Labshake search
Citations for Ted Pella :
1 - 50 of 79 citations for 7 chlorobenzo b thiophen 3 2H one since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Bioengineering 2020Quote: ... 3 µl of labeled EVs were added onto glow-discharged formvar-carbon type B coated electron microscopy grids (Ted Pella Inc) for 3 minutes ...
-
bioRxiv - Cell Biology 2022Quote: ... Double side Carbon conductive tape (Cat# 16084-7, Ted Pella Inc) was used to immobilize the wafer on an aluminum SEM sample holder ...
-
bioRxiv - Cell Biology 2020Quote: ... placed individually into brass planchettes (Type A/B; Ted Pella, Inc.), and rapidly frozen with a HPM-010 High Pressure Freezing machine (BalTec/ABRA) ...
-
bioRxiv - Microbiology 2020Quote: ... deposited on Type-B carbon-coated copper grids (Ted Pella Inc.), were examined in a JEOL 2010-F HR-TEM (Jeol Ltd.) ...
-
bioRxiv - Biophysics 2023Quote: ... glow-discharged grids (Carbon Type-B, 400 mesh, Cu, Ted Pella) were floated on a 5 µL sample bead on parafilm for 1 minute ...
-
bioRxiv - Cell Biology 2022Quote: ... Pellets were transferred to brass planchettes (type A/B; Ted Pella, Inc.) and ultra-rapidly frozen with a HPM-010 high-pressure freezing machine (Bal-Tec/ABRA) ...
-
bioRxiv - Neuroscience 2023Quote: ... Carbon-B grids (formvar carbon coated copper 400 mesh) from Ted Pella were used ...
-
bioRxiv - Cancer Biology 2023Quote: ... dropped onto a TEM grid (Ted Pella Inc, Carbon Type-B, 200 mesh, Copper), allowed to dry ...
-
bioRxiv - Developmental Biology 2021Quote: ... glass slides (4’’ by 3’’; Ted Pella) and the feature-side of the PDMS slabs were thoroughly cleaned with tape to remove any dust particles ...
-
bioRxiv - Cell Biology 2020Quote: ... Copper coated carbon grids were purchased from Ted Pella (01814F, carbon type-B, 400 mesh, Cu) DMEM advanced F12 media (12634010) ...
-
bioRxiv - Biophysics 2023Quote: ... The samples with treated RAW264.7 cells were washed with 0.1M HEPES buffer (pH 7.4) and fixed with 2.5 % of glutaraldehyde (Ted Pella, Inc) in the same buffer for 2 hours ...
-
bioRxiv - Microbiology 2021Quote: ... using carbon tape (16084-3, TED PELLA, Redding, CA). To increase conduction ...
-
bioRxiv - Cancer Biology 2019Quote: ... The NPs were supported in a copper mesh covered with carbon (Support Films, Carbon Type-B, Ted Pella, inc.). The observations were performed with a TEM HT7700 (Hitashi ...
-
Self-organization of embryonic stem cells into a reproducible embryo model through epigenome editingbioRxiv - Developmental Biology 2024Quote: ... The lid was put on the 8 well chamber slide and sealed with clear nail polish (Ted Pella,114-7). Slides were stored overnight at 4°C to let the CPEMs settle before imaging ...
-
bioRxiv - Microbiology 2021Quote: ... Phages (3.5 µL) were deposited and incubated for 1 min on TEM grids (Carbon Type-B 400 mesh, TED PELLA). Grids were washed thrice with 40 µL of MilliQ water and stained with 3.5 µL of 2% (w/v ...
-
bioRxiv - Bioengineering 2019Quote: ... samples were sandwiched between two carriers (200 μm brass planchet, Type B freezer hats, Ted Pella, Inc., Redding, CA, USA), filled with 1-hexadecane (Sigma-Aldrich ...
-
bioRxiv - Bioengineering 2022Quote: ... A drop of plasmonic nanostructure aqueous dispersion was casted onto the copper grids (Carbon Type-B, 200 mesh, Ted Pella, USA). The extinction spectra of plasmonic nanostructures were acquired using shimadzu UV-1800 spectrophotometer ...
-
bioRxiv - Developmental Biology 2022Quote: ... and one side of the thorax was punctured using a blunt 0.005 inch diameter tungsten needle (Ted Pella #27-11). Flies were then returned to vials ...
-
bioRxiv - Molecular Biology 2021Quote: ... Grids were glow-discharged at −20 or −25 mA for one minute using a PELCO easiGlow glow discharger (Ted Pella). 3-4 μl of samples were applied onto grids using a Vitrobot (Thermo Fisher) ...
-
bioRxiv - Biophysics 2023Quote: ... or C2AV67D was spotted for one minute on 200 mesh nickel grids coated in formvar/carbon (Ted Pella, Redding, CA). The sample was blotted with filter paper ...
-
bioRxiv - Biochemistry 2023Quote: ... the chip was laid on one side of a bi-adhesive plastic disc coated with conductive material (Ted Pella Inc.) which was in turn attached to the surface of a standard pin stub mount for SEM ...
-
bioRxiv - Microbiology 2024Quote: ... The still moist grids were then touched to one drop of NanoW tungsten stain (Ted Pella; product #09S432, lot #14702), the excess was wicked off immediately with filter paper before repeating this step on a second drop of Nano-W ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 pyruvate) using vibratome (Vibratome 1000 plus, Ted Pella Inc., CA, USA). Slices were transferred and kept for 1 hour at room temperature in artificial cerebrospinal fluid (ACSF ...
-
bioRxiv - Cancer Biology 2019Quote: ... the samples described above can also be screened via traditional SEM imaging by mounting a semi-thin 250-350 nm section of the 1 mm2 block faces onto a glow discharged 5×7 mm silicon chip (Ted Pella, Inc., cat# 16007). For the silicon chip surface activation ...
-
bioRxiv - Biochemistry 2023Quote: ... a few μl of these suspensions were poured on the surface of a 5×7 mm silicon chip (Ted Pella Inc, Redding, CA, USA). After evaporation of the solvent ...
-
bioRxiv - Cancer Biology 2022Quote: ... which were prepared by biopsy punch (3 mm in diameter, Ted Pella, Sweden). 20 μl of conditioned media was added into the loading chambers followed by incubation for 12 hours at 4 °C ...
-
Genome modularization reveals overlapped gene topology is necessary for efficient viral reproductionbioRxiv - Synthetic Biology 2020Quote: A 4 μL solution of decompressed or wild-type ϕX174 virions were applied to glow-discharged copper grids (carbon type B with formvar, 200 mesh (Ted Pella Inc., United States)) ...
-
bioRxiv - Developmental Biology 2019Quote: ... The samples were then fixed for 3 minutes using the Pelco Biowave (Ted Pella), followed by overnight fixation at 4°C ...
-
bioRxiv - Developmental Biology 2023Quote: ... 3×10 minutes and dehydrated using a Pelco BioWave Pro Microwave (Ted Pella, Inc.) as follows ...
-
bioRxiv - Biochemistry 2021Quote: ... protoplasts were immediately suspended in 2 ml of W1 buffer [58] and then dispensed onto 50 x 7 mm round bottom glass dishes (Ted Pella Inc, product number 14035-120). All expressions in protoplasts utilized the UBQ10 promoter ...
-
bioRxiv - Biophysics 2023Quote: ... a 3 µL drop was applied to carbon coated 400 mesh copper grids (Ted Pella) that were glow discharged at 15 mA for 1 min ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 mM calcium chloride in 0.1 M sodium cacodylate buffer pH 7.4 (Ted Pella Incorporated, 18851) for 5 minutes at 37 °C and then on ice for 1 hour ...
-
bioRxiv - Synthetic Biology 2021Quote: ... PDMS slab is punched with a diameter of 3 mm puncher (Harris Uni-Core, Ted Pella).
-
bioRxiv - Microbiology 2022Quote: ... 3 µl of each reaction were spotted onto EMS CF300-CU grids (Ted Pella, Redding, CA) for 2 min ...
-
bioRxiv - Molecular Biology 2022Quote: ... a 3 μL sample was spotted onto a freshly glow-discharged carbon-coated grid (Ted Pella), incubated for 2 min ...
-
bioRxiv - Biochemistry 2024Quote: ... 3 µl of sample was pipetted onto the grid and Grade 595 filter paper (Ted Pella) was used to blot the grid for 3 seconds ...
-
bioRxiv - Molecular Biology 2019Quote: 3 μL of sample was applied to plasma cleaned lacey carbon grids (Ted Pella, Inc., 300 mesh), followed by plunge-freezing using a Vitrobot Mark IV (FEI ...
-
bioRxiv - Physiology 2020Quote: ... The sections were collected as ribbons of 3-4 sections on a 75-mesh grid (Ted Pella). Every grid was then poststained with 3% uranyl acetate in water for 10 minutes and Reynold’s lead citrate for 2 minutes ...
-
bioRxiv - Cell Biology 2023Quote: ... 3 µl of the co-polymer was applied to a continuous carbon grid (Ted Pella, 300 mesh), it was stained three times for 10 s with drops of 1.5% uranyl acetate ...
-
bioRxiv - Cancer Biology 2022Quote: ... Tumor samples were individually minced using 3-4 passes of a McIllwain tissue chopper (Ted Pella 10180) set to chop 150 mm sections at 60% of the maximal chopping rate and 50% force ...
-
bioRxiv - Microbiology 2023Quote: ... The buffer was removed and samples stained with post-fixative for 3 hours (Osmium tetroxide, Ted Pella; Tannic Acid ...
-
bioRxiv - Cell Biology 2019Quote: Cell pellets (2-3 μl) were loaded onto copper membrane carriers (1mm x 0.5 mm; Ted Pella Inc.) and cryofixed using the EM PACT2 high pressure freezer (Leica) ...
-
bioRxiv - Biochemistry 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter paper (Ted Pella Inc.)) ...
-
bioRxiv - Immunology 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter papers (Ted Pella Inc.)) ...
-
bioRxiv - Biophysics 2020Quote: ... for a total of 41 datasets at 3 different locations on a waffle pattern grating replica grid (Ted Pella). The dose symmetric tilt scheme used was adapted from others (Hagen et al. ...
-
bioRxiv - Plant Biology 2022Quote: ... The grids were blotted for 2–3 s using a pair of filter papers (55 mm, Ted Pella Inc.) at 8°C with 100% humidity and flash-frozen in liquid ethane using an FEI Vitrobot Marked IV ...
-
bioRxiv - Physiology 2023Quote: ... followed by Rayon fine cloths and alumina pastes (9, 5, 3, 1, 0.5, 0.3, and 0.05 μm, Ted Pella, Inc.).
-
bioRxiv - Biochemistry 2023Quote: ... 3 μl of protein solution was applied onto a grid freshly glow-discharged in PELCO easiGlow system (Ted Pella). In-house graphene grids were prepared from Trivial Transfer Graphene sheets (ACS Material ...
-
bioRxiv - Biochemistry 2023Quote: ... the grids were blotted for 4.5-5 s (blot force of 3) using 595 filter paper (Ted Pella, Inc) before being immediately plunged into liquid ethane for vitrification ...
-
bioRxiv - Molecular Biology 2021Quote: ... then 3 μl samples (0.133 μM complexes) were place on copper grids (300 mesh formvar/carbon-coated) (Ted Pella, USA) that were hydrophilized by glow discharge (−20 mA ...