Labshake search
Citations for Ted Pella :
1 - 50 of 288 citations for 8 4 ethoxy 3 methoxyphenyl 1 5 diazabicyclo 3.2.1 octane since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Developmental Biology 2021Quote: ... glass slides (4’’ by 3’’; Ted Pella) and the feature-side of the PDMS slabs were thoroughly cleaned with tape to remove any dust particles ...
-
bioRxiv - Physiology 2023Quote: ... followed by Rayon fine cloths and alumina pastes (9, 5, 3, 1, 0.5, 0.3, and 0.05 μm, Ted Pella, Inc.).
-
bioRxiv - Cell Biology 2020Quote: Cells grown on coverslips were fixed with cold methanol for 8 min at −20°C or 4% formaldehyde (Ted Pella, Inc.) for 15 min at room temperature ...
-
bioRxiv - Physiology 2020Quote: ... The sections were collected as ribbons of 3-4 sections on a 75-mesh grid (Ted Pella). Every grid was then poststained with 3% uranyl acetate in water for 10 minutes and Reynold’s lead citrate for 2 minutes ...
-
bioRxiv - Cancer Biology 2022Quote: ... Tumor samples were individually minced using 3-4 passes of a McIllwain tissue chopper (Ted Pella 10180) set to chop 150 mm sections at 60% of the maximal chopping rate and 50% force ...
-
bioRxiv - Biochemistry 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter paper (Ted Pella Inc.)) ...
-
bioRxiv - Immunology 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter papers (Ted Pella Inc.)) ...
-
bioRxiv - Developmental Biology 2021Quote: ... Reusable molds were assembled by taping 3D-printed molds to glass slides (5” by 4”; Ted Pella). Sylgard 184 PDMS monomer and curing agent (Ellsworth Adhesives 4019862 ...
-
bioRxiv - Microbiology 2023Quote: ... 5 minutes in 1:1 absolute ethanol (Thermo) to hexamethyldisilazane (HMDS, Ted Pella), and 5 minutes in 100% HMDS ...
-
bioRxiv - Biochemistry 2023Quote: ... the grids were blotted for 4.5-5 s (blot force of 3) using 595 filter paper (Ted Pella, Inc) before being immediately plunged into liquid ethane for vitrification ...
-
bioRxiv - Cell Biology 2020Quote: ... Cells were then spun at 3,000rpm for 3 m in a microcentrifuge and resuspended in 1mL of 4% paraformaldehyde (Ted Pella, Inc.) in a 133mM sucrose in PBS solution ...
-
bioRxiv - Biophysics 2024Quote: 3-5 µl of purified kinetochores were taken directly from elutions and deposited on glow discharged (Pelco easiGlow, Ted Pella, Redding CA) 400 mesh electron microscopy grids (01754-F F/C ...
-
bioRxiv - Microbiology 2020Quote: ... at a 5:1 mole ratio to a colloidal suspension of 5 nm diameter citrate-stabilized gold nanoparticles (AuNP) (Ted Pella). The suspension was vortexed briefly and then incubated at RT for 1 h on a flat-bottom shaker ...
-
bioRxiv - Plant Biology 2023Quote: ... The resin was then polymerized at 4°C under UV light for 3 days using a PELCO UVC3 Cryo Chamber (Ted Pella, Redding, CA, USA). Serial semi-thin sections (0.25 μm thick ...
-
bioRxiv - Molecular Biology 2019Quote: ... cells (4 × 106) were cross-linked with 1% formaldehyde (Ted Pella Inc., Redding, CA) for 10 minutes at room temperature ...
-
bioRxiv - Biochemistry 2020Quote: ... Incubated bacteria (5 μl) were dispersed on 5×5 mm silicon wafers (Ted Pella, USA) that had been prewashed with ethanol ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... filters were cut into ~1/8 sections and placed onto an analysis bullet using adhesive and conductive tabs (#16084–6, Ted Pella, Redding, California) and sputter coated with ~5 nm gold particles ...
-
bioRxiv - Microbiology 2021Quote: ... Membranes were air dried and mounted with a 4:1 mixture of Citifluor™ (Ted Pella, Inc.) and Vectashield® (Vector Laboratories Inc. ...
-
bioRxiv - Bioengineering 2023Quote: ... we sealed the coverslips with black nail polish (114-8, Ted Pella) and left them overnight to dry.
-
bioRxiv - Neuroscience 2020Quote: ... and stained for 60-90 sec with 5 μL of 1% uranyl acetate (Ted Pella, Inc.). All samples were imaged at an accelerating voltage of 80 kV in a JEOL JSM 1400 Plus (JOEL).
-
bioRxiv - Genomics 2023Quote: ... washed three times with 0.1 M PBS at 4 °C and then fixed with 1% osmium tetroxide (Ted Pella, USA) in PBS for 1.5 h ...
-
bioRxiv - Microbiology 2023Quote: ... coverslips were washed once with PBS and fixed in 4% paraformaldehyde (Ted Pella Inc., 18505, diluted in 1 x PBS) for 10 min at room temperature ...
-
bioRxiv - Immunology 2023Quote: Cell monolayers were washed with PBS 1x and fixed in situ for 1 hour at room temperature (RT) with 3 % glutaraldehyde (EM Grade, Ted Pella INC) in PBS 1x ...
-
bioRxiv - Microbiology 2021Quote: ... using carbon tape (16084-3, TED PELLA, Redding, CA). To increase conduction ...
-
bioRxiv - Neuroscience 2020Quote: ... The specimens were then centrifuged onto the surface of 5 x 5 mm2 silicon chips (Ted Pella), fixed ...
-
bioRxiv - Cell Biology 2021Quote: Cells were fixed with 4% paraformaldehyde (Ted Pella) in 100 mM sucrose for 20 min ...
-
bioRxiv - Neuroscience 2024Quote: ... and 4% Paraformaldehyde (PFA) (Ted Pella, Inc., USA), consecutively for immunostaining experiments ...
-
bioRxiv - Neuroscience 2024Quote: ... and 4% Paraformaldehyde (PFA) (Ted Pella, Inc., USA), consecutively for immunostaining experiments ...
-
bioRxiv - Cell Biology 2019Quote: ... Samples for electron tomography included 0.5 µl of 5-nm fiducial gold (Ted Pella Inc. Cat. 82150-5) applied to the sample drop ...
-
bioRxiv - Neuroscience 2022Quote: ... post-fixed for 2 h in 4% PFA at 4°C and immediately sectioned in coronal slices (50 μm) using a vibratome (Ted Pella). Coronal sections were incubated with 10 mM sodium citrate (pH 6.0 ...
-
bioRxiv - Cell Biology 2021Quote: ... and SEC fractions were fixed with an equal volume of 2x Karnovsky fixative (0.2M Na cacodylate, 4% paraformaldehyde and 4% glutaraldehyde)(Ted Pella Inc.), mixed gently and incubated on ice for 30 min ...
-
bioRxiv - Molecular Biology 2024Quote: ... #5 Dumont fine forceps (Ted Pella, Inc.) were placed between the Drosophila head and thorax to remove the head from the remainder of the body ...
-
bioRxiv - Molecular Biology 2023Quote: ... were glow-discharged for 8 s at 10 mA using a PELCO easiGlow glow discharging system (Ted Pella) and loaded into the EM GP2 chamber ...
-
bioRxiv - Biochemistry 2020Quote: Cryo-EM grids were prepared by applying 3 μl protein samples to glow-discharged (PELCO easiGlow™ Ted Pella Inc., at 15 mA for 1 minute) holey carbon grids (Quantifoil R 1.2/1.3 ...
-
bioRxiv - Biochemistry 2022Quote: Cryo-EM grids were prepared by applying 3 µl protein samples to glow-discharged (PELCO easiGlow™ Ted Pella Inc., at 15 mA for 1 minute) holey carbon grids (Quantifoil R 1.2/1.3 ...
-
bioRxiv - Cell Biology 2020Quote: ... 10 minutes in 4% paraformaldehyde (Ted Pella, Redding, CA) in 1x PBS ...
-
bioRxiv - Systems Biology 2021Quote: ... tissue sections were fixed in 4% paraformaldehyde (Ted Pella) for 10 min ...
-
bioRxiv - Pathology 2020Quote: Pancreatic lobules were fixed in 4% paraformaldehyde (Ted Pella) overnight ...
-
bioRxiv - Microbiology 2020Quote: ... Osmium Tetroxide (OsO4) (4%) and Glutaraldehyde from Ted Pella Inc ...
-
bioRxiv - Neuroscience 2021Quote: ... for 1 minute to equilibrate before microwave-based antigen retrieval in a PELCO BioWave Pro microwave (550W for 5 minutes; Ted Pella, Redding, California). Following antigen retrieval ...
-
bioRxiv - Neuroscience 2021Quote: ... using #5 Dumont fine forceps (Ted Pella, Inc.), for each dissection a Drosophila head was isolated in PBS (often supplemented with 0.1% Triton X-100) ...
-
bioRxiv - Neuroscience 2020Quote: ... Tissue was trimmed of all surrounding resin and adhered to 8 mm aluminum pins (Ted Pella Inc., Redding, CA) using EpoTek silver epoxy (EMS ...
-
bioRxiv - Cancer Biology 2019Quote: ... the samples described above can also be screened via traditional SEM imaging by mounting a semi-thin 250-350 nm section of the 1 mm2 block faces onto a glow discharged 5×7 mm silicon chip (Ted Pella, Inc., cat# 16007). For the silicon chip surface activation ...
-
bioRxiv - Bioengineering 2023Quote: 20 µL of the sample were drop casted several times until a thin film was formed on top of a 5×5 mm Si wafer (Ted Pella). A Phoibos 150 (SPECS ...
-
bioRxiv - Cell Biology 2019Quote: ... and fixed for 15 minutes with 4% formaldehyde (Ted Pella). After two PBS washes ...
-
bioRxiv - Microbiology 2020Quote: ... with pre-warmed 4% paraformaldehyde (PFA) (Ted Pella Inc., 18505) for 10 min at RT ...
-
bioRxiv - Cell Biology 2023Quote: ... lungs were fixed again using 4% PFA (Ted Pella, #18505) for 2 hours and then processed for embedding following standard procedures ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 pyruvate) using vibratome (Vibratome 1000 plus, Ted Pella Inc., CA, USA). Slices were transferred and kept for 1 hour at room temperature in artificial cerebrospinal fluid (ACSF ...
-
Self-organization of embryonic stem cells into a reproducible embryo model through epigenome editingbioRxiv - Developmental Biology 2024Quote: ... The lid was put on the 8 well chamber slide and sealed with clear nail polish (Ted Pella,114-7). Slides were stored overnight at 4°C to let the CPEMs settle before imaging ...
-
bioRxiv - Cancer Biology 2022Quote: ... which were prepared by biopsy punch (3 mm in diameter, Ted Pella, Sweden). 20 μl of conditioned media was added into the loading chambers followed by incubation for 12 hours at 4 °C ...