Labshake search
Citations for Ted Pella :
1 - 50 of 165 citations for 8 3 5 DIMETHYL 4 METHOXYPHENYL 8 OXOOCTANOIC ACID since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2020Quote: Cells grown on coverslips were fixed with cold methanol for 8 min at −20°C or 4% formaldehyde (Ted Pella, Inc.) for 15 min at room temperature ...
-
bioRxiv - Bioengineering 2023Quote: ... we sealed the coverslips with black nail polish (114-8, Ted Pella) and left them overnight to dry.
-
bioRxiv - Developmental Biology 2021Quote: ... glass slides (4’’ by 3’’; Ted Pella) and the feature-side of the PDMS slabs were thoroughly cleaned with tape to remove any dust particles ...
-
bioRxiv - Molecular Biology 2023Quote: ... were glow-discharged for 8 s at 10 mA using a PELCO easiGlow glow discharging system (Ted Pella) and loaded into the EM GP2 chamber ...
-
bioRxiv - Neuroscience 2020Quote: ... Tissue was trimmed of all surrounding resin and adhered to 8 mm aluminum pins (Ted Pella Inc., Redding, CA) using EpoTek silver epoxy (EMS ...
-
Self-organization of embryonic stem cells into a reproducible embryo model through epigenome editingbioRxiv - Developmental Biology 2024Quote: ... The lid was put on the 8 well chamber slide and sealed with clear nail polish (Ted Pella,114-7). Slides were stored overnight at 4°C to let the CPEMs settle before imaging ...
-
bioRxiv - Bioengineering 2020Quote: ... CDDO-Me-NPs at 0.3 mg/mL in phosphate buffered saline (PBS) were prepared for TEM by pipetting 8 μL atop Formvar on copper 400 mesh TEM grids (Ted Pella) that were treated with glow discharge (PELCO easiGlow™ Glow Discharge Cleaning System) ...
-
bioRxiv - Microbiology 2023Quote: ... samples were coated with a thin iridium film of 8 nm with a magnetron sputtering Coater (208HR High-Resolution Sputter Coater, Ted Pella Inc imaged using a Nova NanoSEM 230 (FEI) ...
-
bioRxiv - Immunology 2024Quote: ... Individual TEM grids were prepared by applying 8 µL of protein sample onto the carbon surface of 300 mesh lacey formvar/carbon TEM grids (Ted Pella Inc.) for 90 seconds ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... filters were cut into ~1/8 sections and placed onto an analysis bullet using adhesive and conductive tabs (#16084–6, Ted Pella, Redding, California) and sputter coated with ~5 nm gold particles ...
-
bioRxiv - Physiology 2020Quote: ... The sections were collected as ribbons of 3-4 sections on a 75-mesh grid (Ted Pella). Every grid was then poststained with 3% uranyl acetate in water for 10 minutes and Reynold’s lead citrate for 2 minutes ...
-
bioRxiv - Cancer Biology 2022Quote: ... Tumor samples were individually minced using 3-4 passes of a McIllwain tissue chopper (Ted Pella 10180) set to chop 150 mm sections at 60% of the maximal chopping rate and 50% force ...
-
bioRxiv - Biochemistry 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter paper (Ted Pella Inc.)) ...
-
bioRxiv - Immunology 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter papers (Ted Pella Inc.)) ...
-
bioRxiv - Developmental Biology 2021Quote: ... Reusable molds were assembled by taping 3D-printed molds to glass slides (5” by 4”; Ted Pella). Sylgard 184 PDMS monomer and curing agent (Ellsworth Adhesives 4019862 ...
-
bioRxiv - Physiology 2023Quote: ... followed by Rayon fine cloths and alumina pastes (9, 5, 3, 1, 0.5, 0.3, and 0.05 μm, Ted Pella, Inc.).
-
bioRxiv - Biochemistry 2023Quote: ... the grids were blotted for 4.5-5 s (blot force of 3) using 595 filter paper (Ted Pella, Inc) before being immediately plunged into liquid ethane for vitrification ...
-
bioRxiv - Cell Biology 2020Quote: ... Cells were then spun at 3,000rpm for 3 m in a microcentrifuge and resuspended in 1mL of 4% paraformaldehyde (Ted Pella, Inc.) in a 133mM sucrose in PBS solution ...
-
bioRxiv - Biophysics 2024Quote: 3-5 µl of purified kinetochores were taken directly from elutions and deposited on glow discharged (Pelco easiGlow, Ted Pella, Redding CA) 400 mesh electron microscopy grids (01754-F F/C ...
-
bioRxiv - Plant Biology 2023Quote: ... The resin was then polymerized at 4°C under UV light for 3 days using a PELCO UVC3 Cryo Chamber (Ted Pella, Redding, CA, USA). Serial semi-thin sections (0.25 μm thick ...
-
bioRxiv - Biochemistry 2020Quote: ... Incubated bacteria (5 μl) were dispersed on 5×5 mm silicon wafers (Ted Pella, USA) that had been prewashed with ethanol ...
-
bioRxiv - Pathology 2023Quote: ... samples were fixed with 1% osmic acid (Ted pella, Shanghai, China) for 1 h ...
-
bioRxiv - Microbiology 2021Quote: ... using carbon tape (16084-3, TED PELLA, Redding, CA). To increase conduction ...
-
bioRxiv - Neuroscience 2020Quote: ... The specimens were then centrifuged onto the surface of 5 x 5 mm2 silicon chips (Ted Pella), fixed ...
-
bioRxiv - Cell Biology 2021Quote: Cells were fixed with 4% paraformaldehyde (Ted Pella) in 100 mM sucrose for 20 min ...
-
bioRxiv - Neuroscience 2024Quote: ... and 4% Paraformaldehyde (PFA) (Ted Pella, Inc., USA), consecutively for immunostaining experiments ...
-
bioRxiv - Neuroscience 2024Quote: ... and 4% Paraformaldehyde (PFA) (Ted Pella, Inc., USA), consecutively for immunostaining experiments ...
-
bioRxiv - Cell Biology 2019Quote: ... Samples for electron tomography included 0.5 µl of 5-nm fiducial gold (Ted Pella Inc. Cat. 82150-5) applied to the sample drop ...
-
bioRxiv - Neuroscience 2022Quote: ... post-fixed for 2 h in 4% PFA at 4°C and immediately sectioned in coronal slices (50 μm) using a vibratome (Ted Pella). Coronal sections were incubated with 10 mM sodium citrate (pH 6.0 ...
-
bioRxiv - Cell Biology 2021Quote: ... and SEC fractions were fixed with an equal volume of 2x Karnovsky fixative (0.2M Na cacodylate, 4% paraformaldehyde and 4% glutaraldehyde)(Ted Pella Inc.), mixed gently and incubated on ice for 30 min ...
-
bioRxiv - Molecular Biology 2024Quote: ... #5 Dumont fine forceps (Ted Pella, Inc.) were placed between the Drosophila head and thorax to remove the head from the remainder of the body ...
-
bioRxiv - Cell Biology 2020Quote: ... 10 minutes in 4% paraformaldehyde (Ted Pella, Redding, CA) in 1x PBS ...
-
bioRxiv - Systems Biology 2021Quote: ... tissue sections were fixed in 4% paraformaldehyde (Ted Pella) for 10 min ...
-
bioRxiv - Pathology 2020Quote: Pancreatic lobules were fixed in 4% paraformaldehyde (Ted Pella) overnight ...
-
bioRxiv - Microbiology 2020Quote: ... Osmium Tetroxide (OsO4) (4%) and Glutaraldehyde from Ted Pella Inc ...
-
bioRxiv - Neuroscience 2021Quote: ... using #5 Dumont fine forceps (Ted Pella, Inc.), for each dissection a Drosophila head was isolated in PBS (often supplemented with 0.1% Triton X-100) ...
-
bioRxiv - Microbiology 2020Quote: ... at a 5:1 mole ratio to a colloidal suspension of 5 nm diameter citrate-stabilized gold nanoparticles (AuNP) (Ted Pella). The suspension was vortexed briefly and then incubated at RT for 1 h on a flat-bottom shaker ...
-
bioRxiv - Bioengineering 2023Quote: 20 µL of the sample were drop casted several times until a thin film was formed on top of a 5×5 mm Si wafer (Ted Pella). A Phoibos 150 (SPECS ...
-
bioRxiv - Cell Biology 2019Quote: ... and fixed for 15 minutes with 4% formaldehyde (Ted Pella). After two PBS washes ...
-
bioRxiv - Microbiology 2020Quote: ... with pre-warmed 4% paraformaldehyde (PFA) (Ted Pella Inc., 18505) for 10 min at RT ...
-
bioRxiv - Cell Biology 2023Quote: ... lungs were fixed again using 4% PFA (Ted Pella, #18505) for 2 hours and then processed for embedding following standard procedures ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 pyruvate) using vibratome (Vibratome 1000 plus, Ted Pella Inc., CA, USA). Slices were transferred and kept for 1 hour at room temperature in artificial cerebrospinal fluid (ACSF ...
-
bioRxiv - Cancer Biology 2022Quote: ... which were prepared by biopsy punch (3 mm in diameter, Ted Pella, Sweden). 20 μl of conditioned media was added into the loading chambers followed by incubation for 12 hours at 4 °C ...
-
bioRxiv - Cell Biology 2020Quote: ... and embedded in JB-4 Plus resin (Ted Pella, Redding, CA). Sections 4 µm thick were cut on a Leica EMUC6 Ultramicrotome (Leica Microsystems ...
-
bioRxiv - Developmental Biology 2019Quote: ... The samples were then fixed for 3 minutes using the Pelco Biowave (Ted Pella), followed by overnight fixation at 4°C ...
-
bioRxiv - Developmental Biology 2023Quote: ... 3×10 minutes and dehydrated using a Pelco BioWave Pro Microwave (Ted Pella, Inc.) as follows ...
-
bioRxiv - Developmental Biology 2022Quote: ... Rectangles of silicon wafer approximately 2×4 cm (Ted Pella, No 16015) were cut from the round plate glow discharged ...
-
bioRxiv - Molecular Biology 2024Quote: ... brains were dissected using #5 Dumont fine forceps (Ted Pella, Inc.) in PBS supplemented with 0.1% Triton X-100 (0.1% PBS-T) ...
-
bioRxiv - Biophysics 2023Quote: ... a 3 µL drop was applied to carbon coated 400 mesh copper grids (Ted Pella) that were glow discharged at 15 mA for 1 min ...
-
bioRxiv - Cell Biology 2023Quote: Tissues were dissected and fixed overnight in in 4% paraformaldehyde (Ted Pella, #18505) overnight at 4°C ...