Labshake search
Citations for Ted Pella :
1 - 50 of 181 citations for 7 Benzyloxy 3 4 dihydro 1H naphthalen 2 one since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Developmental Biology 2021Quote: ... glass slides (4’’ by 3’’; Ted Pella) and the feature-side of the PDMS slabs were thoroughly cleaned with tape to remove any dust particles ...
-
bioRxiv - Developmental Biology 2022Quote: ... Rectangles of silicon wafer approximately 2×4 cm (Ted Pella, No 16015) were cut from the round plate glow discharged ...
-
bioRxiv - Neuroscience 2022Quote: ... post-fixed for 2 h in 4% PFA at 4°C and immediately sectioned in coronal slices (50 μm) using a vibratome (Ted Pella). Coronal sections were incubated with 10 mM sodium citrate (pH 6.0 ...
-
bioRxiv - Physiology 2020Quote: ... The sections were collected as ribbons of 3-4 sections on a 75-mesh grid (Ted Pella). Every grid was then poststained with 3% uranyl acetate in water for 10 minutes and Reynold’s lead citrate for 2 minutes ...
-
bioRxiv - Cancer Biology 2022Quote: ... Tumor samples were individually minced using 3-4 passes of a McIllwain tissue chopper (Ted Pella 10180) set to chop 150 mm sections at 60% of the maximal chopping rate and 50% force ...
-
bioRxiv - Biochemistry 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter paper (Ted Pella Inc.)) ...
-
bioRxiv - Immunology 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter papers (Ted Pella Inc.)) ...
-
bioRxiv - Cell Biology 2019Quote: Cell pellets (2-3 μl) were loaded onto copper membrane carriers (1mm x 0.5 mm; Ted Pella Inc.) and cryofixed using the EM PACT2 high pressure freezer (Leica) ...
-
bioRxiv - Biochemistry 2021Quote: ... protoplasts were immediately suspended in 2 ml of W1 buffer [58] and then dispensed onto 50 x 7 mm round bottom glass dishes (Ted Pella Inc, product number 14035-120). All expressions in protoplasts utilized the UBQ10 promoter ...
-
bioRxiv - Cell Biology 2020Quote: ... Cells were then spun at 3,000rpm for 3 m in a microcentrifuge and resuspended in 1mL of 4% paraformaldehyde (Ted Pella, Inc.) in a 133mM sucrose in PBS solution ...
-
bioRxiv - Plant Biology 2022Quote: ... The grids were blotted for 2–3 s using a pair of filter papers (55 mm, Ted Pella Inc.) at 8°C with 100% humidity and flash-frozen in liquid ethane using an FEI Vitrobot Marked IV ...
-
bioRxiv - Neuroscience 2023Quote: ... Samples were immersed in Karnovsky’s fix (2% glutaraldehyde, 4% PFA in 0.1M sodium cacodylate, pH 7.4) and microwaved (PELCO BioWave processing - Ted Pella) for at 100 W for 1 min ...
-
bioRxiv - Biophysics 2021Quote: ... and 3 µL of sample were deposited and incubated for 2 min on freshly cleaved bare mica V1 (Ted Pella Inc.), after which was rinsed with Milli-Q water ...
-
bioRxiv - Cell Biology 2022Quote: ... Double side Carbon conductive tape (Cat# 16084-7, Ted Pella Inc) was used to immobilize the wafer on an aluminum SEM sample holder ...
-
bioRxiv - Plant Biology 2023Quote: ... The resin was then polymerized at 4°C under UV light for 3 days using a PELCO UVC3 Cryo Chamber (Ted Pella, Redding, CA, USA). Serial semi-thin sections (0.25 μm thick ...
-
bioRxiv - Genetics 2022Quote: ... embryos obtained from bleached adults were spun down at 1,000 x g for 2 minutes in a 1.5 mL Eppendorf tube and resuspended in 500 µL of fixative solution containing 50% methanol (Fisher Chemical, A412SK-4) and 2% para-formaldehyde (Ted Pella, Inc., Cat # 18505) in 1X PBS buffer ...
-
bioRxiv - Biophysics 2023Quote: ... The samples with treated RAW264.7 cells were washed with 0.1M HEPES buffer (pH 7.4) and fixed with 2.5 % of glutaraldehyde (Ted Pella, Inc) in the same buffer for 2 hours ...
-
bioRxiv - Microbiology 2021Quote: ... using carbon tape (16084-3, TED PELLA, Redding, CA). To increase conduction ...
-
bioRxiv - Neuroscience 2020Quote: ... brains were placed in 2 x 2 x 2 inch plastic blocks filled with cryo-embedding compound (Ted Pella Inc., Redding, CA). Brains were sectioned coronally at 40 microns and sections were stored in cryoprotectant solution (30 % sucrose ...
-
Self-organization of embryonic stem cells into a reproducible embryo model through epigenome editingbioRxiv - Developmental Biology 2024Quote: ... The lid was put on the 8 well chamber slide and sealed with clear nail polish (Ted Pella,114-7). Slides were stored overnight at 4°C to let the CPEMs settle before imaging ...
-
bioRxiv - Cell Biology 2021Quote: Cells were fixed with 4% paraformaldehyde (Ted Pella) in 100 mM sucrose for 20 min ...
-
bioRxiv - Neuroscience 2024Quote: ... and 4% Paraformaldehyde (PFA) (Ted Pella, Inc., USA), consecutively for immunostaining experiments ...
-
bioRxiv - Neuroscience 2024Quote: ... and 4% Paraformaldehyde (PFA) (Ted Pella, Inc., USA), consecutively for immunostaining experiments ...
-
bioRxiv - Cell Biology 2021Quote: ... and SEC fractions were fixed with an equal volume of 2x Karnovsky fixative (0.2M Na cacodylate, 4% paraformaldehyde and 4% glutaraldehyde)(Ted Pella Inc.), mixed gently and incubated on ice for 30 min ...
-
bioRxiv - Biochemistry 2022Quote: ... 100 mM glycine to glow-discharged C-flat CF-2/2 C-T-grids (TED PELLA).
-
bioRxiv - Cell Biology 2020Quote: ... 10 minutes in 4% paraformaldehyde (Ted Pella, Redding, CA) in 1x PBS ...
-
bioRxiv - Systems Biology 2021Quote: ... tissue sections were fixed in 4% paraformaldehyde (Ted Pella) for 10 min ...
-
bioRxiv - Pathology 2020Quote: Pancreatic lobules were fixed in 4% paraformaldehyde (Ted Pella) overnight ...
-
bioRxiv - Microbiology 2020Quote: ... Osmium Tetroxide (OsO4) (4%) and Glutaraldehyde from Ted Pella Inc ...
-
bioRxiv - Developmental Biology 2022Quote: ... and one side of the thorax was punctured using a blunt 0.005 inch diameter tungsten needle (Ted Pella #27-11). Flies were then returned to vials ...
-
bioRxiv - Molecular Biology 2021Quote: ... Grids were glow-discharged at −20 or −25 mA for one minute using a PELCO easiGlow glow discharger (Ted Pella). 3-4 μl of samples were applied onto grids using a Vitrobot (Thermo Fisher) ...
-
bioRxiv - Biophysics 2023Quote: ... or C2AV67D was spotted for one minute on 200 mesh nickel grids coated in formvar/carbon (Ted Pella, Redding, CA). The sample was blotted with filter paper ...
-
bioRxiv - Biochemistry 2023Quote: ... the chip was laid on one side of a bi-adhesive plastic disc coated with conductive material (Ted Pella Inc.) which was in turn attached to the surface of a standard pin stub mount for SEM ...
-
bioRxiv - Microbiology 2024Quote: ... The still moist grids were then touched to one drop of NanoW tungsten stain (Ted Pella; product #09S432, lot #14702), the excess was wicked off immediately with filter paper before repeating this step on a second drop of Nano-W ...
-
bioRxiv - Bioengineering 2021Quote: We plasma treated gold Quantifoil R 2/2 EM grids (657-200-AU, Ted Pella, Redding, CA) for 10 sec at 30 W (PE-50 ...
-
bioRxiv - Cell Biology 2019Quote: ... and fixed for 15 minutes with 4% formaldehyde (Ted Pella). After two PBS washes ...
-
bioRxiv - Microbiology 2020Quote: ... with pre-warmed 4% paraformaldehyde (PFA) (Ted Pella Inc., 18505) for 10 min at RT ...
-
bioRxiv - Cell Biology 2023Quote: ... lungs were fixed again using 4% PFA (Ted Pella, #18505) for 2 hours and then processed for embedding following standard procedures ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 pyruvate) using vibratome (Vibratome 1000 plus, Ted Pella Inc., CA, USA). Slices were transferred and kept for 1 hour at room temperature in artificial cerebrospinal fluid (ACSF ...
-
bioRxiv - Cancer Biology 2019Quote: ... the samples described above can also be screened via traditional SEM imaging by mounting a semi-thin 250-350 nm section of the 1 mm2 block faces onto a glow discharged 5×7 mm silicon chip (Ted Pella, Inc., cat# 16007). For the silicon chip surface activation ...
-
bioRxiv - Biochemistry 2023Quote: ... a few μl of these suspensions were poured on the surface of a 5×7 mm silicon chip (Ted Pella Inc, Redding, CA, USA). After evaporation of the solvent ...
-
bioRxiv - Cancer Biology 2022Quote: ... which were prepared by biopsy punch (3 mm in diameter, Ted Pella, Sweden). 20 μl of conditioned media was added into the loading chambers followed by incubation for 12 hours at 4 °C ...
-
bioRxiv - Cell Biology 2020Quote: ... and embedded in JB-4 Plus resin (Ted Pella, Redding, CA). Sections 4 µm thick were cut on a Leica EMUC6 Ultramicrotome (Leica Microsystems ...
-
bioRxiv - Microbiology 2022Quote: ... We removed excess liquid with filter paper after 2 minutes and stained with 2% uranyl acetate (TED Pella Cat: 19481) for 1min ...
-
bioRxiv - Biophysics 2024Quote: ... grids (Quantifoil R1.2/1.3, Cu 200 mesh, 100 holey carbon films, 2 nm carbon support film; for images of DCVs: Ted Pella, Cu 400 mesh ...
-
bioRxiv - Pathology 2020Quote: ... a mixed solution of 2% formaldehyde (Ted Pella) and 2% glutaraldehyde (Electron Microscopy Sciences ...
-
bioRxiv - Immunology 2023Quote: ... fixed with 2% PFA (Ted Pella, Redding, CA), and washed twice with FACS buffer ...
-
bioRxiv - Developmental Biology 2019Quote: ... The samples were then fixed for 3 minutes using the Pelco Biowave (Ted Pella), followed by overnight fixation at 4°C ...
-
bioRxiv - Developmental Biology 2023Quote: ... 3×10 minutes and dehydrated using a Pelco BioWave Pro Microwave (Ted Pella, Inc.) as follows ...
-
bioRxiv - Developmental Biology 2021Quote: Freshly dissected third instar larval CNSs were fixed in 2% glutaraldehyde and 2% OsO4in 0.12 M sodium cacodylate (pH 7.4) by microwave (Ted Pella, BioWave Pro MW) as follows ...