Labshake search
Citations for Ted Pella :
1 - 50 of 205 citations for 6 Fluoro 1 3 benzodioxene 8 carboxylic acid since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Evolutionary Biology 2022Quote: ... filters were cut into ~1/8 sections and placed onto an analysis bullet using adhesive and conductive tabs (#16084–6, Ted Pella, Redding, California) and sputter coated with ~5 nm gold particles ...
-
bioRxiv - Pathology 2023Quote: ... samples were fixed with 1% osmic acid (Ted pella, Shanghai, China) for 1 h ...
-
bioRxiv - Bioengineering 2023Quote: Gel purified structures (around 1 nM) were used for AFM imaging by adsorbing 6 µl of sample onto freshly cleaved mica (V1, Ted Pella). After three minutes of incubation ...
-
bioRxiv - Microbiology 2020Quote: ... and excess liquid removed by blotting for 6 s with a blotting force of −1 using vitrobot filter paper (grade 595, Ted Pella Inc.) at 4.5 °C ...
-
bioRxiv - Microbiology 2020Quote: ... and excess liquid removed by blotting for 6 s with a blotting force of −1 using vitrobot filter paper (grade 595, Ted Pella Inc.) at 4.5 ºC ...
-
bioRxiv - Bioengineering 2023Quote: ... we sealed the coverslips with black nail polish (114-8, Ted Pella) and left them overnight to dry.
-
bioRxiv - Physiology 2023Quote: ... followed by Rayon fine cloths and alumina pastes (9, 5, 3, 1, 0.5, 0.3, and 0.05 μm, Ted Pella, Inc.).
-
bioRxiv - Biophysics 2020Quote: ... single sided Kapton Tape (Ted Pella, Prod No. 16090-6) was attached to the mica to cover the surface partially and removed after evaporation ...
-
bioRxiv - Developmental Biology 2021Quote: ... glass slides (4’’ by 3’’; Ted Pella) and the feature-side of the PDMS slabs were thoroughly cleaned with tape to remove any dust particles ...
-
bioRxiv - Plant Biology 2022Quote: ... and gold particles (6 nm, 10 nm) conjugated secondary antibodies (Ted Pella). Sections were post-stained and examined with a Hitachi 7400 TEM (Hitachi-High Technologies ...
-
bioRxiv - Immunology 2023Quote: Cell monolayers were washed with PBS 1x and fixed in situ for 1 hour at room temperature (RT) with 3 % glutaraldehyde (EM Grade, Ted Pella INC) in PBS 1x ...
-
bioRxiv - Microbiology 2021Quote: ... using carbon tape (16084-3, TED PELLA, Redding, CA). To increase conduction ...
-
bioRxiv - Molecular Biology 2023Quote: ... were glow-discharged for 8 s at 10 mA using a PELCO easiGlow glow discharging system (Ted Pella) and loaded into the EM GP2 chamber ...
-
bioRxiv - Biochemistry 2020Quote: Cryo-EM grids were prepared by applying 3 μl protein samples to glow-discharged (PELCO easiGlow™ Ted Pella Inc., at 15 mA for 1 minute) holey carbon grids (Quantifoil R 1.2/1.3 ...
-
bioRxiv - Biochemistry 2022Quote: Cryo-EM grids were prepared by applying 3 µl protein samples to glow-discharged (PELCO easiGlow™ Ted Pella Inc., at 15 mA for 1 minute) holey carbon grids (Quantifoil R 1.2/1.3 ...
-
bioRxiv - Neuroscience 2020Quote: ... Tissue was trimmed of all surrounding resin and adhered to 8 mm aluminum pins (Ted Pella Inc., Redding, CA) using EpoTek silver epoxy (EMS ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 pyruvate) using vibratome (Vibratome 1000 plus, Ted Pella Inc., CA, USA). Slices were transferred and kept for 1 hour at room temperature in artificial cerebrospinal fluid (ACSF ...
-
Self-organization of embryonic stem cells into a reproducible embryo model through epigenome editingbioRxiv - Developmental Biology 2024Quote: ... The lid was put on the 8 well chamber slide and sealed with clear nail polish (Ted Pella,114-7). Slides were stored overnight at 4°C to let the CPEMs settle before imaging ...
-
bioRxiv - Cancer Biology 2022Quote: ... which were prepared by biopsy punch (3 mm in diameter, Ted Pella, Sweden). 20 μl of conditioned media was added into the loading chambers followed by incubation for 12 hours at 4 °C ...
-
bioRxiv - Cell Biology 2020Quote: Cells grown on coverslips were fixed with cold methanol for 8 min at −20°C or 4% formaldehyde (Ted Pella, Inc.) for 15 min at room temperature ...
-
bioRxiv - Bioengineering 2020Quote: ... CDDO-Me-NPs at 0.3 mg/mL in phosphate buffered saline (PBS) were prepared for TEM by pipetting 8 μL atop Formvar on copper 400 mesh TEM grids (Ted Pella) that were treated with glow discharge (PELCO easiGlow™ Glow Discharge Cleaning System) ...
-
bioRxiv - Microbiology 2023Quote: ... samples were coated with a thin iridium film of 8 nm with a magnetron sputtering Coater (208HR High-Resolution Sputter Coater, Ted Pella Inc imaged using a Nova NanoSEM 230 (FEI) ...
-
bioRxiv - Immunology 2024Quote: ... Individual TEM grids were prepared by applying 8 µL of protein sample onto the carbon surface of 300 mesh lacey formvar/carbon TEM grids (Ted Pella Inc.) for 90 seconds ...
-
bioRxiv - Developmental Biology 2019Quote: ... The samples were then fixed for 3 minutes using the Pelco Biowave (Ted Pella), followed by overnight fixation at 4°C ...
-
bioRxiv - Developmental Biology 2023Quote: ... 3×10 minutes and dehydrated using a Pelco BioWave Pro Microwave (Ted Pella, Inc.) as follows ...
-
bioRxiv - Microbiology 2024Quote: A purified LUJV spike sample (3.5 μl) was applied on glow-discharged (6 s, 12 mA; Pelco easiGlow, Ted Pella) graphene oxide Quantifoil copper grids ...
-
bioRxiv - Biophysics 2023Quote: ... a 3 µL drop was applied to carbon coated 400 mesh copper grids (Ted Pella) that were glow discharged at 15 mA for 1 min ...
-
bioRxiv - Genomics 2019Quote: ... and mounted with the retina apical surface facing an acid-washed cover glass coated with Bio-Bond tissue adhesive (Ted Pella Inc.). Each cover glass contained 9 wells and several retinas were mounted per well ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 mM calcium chloride in 0.1 M sodium cacodylate buffer pH 7.4 (Ted Pella Incorporated, 18851) for 5 minutes at 37 °C and then on ice for 1 hour ...
-
bioRxiv - Synthetic Biology 2021Quote: ... PDMS slab is punched with a diameter of 3 mm puncher (Harris Uni-Core, Ted Pella).
-
bioRxiv - Microbiology 2022Quote: ... 3 µl of each reaction were spotted onto EMS CF300-CU grids (Ted Pella, Redding, CA) for 2 min ...
-
bioRxiv - Molecular Biology 2022Quote: ... a 3 μL sample was spotted onto a freshly glow-discharged carbon-coated grid (Ted Pella), incubated for 2 min ...
-
bioRxiv - Biochemistry 2024Quote: ... 3 µl of sample was pipetted onto the grid and Grade 595 filter paper (Ted Pella) was used to blot the grid for 3 seconds ...
-
bioRxiv - Cell Biology 2020Quote: ... The replicas were separated from glass coverslips using hydrofluoric acid and mounted on glow-discharged Formvar/carbon-coated 75-mesh copper TEM grids (Ted Pella 01802-F).
-
bioRxiv - Molecular Biology 2019Quote: 3 μL of sample was applied to plasma cleaned lacey carbon grids (Ted Pella, Inc., 300 mesh), followed by plunge-freezing using a Vitrobot Mark IV (FEI ...
-
bioRxiv - Physiology 2020Quote: ... The sections were collected as ribbons of 3-4 sections on a 75-mesh grid (Ted Pella). Every grid was then poststained with 3% uranyl acetate in water for 10 minutes and Reynold’s lead citrate for 2 minutes ...
-
bioRxiv - Cell Biology 2023Quote: ... 3 µl of the co-polymer was applied to a continuous carbon grid (Ted Pella, 300 mesh), it was stained three times for 10 s with drops of 1.5% uranyl acetate ...
-
bioRxiv - Cancer Biology 2022Quote: ... Tumor samples were individually minced using 3-4 passes of a McIllwain tissue chopper (Ted Pella 10180) set to chop 150 mm sections at 60% of the maximal chopping rate and 50% force ...
-
bioRxiv - Microbiology 2023Quote: ... The buffer was removed and samples stained with post-fixative for 3 hours (Osmium tetroxide, Ted Pella; Tannic Acid ...
-
bioRxiv - Cell Biology 2019Quote: Cell pellets (2-3 μl) were loaded onto copper membrane carriers (1mm x 0.5 mm; Ted Pella Inc.) and cryofixed using the EM PACT2 high pressure freezer (Leica) ...
-
bioRxiv - Biochemistry 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter paper (Ted Pella Inc.)) ...
-
bioRxiv - Immunology 2021Quote: ... at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter papers (Ted Pella Inc.)) ...
-
bioRxiv - Biophysics 2020Quote: ... for a total of 41 datasets at 3 different locations on a waffle pattern grating replica grid (Ted Pella). The dose symmetric tilt scheme used was adapted from others (Hagen et al. ...
-
bioRxiv - Plant Biology 2022Quote: ... The grids were blotted for 2–3 s using a pair of filter papers (55 mm, Ted Pella Inc.) at 8°C with 100% humidity and flash-frozen in liquid ethane using an FEI Vitrobot Marked IV ...
-
bioRxiv - Biochemistry 2023Quote: ... the grids were blotted for 4.5-5 s (blot force of 3) using 595 filter paper (Ted Pella, Inc) before being immediately plunged into liquid ethane for vitrification ...
-
bioRxiv - Biochemistry 2023Quote: ... 3 μl of protein solution was applied onto a grid freshly glow-discharged in PELCO easiGlow system (Ted Pella). In-house graphene grids were prepared from Trivial Transfer Graphene sheets (ACS Material ...
-
bioRxiv - Molecular Biology 2021Quote: ... then 3 μl samples (0.133 μM complexes) were place on copper grids (300 mesh formvar/carbon-coated) (Ted Pella, USA) that were hydrophilized by glow discharge (−20 mA ...
-
bioRxiv - Biophysics 2023Quote: ... aliquots (3 μl) of the protein sample were loaded onto glow-discharged (20 s, 15 mA; Pelco easiGlow, Ted Pella) Au grids (Quantifoil ...
-
bioRxiv - Bioengineering 2023Quote: ... 3 μL of purified samples were applied on glow-discharged (40 sec, 15 mA, PELCO easiGlow™, TED PELLA Inc.) holey carbon grids (Quantifoil Cu R1.2/1.3 ...
-
bioRxiv - Biophysics 2021Quote: ... and 3 µL of sample were deposited and incubated for 2 min on freshly cleaved bare mica V1 (Ted Pella Inc.), after which was rinsed with Milli-Q water ...