
-
bioRxiv - Biophysics 2024Quote: ... using silver epoxy (Ted Pella) and sputter coated with a thin layer of Au/Pd ...
-
bioRxiv - Genetics 2022Quote: ... using silver epoxy (Ted Pella Inc.), and allowed to harden for 24 hours at room temperature ...
-
bioRxiv - Neuroscience 2021Quote: ... using silver conductive epoxy (Ted Pella Inc.) to electrically ground tissue block ...
-
bioRxiv - Developmental Biology 2023Quote: ... using silver epoxy (Ted Pella, Redding CA) and sputter-coated with a thin layer of Au/Pd before being subjected to block-face imaging ...
-
bioRxiv - Neuroscience 2021Quote: ... Samples were mounted on a stub using silver epoxy resin (Ted Pella) with the sections perpendicular to the stub surface so that they were parallel to the milling beam ...
-
bioRxiv - Cell Biology 2023Quote: ... The complete embedding solution was Eponate12 epoxy resin (Ted Pella, Inc., USA). Cells were Infiltrated with complete embedding solution and acetone (1:2 ...
-
bioRxiv - Cell Biology 2024Quote: ... Uranyl acetate was from Lobachemie and epoxy resin components were from TED Pella. Antibodies were from Thermo Fisher Scientific ...
-
bioRxiv - Microbiology 2023Quote: ... Uranyl acetate was from Loba Chemie and epoxy resin constituents were from TED PELLA. P ...
-
bioRxiv - Cell Biology 2021Quote: ... the blocks were mounted on a SEM stub using silver conductive epoxy resin (Ted Pella). In case the block was later to be imaged again at the confocal to identify a second target ...
-
bioRxiv - Developmental Biology 2022Quote: ... The sample was then attached on a stub using conductive silver epoxy resin (Ted Pella) and gold sputter coated (Quorum Q150RS).
-
bioRxiv - Cell Biology 2022Quote: ... the blocks were mounted on a SEM stub using silver conductive epoxy resin (Ted Pella). After mounting ...
-
bioRxiv - Neuroscience 2024Quote: ... mounted to a serial block-face EM (SBEM) specimen rivet using conductive silver epoxy (Ted Pella), and left at 60°C overnight ...
-
bioRxiv - Biophysics 2024Quote: ... The cut anther was then embedded in slow cure epoxy resin (Pelco, Ted Pella, Redding, CA, USA) for at least a week to allow the epoxy to reach full strength ...
-
bioRxiv - Neuroscience 2020Quote: ... The specimen was removed from the Aclar and mounted to an aluminum scanning electron microscope (SEM) rivet with conductive silver epoxy (Ted Pella) with the exposed tissue face in contact with silver epoxy ...
-
bioRxiv - Microbiology 2020Quote: ... the sample block was mounted on an aluminum 3View pin and electrically grounded using silver conductive epoxy (Ted Pella, catalog #16014). The entire surface of the specimen was then sputter coated with a thin layer of gold/palladium and imaged using the Gatan OnPoint BSE detector in a Zeiss Gemini 300 VP FESEM equipped with a Gatan 3View automatic microtome ...
-
bioRxiv - Microbiology 2023Quote: Each sample block was mounted on an aluminum 3View pin and electrically grounded using silver conductive epoxy (Ted Pella, catalog #16014). The entire surface of the specimen was then sputter coated with a thin layer of gold/palladium and imaged using the Gatan OnPoint BSE detector in a Zeiss Gemini 300 VP FESEM equipped with a Gatan 3View automatic microtome ...
-
bioRxiv - Genetics 2021Quote: ... and 100%), and embedded in epoxy resin through increasing concentrations (25, 50, 75, and 100%) using PELCO Biowave+ tissue processor (Ted Pella, USA), and then cured at 60°C for three days ...
-
bioRxiv - Neuroscience 2024Quote: ... and embedded in Eponate 12 (Ted Pella, Inc). Ultrathin sections (60–65 nm ...
-
bioRxiv - Microbiology 2024Quote: ... and embedding in Eponate 12 (Ted Pella, Inc). Ultrathin sections (60–65 nm ...
-
bioRxiv - Microbiology 2024Quote: ... and embedding in Eponate 12 (Ted Pella, Inc). Ultrathin sections (60–65 nm ...
-
bioRxiv - Cell Biology 2024Quote: ... and embedding in Eponate 12 (Ted Pella, Inc). Ultrathin sections (60–65 nm ...
-
bioRxiv - Neuroscience 2021Quote: ... and embedded in Eponate-12 (Ted Pella, Redding, CA). Ultrathin sections (60 nm ...
-
bioRxiv - Cell Biology 2021Quote: ... the samples were embedded in Eponate 12 (Ted Pella). Ultramicrotomy was performed and ultrathin sections (70 nm ...
-
bioRxiv - Microbiology 2022Quote: ... and embedded in Eponate 12 resin (Ted Pella Inc). Sections of 95 nm were cut with a Leica Ultracut UCT ultramicrotome (Leica Microsystems Inc. ...
-
bioRxiv - Microbiology 2022Quote: ... and embedded in Eponate 12 resin (Ted Pella Inc). Sections of 95 nm were cut with a Leica Ultracut UCT ultramicrotome (Leica Microsystems Inc. ...
-
bioRxiv - Neuroscience 2022Quote: ... propylene oxide and embedded in Eponate 12 (Ted Pella) resin ...
-
bioRxiv - Cell Biology 2024Quote: ... then embedded in Eponate 12 resin (Ted Pella, #18005). Sections ...
-
bioRxiv - Microbiology 2022Quote: ... and embedded in Eponate 12 resin (Ted Pella, Inc.). Sections of 95 nm were cut with a Leica Ultracut UCT ultramicrotome (Leica Microsystems Inc. ...
-
bioRxiv - Microbiology 2022Quote: ... and embedded in Eponate 12 resin (Ted Pella Inc). Sections of 95 nm were cut with a Leica Ultracut UCT ultramicrotome (Leica Microsystems Inc. ...
-
bioRxiv - Microbiology 2024Quote: ... and embedded in Eponate 12 resin (Ted Pella, Inc.) cut into sections (95 nm ...
-
bioRxiv - Cell Biology 2021Quote: ... samples embedded in eponate 12 medium (Ted Pella, Redding, CA). Ultrathin sections (85 nm ...
-
bioRxiv - Microbiology 2023Quote: ... and finally embedded in Eponate 12 resin (Ted Pella Inc.). Sections of 95 nm were cut with a Leica Ultracut UCT ultramicrotome (Leica Microsystems Inc. ...
-
bioRxiv - Developmental Biology 2022Quote: ... and one side of the thorax was punctured using a blunt 0.005 inch diameter tungsten needle (Ted Pella #27-11). Flies were then returned to vials ...
-
bioRxiv - Bioengineering 2021Quote: ... infiltrated and embedded in resin (Eponate-12; Ted Pella, Redding, CA), and polymerized in a 65°C oven ...
-
bioRxiv - Microbiology 2021Quote: ... and embedded in Eponate 12 resin (Ted Pella Inc., Redding, CA). Sections of 95 nm were cut with a Leica Ultracut UCT ultramicrotome (Leica Microsystems Inc. ...
-
bioRxiv - Microbiology 2023Quote: ... and then infiltrated and embedded in Eponate 12 resin (Ted Pella).
-
bioRxiv - Immunology 2024Quote: ... the samples were embedded in Epon 12 (Ted Pella, Redding, CA). Ultramicrotomy was performed ...
-
bioRxiv - Microbiology 2024Quote: ... Cells were embedded into an Eponate 12 Resin (Ted Pella inc) and left for two days at 60°C to achieve complete polymerization ...
-
bioRxiv - Immunology 2021Quote: ... and polymerized in Eponate 12 resin (Ted Pella Inc., Redding, CA, USA). Sections of ~70 nm thickness were cut using a Leica Ultracut S ultramicrotome and stained with 5% uranyl acetate and 2% lead citrate prior to imaging ...
-
bioRxiv - Biochemistry 2020Quote: ... Freshly cleaved muscovite mica (12 mm diameter; Ted Pella Inc. grade V1) was mounted on a teflon disc (16 mm ...
-
bioRxiv - Cell Biology 2024Quote: ... mounted on 12 mm Al stubs (Ted Pella, Redding, CA, cat# 16111) using double sticky carbon tabs ...
-
bioRxiv - Neuroscience 2024Quote: ... sections were infiltrated with Eponate 12 resin (Ted Pella Inc, Cat#18010) and then flat-embedded between Aclar films (Ted Pella Inc ...
-
bioRxiv - Physiology 2024Quote: ... the samples were embedded in Eponate 12 resin (Ted Pella, Redding, CA). After the polymerization of Epon ...
-
bioRxiv - Physiology 2023Quote: ... They were then gradually infiltrated with Eponate 12 Resin (TED PELLA 18010), and polymerization of the resin was processed for 48 h at 60ºC ...
-
bioRxiv - Immunology 2024Quote: ... followed by embedding with Eponate-12 Resin (Ted Pella, Redding, CA, USA) and cut into 100 nm sections.