Labshake search
Citations for Ted Pella :
1 - 50 of 239 citations for 7 CHLORO 3 PHENYL PYRAZOLO 1 5 A PYRIMIDINE since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cancer Biology 2019Quote: ... the samples described above can also be screened via traditional SEM imaging by mounting a semi-thin 250-350 nm section of the 1 mm2 block faces onto a glow discharged 5×7 mm silicon chip (Ted Pella, Inc., cat# 16007). For the silicon chip surface activation ...
-
bioRxiv - Physiology 2023Quote: ... followed by Rayon fine cloths and alumina pastes (9, 5, 3, 1, 0.5, 0.3, and 0.05 μm, Ted Pella, Inc.).
-
bioRxiv - Biochemistry 2023Quote: ... a few μl of these suspensions were poured on the surface of a 5×7 mm silicon chip (Ted Pella Inc, Redding, CA, USA). After evaporation of the solvent ...
-
bioRxiv - Microbiology 2023Quote: ... 5 minutes in 1:1 absolute ethanol (Thermo) to hexamethyldisilazane (HMDS, Ted Pella), and 5 minutes in 100% HMDS ...
-
bioRxiv - Biochemistry 2023Quote: ... the grids were blotted for 4.5-5 s (blot force of 3) using 595 filter paper (Ted Pella, Inc) before being immediately plunged into liquid ethane for vitrification ...
-
bioRxiv - Biophysics 2024Quote: 3-5 µl of purified kinetochores were taken directly from elutions and deposited on glow discharged (Pelco easiGlow, Ted Pella, Redding CA) 400 mesh electron microscopy grids (01754-F F/C ...
-
bioRxiv - Cell Biology 2022Quote: ... Double side Carbon conductive tape (Cat# 16084-7, Ted Pella Inc) was used to immobilize the wafer on an aluminum SEM sample holder ...
-
bioRxiv - Microbiology 2020Quote: ... at a 5:1 mole ratio to a colloidal suspension of 5 nm diameter citrate-stabilized gold nanoparticles (AuNP) (Ted Pella). The suspension was vortexed briefly and then incubated at RT for 1 h on a flat-bottom shaker ...
-
bioRxiv - Biochemistry 2020Quote: ... Incubated bacteria (5 μl) were dispersed on 5×5 mm silicon wafers (Ted Pella, USA) that had been prewashed with ethanol ...
-
bioRxiv - Neuroscience 2020Quote: ... and stained for 60-90 sec with 5 μL of 1% uranyl acetate (Ted Pella, Inc.). All samples were imaged at an accelerating voltage of 80 kV in a JEOL JSM 1400 Plus (JOEL).
-
bioRxiv - Developmental Biology 2021Quote: ... glass slides (4’’ by 3’’; Ted Pella) and the feature-side of the PDMS slabs were thoroughly cleaned with tape to remove any dust particles ...
-
bioRxiv - Immunology 2023Quote: Cell monolayers were washed with PBS 1x and fixed in situ for 1 hour at room temperature (RT) with 3 % glutaraldehyde (EM Grade, Ted Pella INC) in PBS 1x ...
-
bioRxiv - Biophysics 2023Quote: ... The samples with treated RAW264.7 cells were washed with 0.1M HEPES buffer (pH 7.4) and fixed with 2.5 % of glutaraldehyde (Ted Pella, Inc) in the same buffer for 2 hours ...
-
bioRxiv - Microbiology 2021Quote: ... using carbon tape (16084-3, TED PELLA, Redding, CA). To increase conduction ...
-
bioRxiv - Neuroscience 2020Quote: ... The specimens were then centrifuged onto the surface of 5 x 5 mm2 silicon chips (Ted Pella), fixed ...
-
Self-organization of embryonic stem cells into a reproducible embryo model through epigenome editingbioRxiv - Developmental Biology 2024Quote: ... The lid was put on the 8 well chamber slide and sealed with clear nail polish (Ted Pella,114-7). Slides were stored overnight at 4°C to let the CPEMs settle before imaging ...
-
bioRxiv - Cell Biology 2019Quote: ... Samples for electron tomography included 0.5 µl of 5-nm fiducial gold (Ted Pella Inc. Cat. 82150-5) applied to the sample drop ...
-
bioRxiv - Molecular Biology 2024Quote: ... #5 Dumont fine forceps (Ted Pella, Inc.) were placed between the Drosophila head and thorax to remove the head from the remainder of the body ...
-
bioRxiv - Biochemistry 2020Quote: Cryo-EM grids were prepared by applying 3 μl protein samples to glow-discharged (PELCO easiGlow™ Ted Pella Inc., at 15 mA for 1 minute) holey carbon grids (Quantifoil R 1.2/1.3 ...
-
bioRxiv - Biochemistry 2022Quote: Cryo-EM grids were prepared by applying 3 µl protein samples to glow-discharged (PELCO easiGlow™ Ted Pella Inc., at 15 mA for 1 minute) holey carbon grids (Quantifoil R 1.2/1.3 ...
-
bioRxiv - Neuroscience 2021Quote: ... for 1 minute to equilibrate before microwave-based antigen retrieval in a PELCO BioWave Pro microwave (550W for 5 minutes; Ted Pella, Redding, California). Following antigen retrieval ...
-
bioRxiv - Neuroscience 2021Quote: ... using #5 Dumont fine forceps (Ted Pella, Inc.), for each dissection a Drosophila head was isolated in PBS (often supplemented with 0.1% Triton X-100) ...
-
bioRxiv - Bioengineering 2023Quote: 20 µL of the sample were drop casted several times until a thin film was formed on top of a 5×5 mm Si wafer (Ted Pella). A Phoibos 150 (SPECS ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 pyruvate) using vibratome (Vibratome 1000 plus, Ted Pella Inc., CA, USA). Slices were transferred and kept for 1 hour at room temperature in artificial cerebrospinal fluid (ACSF ...
-
bioRxiv - Cancer Biology 2022Quote: ... which were prepared by biopsy punch (3 mm in diameter, Ted Pella, Sweden). 20 μl of conditioned media was added into the loading chambers followed by incubation for 12 hours at 4 °C ...
-
bioRxiv - Developmental Biology 2019Quote: ... The samples were then fixed for 3 minutes using the Pelco Biowave (Ted Pella), followed by overnight fixation at 4°C ...
-
bioRxiv - Developmental Biology 2023Quote: ... 3×10 minutes and dehydrated using a Pelco BioWave Pro Microwave (Ted Pella, Inc.) as follows ...
-
bioRxiv - Biochemistry 2021Quote: ... protoplasts were immediately suspended in 2 ml of W1 buffer [58] and then dispensed onto 50 x 7 mm round bottom glass dishes (Ted Pella Inc, product number 14035-120). All expressions in protoplasts utilized the UBQ10 promoter ...
-
bioRxiv - Molecular Biology 2024Quote: ... brains were dissected using #5 Dumont fine forceps (Ted Pella, Inc.) in PBS supplemented with 0.1% Triton X-100 (0.1% PBS-T) ...
-
bioRxiv - Biophysics 2023Quote: ... a 3 µL drop was applied to carbon coated 400 mesh copper grids (Ted Pella) that were glow discharged at 15 mA for 1 min ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 mM calcium chloride in 0.1 M sodium cacodylate buffer pH 7.4 (Ted Pella Incorporated, 18851) for 5 minutes at 37 °C and then on ice for 1 hour ...
-
bioRxiv - Synthetic Biology 2021Quote: ... PDMS slab is punched with a diameter of 3 mm puncher (Harris Uni-Core, Ted Pella).
-
bioRxiv - Microbiology 2022Quote: ... 3 µl of each reaction were spotted onto EMS CF300-CU grids (Ted Pella, Redding, CA) for 2 min ...
-
bioRxiv - Molecular Biology 2022Quote: ... a 3 μL sample was spotted onto a freshly glow-discharged carbon-coated grid (Ted Pella), incubated for 2 min ...
-
bioRxiv - Biochemistry 2024Quote: ... 3 µl of sample was pipetted onto the grid and Grade 595 filter paper (Ted Pella) was used to blot the grid for 3 seconds ...
-
bioRxiv - Molecular Biology 2019Quote: 3 μL of sample was applied to plasma cleaned lacey carbon grids (Ted Pella, Inc., 300 mesh), followed by plunge-freezing using a Vitrobot Mark IV (FEI ...
-
bioRxiv - Physiology 2020Quote: ... The sections were collected as ribbons of 3-4 sections on a 75-mesh grid (Ted Pella). Every grid was then poststained with 3% uranyl acetate in water for 10 minutes and Reynold’s lead citrate for 2 minutes ...
-
bioRxiv - Cell Biology 2023Quote: ... 3 µl of the co-polymer was applied to a continuous carbon grid (Ted Pella, 300 mesh), it was stained three times for 10 s with drops of 1.5% uranyl acetate ...
-
bioRxiv - Cancer Biology 2022Quote: ... Tumor samples were individually minced using 3-4 passes of a McIllwain tissue chopper (Ted Pella 10180) set to chop 150 mm sections at 60% of the maximal chopping rate and 50% force ...
-
bioRxiv - Microbiology 2023Quote: ... The buffer was removed and samples stained with post-fixative for 3 hours (Osmium tetroxide, Ted Pella; Tannic Acid ...
-
bioRxiv - Cell Biology 2019Quote: Cell pellets (2-3 μl) were loaded onto copper membrane carriers (1mm x 0.5 mm; Ted Pella Inc.) and cryofixed using the EM PACT2 high pressure freezer (Leica) ...
-
bioRxiv - Biochemistry 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter paper (Ted Pella Inc.)) ...
-
bioRxiv - Immunology 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter papers (Ted Pella Inc.)) ...
-
bioRxiv - Biophysics 2019Quote: Samples (∼5 µl) were applied on glow-discharged lacey grids (Ted Pella, CA, USA), followed by blotting and vitrification of the grids using Vitrobot(tm ...
-
bioRxiv - Biophysics 2023Quote: ... 5 μL samples containing complex coacervates was loaded onto the grids (Ted Pella, Inc.). The samples on grids were negatively stained with uranyl acetate (UA) ...
-
bioRxiv - Biophysics 2020Quote: ... for a total of 41 datasets at 3 different locations on a waffle pattern grating replica grid (Ted Pella). The dose symmetric tilt scheme used was adapted from others (Hagen et al. ...
-
bioRxiv - Plant Biology 2022Quote: ... The grids were blotted for 2–3 s using a pair of filter papers (55 mm, Ted Pella Inc.) at 8°C with 100% humidity and flash-frozen in liquid ethane using an FEI Vitrobot Marked IV ...
-
bioRxiv - Biochemistry 2023Quote: ... 3 μl of protein solution was applied onto a grid freshly glow-discharged in PELCO easiGlow system (Ted Pella). In-house graphene grids were prepared from Trivial Transfer Graphene sheets (ACS Material ...
-
bioRxiv - Biophysics 2020Quote: ... Two microliters of sample (5 nM) were deposited onto freshly cleaved mica (Ted Pella Inc.), and 0.5 to 1.0 μl of NiCl2 at a concentration of 100 mM were added to the samples to fix the origami nanostructures on the mica surface ...
-
bioRxiv - Bioengineering 2022Quote: ... 5 μL of sample was applied to a 400-mesh carbon grid (Ted Pella, Inc.) that had been glow discharged for 15 seconds ...