Labshake search
Citations for Ted Pella :
51 - 100 of 141 citations for 7 Chlorothieno 3 2 b pyridine since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2022Quote: ... and postfixed in 2% osmium tetroxide (Ted Pella Inc., Redding, CA) for 1 h at room temperature ...
-
bioRxiv - Molecular Biology 2019Quote: 3 μL of sample was applied to plasma cleaned lacey carbon grids (Ted Pella, Inc., 300 mesh), followed by plunge-freezing using a Vitrobot Mark IV (FEI ...
-
bioRxiv - Physiology 2020Quote: ... The sections were collected as ribbons of 3-4 sections on a 75-mesh grid (Ted Pella). Every grid was then poststained with 3% uranyl acetate in water for 10 minutes and Reynold’s lead citrate for 2 minutes ...
-
bioRxiv - Cell Biology 2023Quote: ... 3 µl of the co-polymer was applied to a continuous carbon grid (Ted Pella, 300 mesh), it was stained three times for 10 s with drops of 1.5% uranyl acetate ...
-
bioRxiv - Cancer Biology 2022Quote: ... Tumor samples were individually minced using 3-4 passes of a McIllwain tissue chopper (Ted Pella 10180) set to chop 150 mm sections at 60% of the maximal chopping rate and 50% force ...
-
bioRxiv - Microbiology 2023Quote: ... The buffer was removed and samples stained with post-fixative for 3 hours (Osmium tetroxide, Ted Pella; Tannic Acid ...
-
bioRxiv - Biophysics 2020Quote: ... 2 concentrations for the Δ and 2 for the auto strain – were mounted into a single glass-bottom dish (Ted Pella Wilco Dish, Cat. No. 14027-20) that was sealed with parafilm.
-
bioRxiv - Biochemistry 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter paper (Ted Pella Inc.)) ...
-
bioRxiv - Immunology 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter papers (Ted Pella Inc.)) ...
-
bioRxiv - Plant Biology 2020Quote: ... They were post-fixed in 2% (w/v) OsO4 (Ted Pella, 18451) in phosphate buffer (0.1 M ...
-
bioRxiv - Developmental Biology 2022Quote: ... Rectangles of silicon wafer approximately 2×4 cm (Ted Pella, No 16015) were cut from the round plate glow discharged ...
-
bioRxiv - Neuroscience 2023Quote: ... then fixed overnight with 2% EM grade glutaraldehyde (18426, Ted Pella Incorporated) in 0.15M sodium cacodylate buffer (SCB ...
-
bioRxiv - Biophysics 2020Quote: ... for a total of 41 datasets at 3 different locations on a waffle pattern grating replica grid (Ted Pella). The dose symmetric tilt scheme used was adapted from others (Hagen et al. ...
-
bioRxiv - Physiology 2023Quote: ... followed by Rayon fine cloths and alumina pastes (9, 5, 3, 1, 0.5, 0.3, and 0.05 μm, Ted Pella, Inc.).
-
bioRxiv - Biochemistry 2023Quote: ... the grids were blotted for 4.5-5 s (blot force of 3) using 595 filter paper (Ted Pella, Inc) before being immediately plunged into liquid ethane for vitrification ...
-
bioRxiv - Biochemistry 2023Quote: ... 3 μl of protein solution was applied onto a grid freshly glow-discharged in PELCO easiGlow system (Ted Pella). In-house graphene grids were prepared from Trivial Transfer Graphene sheets (ACS Material ...
-
bioRxiv - Cell Biology 2022Quote: ... and counterstained with 2% uranyl acetate and 3.5% lead citrate (19314; Ted Pella). The samples were imaged on a JEM-1400 electron microscope (JEOL ...
-
bioRxiv - Developmental Biology 2024Quote: ... oviducts were fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Ted Pella Inc., Redding, CA) in 100 mM cacodylate buffer ...
-
bioRxiv - Molecular Biology 2021Quote: ... then 3 μl samples (0.133 μM complexes) were place on copper grids (300 mesh formvar/carbon-coated) (Ted Pella, USA) that were hydrophilized by glow discharge (−20 mA ...
-
bioRxiv - Biophysics 2023Quote: ... aliquots (3 μl) of the protein sample were loaded onto glow-discharged (20 s, 15 mA; Pelco easiGlow, Ted Pella) Au grids (Quantifoil ...
-
bioRxiv - Bioengineering 2023Quote: ... 3 μL of purified samples were applied on glow-discharged (40 sec, 15 mA, PELCO easiGlow™, TED PELLA Inc.) holey carbon grids (Quantifoil Cu R1.2/1.3 ...
-
bioRxiv - Bioengineering 2019Quote: ... 2 µL of sample was added to Formvar/carbon 200 mesh grids (Ted Pella) that were rendered hydrophilic by glow discharging (Emitek K100X) ...
-
bioRxiv - Microbiology 2022Quote: ... samples were further fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Ted Pella Inc., Redding, CA) in 100 mM sodium cacodylate buffer ...
-
bioRxiv - Neuroscience 2023Quote: ... then 2 parts 100% propylene oxide per 1 part Eponate 12 resin (Ted Pella) for an 1 h ...
-
bioRxiv - Cell Biology 2019Quote: ... 95% for 10 min and 100% for 30 min with 3 changes) and infiltrated with Epon-Aradite (Ted Pella, Redding, CA) for 2 days (25% of Epon-Aradite and ethanol for 2h ...
-
bioRxiv - Microbiology 2021Quote: ... A small drop of the suspension (~3 μL) was deposited on a Formvar-coated 200 mesh Cu TEM grid (Ted Pella) and allowed to air-dry at ambient temperature ...
-
bioRxiv - Biochemistry 2022Quote: ... pH 6.5 was applied onto glow-discharged lacey carbon grids coated with 3-nm carbon film (Ted Pella, product code #01824). The grids were incubated for 60 s under 100% humidity in a Vitrobot Mark IV (FEI ...
-
bioRxiv - Cell Biology 2020Quote: ... Cells were then spun at 3,000rpm for 3 m in a microcentrifuge and resuspended in 1mL of 4% paraformaldehyde (Ted Pella, Inc.) in a 133mM sucrose in PBS solution ...
-
bioRxiv - Biochemistry 2022Quote: ... Negative-stain transmission EM samples were prepped by applying 3 μl of fibril solution to glow-discharged 300 mesh carbon-coated formvar support films mounted on Cu grids (Ted Pella). The samples were wicked ...
-
bioRxiv - Biochemistry 2023Quote: Tetrahedral nanoparticles were first diluted to 100 μg/mL in water prior to application of 3 μL of sample onto freshly glow-discharged 400-mesh copper grids (Ted Pella). Sample was incubated on the grid for 30 s before excess liquid blotted away with filter paper (Whatman) ...
-
bioRxiv - Biochemistry 2023Quote: 3 μl of purified sample of each F constructs was applied to a glow discharged 300 mesh copper grids (Ted Pella) coved with evaporated continuous carbon on top of collodion (Electron Microscope Science ...
-
bioRxiv - Microbiology 2024Quote: ... Infected cells were washed 3 times with PBS before fixing in 1.5 ml of 2.5% electron microscopy-grade glutaraldehyde (Ted Pella, Redding, CA) in 0.1 M sodium cacodylate buffer (pH 7.4 ...
-
bioRxiv - Developmental Biology 2020Quote: Xenopus embryos were fixed in 2%formaldehyde+0.5% glutaraldehyde (Ted Pella Inc., 18505 and 18426). Fixed embryos were washed with 0.1 M sodium cacodylate buffer and treated with 0.1% Millipore-filtered cacodylate buffered tannic acid ...
-
bioRxiv - Biophysics 2024Quote: ... samples were treated with 2% osmium tetroxide in 0.5 M sodium cacodylate buffer (Ted Pella), stained with uranyl acetate ...
-
bioRxiv - Cell Biology 2020Quote: A 3 μl drop of the Nsp1–40S complex was applied to glow-discharged copper grids with lacey carbon support and a 3 nm continuous carbon film (Ted Pella, Inc). The grids were blotted for 4 s in 100% humidity at 4 °C ...
-
bioRxiv - Immunology 2022Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 μL of a 0.7 mg/ml Omicron Spike mixed with 0.16 mg/mL each of P5C3 and P2G3 Fab fragments (Final 3.2 uM Omicron Spike:1.5 uM P5C3:1.5 uM P2G3 ...
-
bioRxiv - Biophysics 2022Quote: ... a drop of 3 μl cell suspension was loaded on a glow-discharged (using a PELCO easiGlow Glow Discharger, Ted Pella Inc) grid (200 mesh gold 1.2/1.3 ...
-
bioRxiv - Genetics 2022Quote: ... and gently flattened with a large book for 3 minutes.Coverslips were sealed using clear nail polish (Ted Pella, Inc., Fisher Cat# NC1849418). Imaging was performed on a Nikon Eclipse Ti inverted spinning disk confocal microscope using a 100X 1.49 NA oil immersion objective lens ...
-
bioRxiv - Immunology 2023Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 µL of a sample containing 14 µM of the corresponding Spike and 25 µM ACE-Fc was applied to the glow-discharged grids ...
-
bioRxiv - Immunology 2023Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 µL of a sample containing 9 µM Omicron BA.1 and 16 µM mACE-Fc was applied to the glow-discharged grids ...
-
bioRxiv - Immunology 2022Quote: ... was performed by applying a drop (3 μl) of sample to a glow-discharged TEM grid (carbon supported film on 300 mesh Cu grids, Ted Pella, Ltd). After 30 sec the excess liquid was blotted ...
-
bioRxiv - Immunology 2023Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 μL of a 0.35 mg/ml protein sample was applied to the glow-discharged grids ...
-
bioRxiv - Immunology 2023Quote: Cell monolayers were washed with PBS 1x and fixed in situ for 1 hour at room temperature (RT) with 3 % glutaraldehyde (EM Grade, Ted Pella INC) in PBS 1x ...
-
bioRxiv - Biophysics 2024Quote: 3-5 µl of purified kinetochores were taken directly from elutions and deposited on glow discharged (Pelco easiGlow, Ted Pella, Redding CA) 400 mesh electron microscopy grids (01754-F F/C ...
-
bioRxiv - Microbiology 2019Quote: ... microdrops of protein aggregate suspensions were deposited for 2 min on silicon wafers (Ted Pella Inc.), air-dried and observed in a nearly native state under a field emission scanning electron microscope (FESEM ...
-
bioRxiv - Biophysics 2022Quote: ... to glow discharge Lacey carbon cryoEM grids with a 2 nm continuous carbon film (Ted Pella) for 45 seconds ...
-
bioRxiv - Microbiology 2022Quote: ... Samples were washed in sodium cacodylate buffer and postfixed in 2% osmium tetroxide (Ted Pella, Inc) 1 hour at room temperature ...
-
bioRxiv - Microbiology 2022Quote: ... parasites were fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Ted Pella Inc., Redding, CA or other source) in 100 mM sodium cacodylate buffer ...
-
bioRxiv - Molecular Biology 2023Quote: 2 nm thick carbon films supported on Quantifoil holey carbon grids (Ted Pella 668-300-Cu) were imaged with a room-temperature specimen holder in order to make quantitative measurements of the microscope’s CTF envelope as a function of the diameter of the electron beam hole in the dummies ...
-
bioRxiv - Plant Biology 2021Quote: ... Coverslips were mounted on 13mm aluminum stubs using double-sided carbon adhesive and sputter coated with 3 nm of gold-palladium alloy (60 Au:40 Pd, Cressington Sputter Coater 208HR, model 8000-220, Ted Pella, Redding, CA). Images were taken using a Zeiss Supra 25 FESEM operating at 5 kV ...