Labshake search
Citations for Ted Pella :
1 - 50 of 313 citations for 7 BROMO 1 2 3 4 TETRAHYDROCYCLOPENTA B INDOLE since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Developmental Biology 2021Quote: ... glass slides (4’’ by 3’’; Ted Pella) and the feature-side of the PDMS slabs were thoroughly cleaned with tape to remove any dust particles ...
-
bioRxiv - Bioengineering 2020Quote: ... 3 µl of labeled EVs were added onto glow-discharged formvar-carbon type B coated electron microscopy grids (Ted Pella Inc) for 3 minutes ...
-
bioRxiv - Developmental Biology 2022Quote: ... Rectangles of silicon wafer approximately 2×4 cm (Ted Pella, No 16015) were cut from the round plate glow discharged ...
-
bioRxiv - Neuroscience 2022Quote: ... post-fixed for 2 h in 4% PFA at 4°C and immediately sectioned in coronal slices (50 μm) using a vibratome (Ted Pella). Coronal sections were incubated with 10 mM sodium citrate (pH 6.0 ...
-
bioRxiv - Physiology 2020Quote: ... The sections were collected as ribbons of 3-4 sections on a 75-mesh grid (Ted Pella). Every grid was then poststained with 3% uranyl acetate in water for 10 minutes and Reynold’s lead citrate for 2 minutes ...
-
bioRxiv - Cancer Biology 2022Quote: ... Tumor samples were individually minced using 3-4 passes of a McIllwain tissue chopper (Ted Pella 10180) set to chop 150 mm sections at 60% of the maximal chopping rate and 50% force ...
-
bioRxiv - Biochemistry 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter paper (Ted Pella Inc.)) ...
-
bioRxiv - Immunology 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter papers (Ted Pella Inc.)) ...
-
bioRxiv - Cell Biology 2019Quote: Cell pellets (2-3 μl) were loaded onto copper membrane carriers (1mm x 0.5 mm; Ted Pella Inc.) and cryofixed using the EM PACT2 high pressure freezer (Leica) ...
-
bioRxiv - Biochemistry 2021Quote: ... protoplasts were immediately suspended in 2 ml of W1 buffer [58] and then dispensed onto 50 x 7 mm round bottom glass dishes (Ted Pella Inc, product number 14035-120). All expressions in protoplasts utilized the UBQ10 promoter ...
-
bioRxiv - Cell Biology 2020Quote: ... Cells were then spun at 3,000rpm for 3 m in a microcentrifuge and resuspended in 1mL of 4% paraformaldehyde (Ted Pella, Inc.) in a 133mM sucrose in PBS solution ...
-
bioRxiv - Plant Biology 2022Quote: ... The grids were blotted for 2–3 s using a pair of filter papers (55 mm, Ted Pella Inc.) at 8°C with 100% humidity and flash-frozen in liquid ethane using an FEI Vitrobot Marked IV ...
-
bioRxiv - Microbiology 2021Quote: ... Phages (3.5 µL) were deposited and incubated for 1 min on TEM grids (Carbon Type-B 400 mesh, TED PELLA). Grids were washed thrice with 40 µL of MilliQ water and stained with 3.5 µL of 2% (w/v ...
-
bioRxiv - Neuroscience 2023Quote: ... Samples were immersed in Karnovsky’s fix (2% glutaraldehyde, 4% PFA in 0.1M sodium cacodylate, pH 7.4) and microwaved (PELCO BioWave processing - Ted Pella) for at 100 W for 1 min ...
-
bioRxiv - Biophysics 2021Quote: ... and 3 µL of sample were deposited and incubated for 2 min on freshly cleaved bare mica V1 (Ted Pella Inc.), after which was rinsed with Milli-Q water ...
-
bioRxiv - Cell Biology 2022Quote: ... Double side Carbon conductive tape (Cat# 16084-7, Ted Pella Inc) was used to immobilize the wafer on an aluminum SEM sample holder ...
-
bioRxiv - Plant Biology 2023Quote: ... The resin was then polymerized at 4°C under UV light for 3 days using a PELCO UVC3 Cryo Chamber (Ted Pella, Redding, CA, USA). Serial semi-thin sections (0.25 μm thick ...
-
bioRxiv - Cell Biology 2020Quote: ... placed individually into brass planchettes (Type A/B; Ted Pella, Inc.), and rapidly frozen with a HPM-010 High Pressure Freezing machine (BalTec/ABRA) ...
-
bioRxiv - Microbiology 2020Quote: ... deposited on Type-B carbon-coated copper grids (Ted Pella Inc.), were examined in a JEOL 2010-F HR-TEM (Jeol Ltd.) ...
-
bioRxiv - Biophysics 2023Quote: ... glow-discharged grids (Carbon Type-B, 400 mesh, Cu, Ted Pella) were floated on a 5 µL sample bead on parafilm for 1 minute ...
-
bioRxiv - Molecular Biology 2019Quote: ... cells (4 × 106) were cross-linked with 1% formaldehyde (Ted Pella Inc., Redding, CA) for 10 minutes at room temperature ...
-
bioRxiv - Cancer Biology 2019Quote: ... the samples described above can also be screened via traditional SEM imaging by mounting a semi-thin 250-350 nm section of the 1 mm2 block faces onto a glow discharged 5×7 mm silicon chip (Ted Pella, Inc., cat# 16007). For the silicon chip surface activation ...
-
bioRxiv - Cell Biology 2022Quote: ... Pellets were transferred to brass planchettes (type A/B; Ted Pella, Inc.) and ultra-rapidly frozen with a HPM-010 high-pressure freezing machine (Bal-Tec/ABRA) ...
-
bioRxiv - Neuroscience 2023Quote: ... Carbon-B grids (formvar carbon coated copper 400 mesh) from Ted Pella were used ...
-
bioRxiv - Neuroscience 2019Quote: ... Tissue was then allowed to pre-infiltrate 2 h in a 2:1 mix of propylene oxide and Eponate resin (Ted Pella, Redding, CA), then transferred into a 1:1 mix of propylene oxide and Eponate resin and allowed to infiltrate overnight on a gentle rotator ...
-
bioRxiv - Neuroscience 2023Quote: ... then 2 parts 100% propylene oxide per 1 part Eponate 12 resin (Ted Pella) for an 1 h ...
-
bioRxiv - Genetics 2022Quote: ... embryos obtained from bleached adults were spun down at 1,000 x g for 2 minutes in a 1.5 mL Eppendorf tube and resuspended in 500 µL of fixative solution containing 50% methanol (Fisher Chemical, A412SK-4) and 2% para-formaldehyde (Ted Pella, Inc., Cat # 18505) in 1X PBS buffer ...
-
bioRxiv - Cancer Biology 2023Quote: ... dropped onto a TEM grid (Ted Pella Inc, Carbon Type-B, 200 mesh, Copper), allowed to dry ...
-
bioRxiv - Microbiology 2021Quote: ... Membranes were air dried and mounted with a 4:1 mixture of Citifluor™ (Ted Pella, Inc.) and Vectashield® (Vector Laboratories Inc. ...
-
bioRxiv - Physiology 2023Quote: ... followed by Rayon fine cloths and alumina pastes (9, 5, 3, 1, 0.5, 0.3, and 0.05 μm, Ted Pella, Inc.).
-
bioRxiv - Cell Biology 2020Quote: ... Copper coated carbon grids were purchased from Ted Pella (01814F, carbon type-B, 400 mesh, Cu) DMEM advanced F12 media (12634010) ...
-
bioRxiv - Immunology 2022Quote: Purified H10ssF was applied to glow discharged Quantifoil R 2/1 300 mesh grids (Ted Pella, Redding) at a concentration of 1 mg ml-1 ...
-
bioRxiv - Genomics 2023Quote: ... washed three times with 0.1 M PBS at 4 °C and then fixed with 1% osmium tetroxide (Ted Pella, USA) in PBS for 1.5 h ...
-
bioRxiv - Microbiology 2023Quote: ... coverslips were washed once with PBS and fixed in 4% paraformaldehyde (Ted Pella Inc., 18505, diluted in 1 x PBS) for 10 min at room temperature ...
-
bioRxiv - Immunology 2023Quote: Cell monolayers were washed with PBS 1x and fixed in situ for 1 hour at room temperature (RT) with 3 % glutaraldehyde (EM Grade, Ted Pella INC) in PBS 1x ...
-
bioRxiv - Biophysics 2023Quote: ... The samples with treated RAW264.7 cells were washed with 0.1M HEPES buffer (pH 7.4) and fixed with 2.5 % of glutaraldehyde (Ted Pella, Inc) in the same buffer for 2 hours ...
-
bioRxiv - Microbiology 2021Quote: ... using carbon tape (16084-3, TED PELLA, Redding, CA). To increase conduction ...
-
bioRxiv - Neuroscience 2020Quote: ... brains were placed in 2 x 2 x 2 inch plastic blocks filled with cryo-embedding compound (Ted Pella Inc., Redding, CA). Brains were sectioned coronally at 40 microns and sections were stored in cryoprotectant solution (30 % sucrose ...
-
bioRxiv - Cancer Biology 2019Quote: ... The NPs were supported in a copper mesh covered with carbon (Support Films, Carbon Type-B, Ted Pella, inc.). The observations were performed with a TEM HT7700 (Hitashi ...
-
Self-organization of embryonic stem cells into a reproducible embryo model through epigenome editingbioRxiv - Developmental Biology 2024Quote: ... The lid was put on the 8 well chamber slide and sealed with clear nail polish (Ted Pella,114-7). Slides were stored overnight at 4°C to let the CPEMs settle before imaging ...
-
bioRxiv - Cell Biology 2021Quote: Cells were fixed with 4% paraformaldehyde (Ted Pella) in 100 mM sucrose for 20 min ...
-
bioRxiv - Neuroscience 2024Quote: ... and 4% Paraformaldehyde (PFA) (Ted Pella, Inc., USA), consecutively for immunostaining experiments ...
-
bioRxiv - Neuroscience 2024Quote: ... and 4% Paraformaldehyde (PFA) (Ted Pella, Inc., USA), consecutively for immunostaining experiments ...
-
bioRxiv - Biochemistry 2021Quote: ... Vitrified samples of S-protein constructs with and without ACE2 were prepared by first glow discharging Quantifoil R1.2/1.3 300 mesh holey carbon copper grids for 1 minute using a Pelco easiGlow glow discharge unit (Ted Pella) and then applying 1.8 μL of protein suspension to the surface of the grid ...
-
bioRxiv - Cell Biology 2021Quote: ... and SEC fractions were fixed with an equal volume of 2x Karnovsky fixative (0.2M Na cacodylate, 4% paraformaldehyde and 4% glutaraldehyde)(Ted Pella Inc.), mixed gently and incubated on ice for 30 min ...
-
bioRxiv - Bioengineering 2019Quote: ... samples were sandwiched between two carriers (200 μm brass planchet, Type B freezer hats, Ted Pella, Inc., Redding, CA, USA), filled with 1-hexadecane (Sigma-Aldrich ...
-
bioRxiv - Biochemistry 2020Quote: Cryo-EM grids were prepared by applying 3 μl protein samples to glow-discharged (PELCO easiGlow™ Ted Pella Inc., at 15 mA for 1 minute) holey carbon grids (Quantifoil R 1.2/1.3 ...
-
bioRxiv - Biochemistry 2022Quote: Cryo-EM grids were prepared by applying 3 µl protein samples to glow-discharged (PELCO easiGlow™ Ted Pella Inc., at 15 mA for 1 minute) holey carbon grids (Quantifoil R 1.2/1.3 ...
-
bioRxiv - Biochemistry 2022Quote: ... 100 mM glycine to glow-discharged C-flat CF-2/2 C-T-grids (TED PELLA).
-
bioRxiv - Cell Biology 2020Quote: ... 10 minutes in 4% paraformaldehyde (Ted Pella, Redding, CA) in 1x PBS ...