Labshake search
Citations for Ted Pella :
1 - 50 of 304 citations for 7 AMINO 2 TERT BUTOXYCARBONYL 1 2 3 4 TETRAHYDROISOQUINOLINE 3 CARBOXYLIC ACID since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Developmental Biology 2021Quote: ... glass slides (4’’ by 3’’; Ted Pella) and the feature-side of the PDMS slabs were thoroughly cleaned with tape to remove any dust particles ...
-
bioRxiv - Cell Biology 2019Quote: Cell pellets (2-3 μl) were loaded onto copper membrane carriers (1mm x 0.5 mm; Ted Pella Inc.) and cryofixed using the EM PACT2 high pressure freezer (Leica) ...
-
bioRxiv - Plant Biology 2022Quote: ... The grids were blotted for 2–3 s using a pair of filter papers (55 mm, Ted Pella Inc.) at 8°C with 100% humidity and flash-frozen in liquid ethane using an FEI Vitrobot Marked IV ...
-
bioRxiv - Biophysics 2021Quote: ... and 3 µL of sample were deposited and incubated for 2 min on freshly cleaved bare mica V1 (Ted Pella Inc.), after which was rinsed with Milli-Q water ...
-
bioRxiv - Developmental Biology 2022Quote: ... Rectangles of silicon wafer approximately 2×4 cm (Ted Pella, No 16015) were cut from the round plate glow discharged ...
-
bioRxiv - Physiology 2020Quote: ... The sections were collected as ribbons of 3-4 sections on a 75-mesh grid (Ted Pella). Every grid was then poststained with 3% uranyl acetate in water for 10 minutes and Reynold’s lead citrate for 2 minutes ...
-
bioRxiv - Cancer Biology 2022Quote: ... Tumor samples were individually minced using 3-4 passes of a McIllwain tissue chopper (Ted Pella 10180) set to chop 150 mm sections at 60% of the maximal chopping rate and 50% force ...
-
bioRxiv - Biochemistry 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter paper (Ted Pella Inc.)) ...
-
bioRxiv - Immunology 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter papers (Ted Pella Inc.)) ...
-
bioRxiv - Neuroscience 2022Quote: ... post-fixed for 2 h in 4% PFA at 4°C and immediately sectioned in coronal slices (50 μm) using a vibratome (Ted Pella). Coronal sections were incubated with 10 mM sodium citrate (pH 6.0 ...
-
bioRxiv - Cell Biology 2020Quote: ... Cells were then spun at 3,000rpm for 3 m in a microcentrifuge and resuspended in 1mL of 4% paraformaldehyde (Ted Pella, Inc.) in a 133mM sucrose in PBS solution ...
-
bioRxiv - Microbiology 2021Quote: ... using carbon tape (16084-3, TED PELLA, Redding, CA). To increase conduction ...
-
bioRxiv - Neuroscience 2020Quote: ... brains were placed in 2 x 2 x 2 inch plastic blocks filled with cryo-embedding compound (Ted Pella Inc., Redding, CA). Brains were sectioned coronally at 40 microns and sections were stored in cryoprotectant solution (30 % sucrose ...
-
bioRxiv - Neuroscience 2019Quote: ... Tissue was then allowed to pre-infiltrate 2 h in a 2:1 mix of propylene oxide and Eponate resin (Ted Pella, Redding, CA), then transferred into a 1:1 mix of propylene oxide and Eponate resin and allowed to infiltrate overnight on a gentle rotator ...
-
bioRxiv - Neuroscience 2023Quote: ... Samples were immersed in Karnovsky’s fix (2% glutaraldehyde, 4% PFA in 0.1M sodium cacodylate, pH 7.4) and microwaved (PELCO BioWave processing - Ted Pella) for at 100 W for 1 min ...
-
bioRxiv - Plant Biology 2023Quote: ... The resin was then polymerized at 4°C under UV light for 3 days using a PELCO UVC3 Cryo Chamber (Ted Pella, Redding, CA, USA). Serial semi-thin sections (0.25 μm thick ...
-
bioRxiv - Biochemistry 2022Quote: ... 100 mM glycine to glow-discharged C-flat CF-2/2 C-T-grids (TED PELLA).
-
bioRxiv - Biochemistry 2021Quote: ... protoplasts were immediately suspended in 2 ml of W1 buffer [58] and then dispensed onto 50 x 7 mm round bottom glass dishes (Ted Pella Inc, product number 14035-120). All expressions in protoplasts utilized the UBQ10 promoter ...
-
bioRxiv - Physiology 2023Quote: ... followed by Rayon fine cloths and alumina pastes (9, 5, 3, 1, 0.5, 0.3, and 0.05 μm, Ted Pella, Inc.).
-
bioRxiv - Neuroscience 2023Quote: ... then 2 parts 100% propylene oxide per 1 part Eponate 12 resin (Ted Pella) for an 1 h ...
-
bioRxiv - Bioengineering 2021Quote: We plasma treated gold Quantifoil R 2/2 EM grids (657-200-AU, Ted Pella, Redding, CA) for 10 sec at 30 W (PE-50 ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 pyruvate) using vibratome (Vibratome 1000 plus, Ted Pella Inc., CA, USA). Slices were transferred and kept for 1 hour at room temperature in artificial cerebrospinal fluid (ACSF ...
-
bioRxiv - Cancer Biology 2022Quote: ... which were prepared by biopsy punch (3 mm in diameter, Ted Pella, Sweden). 20 μl of conditioned media was added into the loading chambers followed by incubation for 12 hours at 4 °C ...
-
bioRxiv - Microbiology 2022Quote: ... We removed excess liquid with filter paper after 2 minutes and stained with 2% uranyl acetate (TED Pella Cat: 19481) for 1min ...
-
bioRxiv - Biophysics 2024Quote: ... grids (Quantifoil R1.2/1.3, Cu 200 mesh, 100 holey carbon films, 2 nm carbon support film; for images of DCVs: Ted Pella, Cu 400 mesh ...
-
bioRxiv - Pathology 2020Quote: ... a mixed solution of 2% formaldehyde (Ted Pella) and 2% glutaraldehyde (Electron Microscopy Sciences ...
-
bioRxiv - Immunology 2023Quote: ... fixed with 2% PFA (Ted Pella, Redding, CA), and washed twice with FACS buffer ...
-
bioRxiv - Immunology 2023Quote: Cell monolayers were washed with PBS 1x and fixed in situ for 1 hour at room temperature (RT) with 3 % glutaraldehyde (EM Grade, Ted Pella INC) in PBS 1x ...
-
bioRxiv - Immunology 2022Quote: Purified H10ssF was applied to glow discharged Quantifoil R 2/1 300 mesh grids (Ted Pella, Redding) at a concentration of 1 mg ml-1 ...
-
bioRxiv - Developmental Biology 2019Quote: ... The samples were then fixed for 3 minutes using the Pelco Biowave (Ted Pella), followed by overnight fixation at 4°C ...
-
bioRxiv - Developmental Biology 2023Quote: ... 3×10 minutes and dehydrated using a Pelco BioWave Pro Microwave (Ted Pella, Inc.) as follows ...
-
bioRxiv - Genetics 2022Quote: ... embryos obtained from bleached adults were spun down at 1,000 x g for 2 minutes in a 1.5 mL Eppendorf tube and resuspended in 500 µL of fixative solution containing 50% methanol (Fisher Chemical, A412SK-4) and 2% para-formaldehyde (Ted Pella, Inc., Cat # 18505) in 1X PBS buffer ...
-
bioRxiv - Developmental Biology 2021Quote: Freshly dissected third instar larval CNSs were fixed in 2% glutaraldehyde and 2% OsO4in 0.12 M sodium cacodylate (pH 7.4) by microwave (Ted Pella, BioWave Pro MW) as follows ...
-
bioRxiv - Neuroscience 2023Quote: ... and then immersed in 2% OsO4 (Ted Pella, US), 2.5% ferrocyanide (Sigma-Aldrich ...
-
bioRxiv - Biophysics 2023Quote: ... a 3 µL drop was applied to carbon coated 400 mesh copper grids (Ted Pella) that were glow discharged at 15 mA for 1 min ...
-
bioRxiv - Biochemistry 2022Quote: ... Quantifoil R2/2 400 mesh cryo-EM grids (Ted Pella) were prepared by glow-discharging for 1 min at 20 mA using a PELCO easiGLOW (Ted Pella) ...
-
bioRxiv - Systems Biology 2020Quote: ... cells were fixed with 2% glutaraldehyde (18426, Ted Pella Incorporated) in 0.1M sodium cacodylate buffer ...
-
bioRxiv - Systems Biology 2020Quote: ... cells were fixed with 2% glutaraldehyde (18426, Ted Pella Incorporated) in 0.1M sodium cacodylate buffer ...
-
bioRxiv - Cell Biology 2020Quote: ... the samples were fixed in 2% OsO4 (Ted Pella, 18451) in phosphate buffer (0.1M ...
-
bioRxiv - Genomics 2023Quote: ... Uranyl acetate (2%) and lead citrate (Ted Pella INC, USA) were used for contrast staining ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 mM calcium chloride in 0.1 M sodium cacodylate buffer pH 7.4 (Ted Pella Incorporated, 18851) for 5 minutes at 37 °C and then on ice for 1 hour ...
-
bioRxiv - Synthetic Biology 2021Quote: ... PDMS slab is punched with a diameter of 3 mm puncher (Harris Uni-Core, Ted Pella).
-
bioRxiv - Microbiology 2022Quote: ... 3 µl of each reaction were spotted onto EMS CF300-CU grids (Ted Pella, Redding, CA) for 2 min ...
-
bioRxiv - Molecular Biology 2022Quote: ... a 3 μL sample was spotted onto a freshly glow-discharged carbon-coated grid (Ted Pella), incubated for 2 min ...
-
bioRxiv - Biochemistry 2024Quote: ... 3 µl of sample was pipetted onto the grid and Grade 595 filter paper (Ted Pella) was used to blot the grid for 3 seconds ...
-
bioRxiv - Pathology 2023Quote: ... samples were fixed with 1% osmic acid (Ted pella, Shanghai, China) for 1 h ...
-
bioRxiv - Biochemistry 2021Quote: ... Vitrified samples of S-protein constructs with and without ACE2 were prepared by first glow discharging Quantifoil R1.2/1.3 300 mesh holey carbon copper grids for 1 minute using a Pelco easiGlow glow discharge unit (Ted Pella) and then applying 1.8 μL of protein suspension to the surface of the grid ...
-
bioRxiv - Biochemistry 2020Quote: Cryo-EM grids were prepared by applying 3 μl protein samples to glow-discharged (PELCO easiGlow™ Ted Pella Inc., at 15 mA for 1 minute) holey carbon grids (Quantifoil R 1.2/1.3 ...
-
bioRxiv - Biochemistry 2022Quote: Cryo-EM grids were prepared by applying 3 µl protein samples to glow-discharged (PELCO easiGlow™ Ted Pella Inc., at 15 mA for 1 minute) holey carbon grids (Quantifoil R 1.2/1.3 ...
-
bioRxiv - Systems Biology 2020Quote: ... The cells were fixed with 2% glutaraldehyde (18426, Ted Pella Incorporated) in 0.1M sodium cacodylate buffer ...