Labshake search
Citations for Ted Pella :
51 - 100 of 114 citations for 6 Isobutoxy 5 methylpyridine 3 boronic acid since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2023Quote: ... day 5 and control ring stages) were fixed overnight in 2.5% glutaraldehyde (Ted Pella, Inc.) in PBS ...
-
bioRxiv - Molecular Biology 2021Quote: ... then 3 μl samples (0.133 μM complexes) were place on copper grids (300 mesh formvar/carbon-coated) (Ted Pella, USA) that were hydrophilized by glow discharge (−20 mA ...
-
bioRxiv - Biophysics 2023Quote: ... aliquots (3 μl) of the protein sample were loaded onto glow-discharged (20 s, 15 mA; Pelco easiGlow, Ted Pella) Au grids (Quantifoil ...
-
bioRxiv - Bioengineering 2023Quote: ... 3 μL of purified samples were applied on glow-discharged (40 sec, 15 mA, PELCO easiGlow™, TED PELLA Inc.) holey carbon grids (Quantifoil Cu R1.2/1.3 ...
-
bioRxiv - Neuroscience 2020Quote: ... and stained for 60-90 sec with 5 μL of 1% uranyl acetate (Ted Pella, Inc.). All samples were imaged at an accelerating voltage of 80 kV in a JEOL JSM 1400 Plus (JOEL).
-
bioRxiv - Biophysics 2020Quote: Capsid assembly reactions (5 μL) were applied to a Formvar/carbon Cu grid (Ted Pella, 01811), briefly incubated and wicked dry ...
-
bioRxiv - Biochemistry 2022Quote: ... were glow-discharged for 5 sec in an easiGlow Glow Discharge Cleaning System (Ted Pella Inc.). 3.5 μL sample was added to the glow-discharged grid ...
-
bioRxiv - Microbiology 2024Quote: ... were glow-discharged for 5 sec in an easiGlow Glow Discharge Cleaning System (Ted Pella Inc.). 3.5 µL sample was added to the glow-discharged grid ...
-
bioRxiv - Biophysics 2021Quote: ... and 3 µL of sample were deposited and incubated for 2 min on freshly cleaved bare mica V1 (Ted Pella Inc.), after which was rinsed with Milli-Q water ...
-
bioRxiv - Cell Biology 2019Quote: ... 95% for 10 min and 100% for 30 min with 3 changes) and infiltrated with Epon-Aradite (Ted Pella, Redding, CA) for 2 days (25% of Epon-Aradite and ethanol for 2h ...
-
bioRxiv - Microbiology 2021Quote: ... A small drop of the suspension (~3 μL) was deposited on a Formvar-coated 200 mesh Cu TEM grid (Ted Pella) and allowed to air-dry at ambient temperature ...
-
bioRxiv - Biochemistry 2022Quote: ... pH 6.5 was applied onto glow-discharged lacey carbon grids coated with 3-nm carbon film (Ted Pella, product code #01824). The grids were incubated for 60 s under 100% humidity in a Vitrobot Mark IV (FEI ...
-
bioRxiv - Cell Biology 2020Quote: ... Cells were then spun at 3,000rpm for 3 m in a microcentrifuge and resuspended in 1mL of 4% paraformaldehyde (Ted Pella, Inc.) in a 133mM sucrose in PBS solution ...
-
bioRxiv - Bioengineering 2020Quote: ... 3 µl of labeled EVs were added onto glow-discharged formvar-carbon type B coated electron microscopy grids (Ted Pella Inc) for 3 minutes ...
-
bioRxiv - Biochemistry 2022Quote: ... Negative-stain transmission EM samples were prepped by applying 3 μl of fibril solution to glow-discharged 300 mesh carbon-coated formvar support films mounted on Cu grids (Ted Pella). The samples were wicked ...
-
bioRxiv - Biochemistry 2023Quote: Tetrahedral nanoparticles were first diluted to 100 μg/mL in water prior to application of 3 μL of sample onto freshly glow-discharged 400-mesh copper grids (Ted Pella). Sample was incubated on the grid for 30 s before excess liquid blotted away with filter paper (Whatman) ...
-
bioRxiv - Biochemistry 2023Quote: 3 μl of purified sample of each F constructs was applied to a glow discharged 300 mesh copper grids (Ted Pella) coved with evaporated continuous carbon on top of collodion (Electron Microscope Science ...
-
bioRxiv - Microbiology 2024Quote: ... Infected cells were washed 3 times with PBS before fixing in 1.5 ml of 2.5% electron microscopy-grade glutaraldehyde (Ted Pella, Redding, CA) in 0.1 M sodium cacodylate buffer (pH 7.4 ...
-
bioRxiv - Developmental Biology 2021Quote: ... Reusable molds were assembled by taping 3D-printed molds to glass slides (5” by 4”; Ted Pella). Sylgard 184 PDMS monomer and curing agent (Ellsworth Adhesives 4019862 ...
-
bioRxiv - Cell Biology 2020Quote: A 3 μl drop of the Nsp1–40S complex was applied to glow-discharged copper grids with lacey carbon support and a 3 nm continuous carbon film (Ted Pella, Inc). The grids were blotted for 4 s in 100% humidity at 4 °C ...
-
bioRxiv - Immunology 2022Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 μL of a 0.7 mg/ml Omicron Spike mixed with 0.16 mg/mL each of P5C3 and P2G3 Fab fragments (Final 3.2 uM Omicron Spike:1.5 uM P5C3:1.5 uM P2G3 ...
-
bioRxiv - Biophysics 2022Quote: ... a drop of 3 μl cell suspension was loaded on a glow-discharged (using a PELCO easiGlow Glow Discharger, Ted Pella Inc) grid (200 mesh gold 1.2/1.3 ...
-
bioRxiv - Genetics 2022Quote: ... and gently flattened with a large book for 3 minutes.Coverslips were sealed using clear nail polish (Ted Pella, Inc., Fisher Cat# NC1849418). Imaging was performed on a Nikon Eclipse Ti inverted spinning disk confocal microscope using a 100X 1.49 NA oil immersion objective lens ...
-
bioRxiv - Immunology 2023Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 µL of a sample containing 14 µM of the corresponding Spike and 25 µM ACE-Fc was applied to the glow-discharged grids ...
-
bioRxiv - Immunology 2023Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 µL of a sample containing 9 µM Omicron BA.1 and 16 µM mACE-Fc was applied to the glow-discharged grids ...
-
bioRxiv - Immunology 2022Quote: ... was performed by applying a drop (3 μl) of sample to a glow-discharged TEM grid (carbon supported film on 300 mesh Cu grids, Ted Pella, Ltd). After 30 sec the excess liquid was blotted ...
-
bioRxiv - Immunology 2023Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 μL of a 0.35 mg/ml protein sample was applied to the glow-discharged grids ...
-
bioRxiv - Immunology 2023Quote: Cell monolayers were washed with PBS 1x and fixed in situ for 1 hour at room temperature (RT) with 3 % glutaraldehyde (EM Grade, Ted Pella INC) in PBS 1x ...
-
bioRxiv - Biochemistry 2020Quote: ... 5 μl solution was spotted onto freshly glow-discharged carbon-coated electron microscopy grids (Ted Pella, Redding, CA). Grids were rinsed three times with 5 μl distilled water after 3 min incubation ...
-
bioRxiv - Synthetic Biology 2021Quote: Thiol-labeled prey-oligo (41 μM) was mixed with phosphine-treated 5 nm AuNP (200 nM, Ted Pella) in 50 mM NaCl ...
-
bioRxiv - Bioengineering 2022Quote: ... DOL samples (5 μL) were deposited on a glow-discharged formvar/carbon coated copper grid (Ted Pella, Inc.) for 1 minute ...
-
bioRxiv - Microbiology 2023Quote: ... 5 μL of filtered φNCKUH-21-induction supernatant was dropped on the TEM grid (Ted Pella Inc., USA) and incubated for 1 min at 25°C ...
-
bioRxiv - Plant Biology 2021Quote: ... Coverslips were mounted on 13mm aluminum stubs using double-sided carbon adhesive and sputter coated with 3 nm of gold-palladium alloy (60 Au:40 Pd, Cressington Sputter Coater 208HR, model 8000-220, Ted Pella, Redding, CA). Images were taken using a Zeiss Supra 25 FESEM operating at 5 kV ...
-
bioRxiv - Developmental Biology 2023Quote: ... Dried embryos were sputter coated with iridium to a thickness of 3 nm (Cressington 208 HR Sputter Coater, Ted Pella, Redding, CA, USA) and examined in a scanning electron microscope (FEI Quanta 200 FEG SEM ...
-
bioRxiv - Biochemistry 2020Quote: Samples (5 μl) were applied directly onto 400-mesh copper TEM grids with Formvar/Carbon support films (Ted Pella), which were glow-discharged (PELCO easiGlow ...
-
bioRxiv - Cancer Biology 2021Quote: ... 5 μL of purified EV sample was applied to a freshly glow discharged (Pelco Easiglow, Ted Pella Redding CA) carbon coated TEM grid (Electron Microscopy Sciences ...
-
bioRxiv - Plant Biology 2023Quote: ... The resin was then polymerized at 4°C under UV light for 3 days using a PELCO UVC3 Cryo Chamber (Ted Pella, Redding, CA, USA). Serial semi-thin sections (0.25 μm thick ...
-
bioRxiv - Molecular Biology 2024Quote: ... The pellet was resuspended in the assembly buffer containing 150 µM IP6 and 3 µl of the resuspension was spotted onto EMS CF300-CU grids (Ted Pella Inc., Redding, CA) for 2 min ...
-
bioRxiv - Neuroscience 2021Quote: ... 400 mesh copper grids covered by a Formvar/Carbon film (5-10 nm) were obtained from Ted Pella (Redding, CA) and 2% aqueous uranyl acetate was purchased from Electron Microscopy Sciences (Hatfield ...
-
bioRxiv - Biochemistry 2023Quote: ... 3.5 µL of a γ-TuRC aliquot from sucrose gradient was applied to Lacey Carbon Support Film grid with an Ultrathin Carbon Film (< 3 nm) (TED PELLA, INC, Prod No. 01824), plasma cleaned for 30 s ...
-
bioRxiv - Biochemistry 2023Quote: ... 1.2 µL of native γ-TuRC aliquot from the sucrose gradient fraction was applied to a Lacey Carbon Support Film grid with an Ultrathin Carbon Film (< 3 nm) (TED PELLA, INC, Prod No. 01824) or Quantifoil R2/2 300-square-mesh copper grids coated with continuous carbon film ...
-
bioRxiv - Biochemistry 2020Quote: Cryo-EM grids were prepared by applying 3 μl protein samples to glow-discharged (PELCO easiGlow™ Ted Pella Inc., at 15 mA for 1 minute) holey carbon grids (Quantifoil R 1.2/1.3 ...
-
bioRxiv - Biochemistry 2022Quote: Cryo-EM grids were prepared by applying 3 µl protein samples to glow-discharged (PELCO easiGlow™ Ted Pella Inc., at 15 mA for 1 minute) holey carbon grids (Quantifoil R 1.2/1.3 ...
-
bioRxiv - Biochemistry 2019Quote: ... Samples (5 µl) were then directly applied onto 400-mesh copper TEM grids with support films of Formvar/Carbon (Ted Pella, distributed by Getter Group Bio Med ...
-
bioRxiv - Physiology 2021Quote: ... The coverslips with dried samples were glued to aluminum stubs and sputter coated with 5 nm platinum using a Cressington 208HR (Ted Pella) rotary sputter coater ...
-
bioRxiv - Biochemistry 2021Quote: ... 3.5 μl of the protein complex was applied onto glow discharged formvar/carbon coated 300 mesh copper grids (PELCO, Ted Pella) and blotted off after adsorption of the sample for 1 min using a filter paper ...
-
bioRxiv - Cell Biology 2020Quote: ... 5 μl of dialyzed material was pipetted onto a glow-discharged Lacey holey carbon grid (Carbon Cu 300 mesh, Ted Pella), blotted for 3 s (blot force −15 ...
-
bioRxiv - Biochemistry 2023Quote: ... with 1.5x molar excess dsRNA with or without 5mM nucleotide (ATP or ATPγS) and 5% glycerol was applied to the grid and blotted with filter paper (595 Filter Paper, Ted Pella, Inc.) for 5 seconds using an Mk ...
-
bioRxiv - Cell Biology 2024Quote: ... The coverslips with dried samples were glued to aluminum stubs and sputter coated with 5 nm platinum using a Cressington 208HR (Ted Pella) rotary sputter coater ...
-
bioRxiv - Cell Biology 2020Quote: ... 150 mM NaCl and 2 mM MgCl2 for 20 min at room temperature and was adsorbed for 5 min onto a 200 mesh carbon coated Copper grid (Ted Pella, Inc.). The grid was stained with a drop of 2% freshly prepared uranyl acetate (MP Biomedicals ...