Labshake search
Citations for Ted Pella :
1 - 50 of 271 citations for 6 Chloroimidazo 1 2 b pyridazine 3 carboxylic acid since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Bioengineering 2020Quote: ... 3 µl of labeled EVs were added onto glow-discharged formvar-carbon type B coated electron microscopy grids (Ted Pella Inc) for 3 minutes ...
-
bioRxiv - Pathology 2023Quote: ... samples were fixed with 1% osmic acid (Ted pella, Shanghai, China) for 1 h ...
-
bioRxiv - Cell Biology 2019Quote: Cell pellets (2-3 μl) were loaded onto copper membrane carriers (1mm x 0.5 mm; Ted Pella Inc.) and cryofixed using the EM PACT2 high pressure freezer (Leica) ...
-
bioRxiv - Plant Biology 2022Quote: ... The grids were blotted for 2–3 s using a pair of filter papers (55 mm, Ted Pella Inc.) at 8°C with 100% humidity and flash-frozen in liquid ethane using an FEI Vitrobot Marked IV ...
-
bioRxiv - Microbiology 2021Quote: ... Phages (3.5 µL) were deposited and incubated for 1 min on TEM grids (Carbon Type-B 400 mesh, TED PELLA). Grids were washed thrice with 40 µL of MilliQ water and stained with 3.5 µL of 2% (w/v ...
-
bioRxiv - Biophysics 2021Quote: ... and 3 µL of sample were deposited and incubated for 2 min on freshly cleaved bare mica V1 (Ted Pella Inc.), after which was rinsed with Milli-Q water ...
-
bioRxiv - Cell Biology 2020Quote: ... placed individually into brass planchettes (Type A/B; Ted Pella, Inc.), and rapidly frozen with a HPM-010 High Pressure Freezing machine (BalTec/ABRA) ...
-
bioRxiv - Microbiology 2020Quote: ... deposited on Type-B carbon-coated copper grids (Ted Pella Inc.), were examined in a JEOL 2010-F HR-TEM (Jeol Ltd.) ...
-
bioRxiv - Biophysics 2023Quote: ... glow-discharged grids (Carbon Type-B, 400 mesh, Cu, Ted Pella) were floated on a 5 µL sample bead on parafilm for 1 minute ...
-
bioRxiv - Cell Biology 2022Quote: ... Pellets were transferred to brass planchettes (type A/B; Ted Pella, Inc.) and ultra-rapidly frozen with a HPM-010 high-pressure freezing machine (Bal-Tec/ABRA) ...
-
bioRxiv - Neuroscience 2023Quote: ... Carbon-B grids (formvar carbon coated copper 400 mesh) from Ted Pella were used ...
-
bioRxiv - Neuroscience 2019Quote: ... Tissue was then allowed to pre-infiltrate 2 h in a 2:1 mix of propylene oxide and Eponate resin (Ted Pella, Redding, CA), then transferred into a 1:1 mix of propylene oxide and Eponate resin and allowed to infiltrate overnight on a gentle rotator ...
-
bioRxiv - Bioengineering 2023Quote: Gel purified structures (around 1 nM) were used for AFM imaging by adsorbing 6 µl of sample onto freshly cleaved mica (V1, Ted Pella). After three minutes of incubation ...
-
bioRxiv - Neuroscience 2023Quote: ... then 2 parts 100% propylene oxide per 1 part Eponate 12 resin (Ted Pella) for an 1 h ...
-
bioRxiv - Microbiology 2020Quote: ... and excess liquid removed by blotting for 6 s with a blotting force of −1 using vitrobot filter paper (grade 595, Ted Pella Inc.) at 4.5 °C ...
-
bioRxiv - Microbiology 2020Quote: ... and excess liquid removed by blotting for 6 s with a blotting force of −1 using vitrobot filter paper (grade 595, Ted Pella Inc.) at 4.5 ºC ...
-
bioRxiv - Cancer Biology 2023Quote: ... dropped onto a TEM grid (Ted Pella Inc, Carbon Type-B, 200 mesh, Copper), allowed to dry ...
-
bioRxiv - Physiology 2023Quote: ... followed by Rayon fine cloths and alumina pastes (9, 5, 3, 1, 0.5, 0.3, and 0.05 μm, Ted Pella, Inc.).
-
bioRxiv - Biophysics 2020Quote: ... single sided Kapton Tape (Ted Pella, Prod No. 16090-6) was attached to the mica to cover the surface partially and removed after evaporation ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... filters were cut into ~1/8 sections and placed onto an analysis bullet using adhesive and conductive tabs (#16084–6, Ted Pella, Redding, California) and sputter coated with ~5 nm gold particles ...
-
bioRxiv - Developmental Biology 2021Quote: ... glass slides (4’’ by 3’’; Ted Pella) and the feature-side of the PDMS slabs were thoroughly cleaned with tape to remove any dust particles ...
-
bioRxiv - Cell Biology 2020Quote: ... Copper coated carbon grids were purchased from Ted Pella (01814F, carbon type-B, 400 mesh, Cu) DMEM advanced F12 media (12634010) ...
-
bioRxiv - Immunology 2022Quote: Purified H10ssF was applied to glow discharged Quantifoil R 2/1 300 mesh grids (Ted Pella, Redding) at a concentration of 1 mg ml-1 ...
-
bioRxiv - Plant Biology 2022Quote: ... and gold particles (6 nm, 10 nm) conjugated secondary antibodies (Ted Pella). Sections were post-stained and examined with a Hitachi 7400 TEM (Hitachi-High Technologies ...
-
bioRxiv - Immunology 2023Quote: Cell monolayers were washed with PBS 1x and fixed in situ for 1 hour at room temperature (RT) with 3 % glutaraldehyde (EM Grade, Ted Pella INC) in PBS 1x ...
-
bioRxiv - Microbiology 2021Quote: ... using carbon tape (16084-3, TED PELLA, Redding, CA). To increase conduction ...
-
bioRxiv - Neuroscience 2020Quote: ... brains were placed in 2 x 2 x 2 inch plastic blocks filled with cryo-embedding compound (Ted Pella Inc., Redding, CA). Brains were sectioned coronally at 40 microns and sections were stored in cryoprotectant solution (30 % sucrose ...
-
bioRxiv - Cancer Biology 2019Quote: ... The NPs were supported in a copper mesh covered with carbon (Support Films, Carbon Type-B, Ted Pella, inc.). The observations were performed with a TEM HT7700 (Hitashi ...
-
bioRxiv - Biochemistry 2021Quote: ... Vitrified samples of S-protein constructs with and without ACE2 were prepared by first glow discharging Quantifoil R1.2/1.3 300 mesh holey carbon copper grids for 1 minute using a Pelco easiGlow glow discharge unit (Ted Pella) and then applying 1.8 μL of protein suspension to the surface of the grid ...
-
bioRxiv - Bioengineering 2019Quote: ... samples were sandwiched between two carriers (200 μm brass planchet, Type B freezer hats, Ted Pella, Inc., Redding, CA, USA), filled with 1-hexadecane (Sigma-Aldrich ...
-
bioRxiv - Biochemistry 2020Quote: Cryo-EM grids were prepared by applying 3 μl protein samples to glow-discharged (PELCO easiGlow™ Ted Pella Inc., at 15 mA for 1 minute) holey carbon grids (Quantifoil R 1.2/1.3 ...
-
bioRxiv - Biochemistry 2022Quote: Cryo-EM grids were prepared by applying 3 µl protein samples to glow-discharged (PELCO easiGlow™ Ted Pella Inc., at 15 mA for 1 minute) holey carbon grids (Quantifoil R 1.2/1.3 ...
-
bioRxiv - Biochemistry 2022Quote: ... 100 mM glycine to glow-discharged C-flat CF-2/2 C-T-grids (TED PELLA).
-
bioRxiv - Bioengineering 2022Quote: ... A drop of plasmonic nanostructure aqueous dispersion was casted onto the copper grids (Carbon Type-B, 200 mesh, Ted Pella, USA). The extinction spectra of plasmonic nanostructures were acquired using shimadzu UV-1800 spectrophotometer ...
-
bioRxiv - Bioengineering 2021Quote: We plasma treated gold Quantifoil R 2/2 EM grids (657-200-AU, Ted Pella, Redding, CA) for 10 sec at 30 W (PE-50 ...
-
bioRxiv - Synthetic Biology 2020Quote: ... 20 μL (concentration of 1-2 nM) of sample was deposited on freshly cleaved mica (Grade V1, 10 mm, #50, Ted Pella, Inc.) for 5 min ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 pyruvate) using vibratome (Vibratome 1000 plus, Ted Pella Inc., CA, USA). Slices were transferred and kept for 1 hour at room temperature in artificial cerebrospinal fluid (ACSF ...
-
bioRxiv - Cancer Biology 2022Quote: ... which were prepared by biopsy punch (3 mm in diameter, Ted Pella, Sweden). 20 μl of conditioned media was added into the loading chambers followed by incubation for 12 hours at 4 °C ...
-
bioRxiv - Microbiology 2022Quote: ... We removed excess liquid with filter paper after 2 minutes and stained with 2% uranyl acetate (TED Pella Cat: 19481) for 1min ...
-
bioRxiv - Biophysics 2024Quote: ... grids (Quantifoil R1.2/1.3, Cu 200 mesh, 100 holey carbon films, 2 nm carbon support film; for images of DCVs: Ted Pella, Cu 400 mesh ...
-
Genome modularization reveals overlapped gene topology is necessary for efficient viral reproductionbioRxiv - Synthetic Biology 2020Quote: A 4 μL solution of decompressed or wild-type ϕX174 virions were applied to glow-discharged copper grids (carbon type B with formvar, 200 mesh (Ted Pella Inc., United States)) ...
-
bioRxiv - Pathology 2020Quote: ... a mixed solution of 2% formaldehyde (Ted Pella) and 2% glutaraldehyde (Electron Microscopy Sciences ...
-
bioRxiv - Immunology 2023Quote: ... fixed with 2% PFA (Ted Pella, Redding, CA), and washed twice with FACS buffer ...
-
bioRxiv - Developmental Biology 2019Quote: ... The samples were then fixed for 3 minutes using the Pelco Biowave (Ted Pella), followed by overnight fixation at 4°C ...
-
bioRxiv - Developmental Biology 2023Quote: ... 3×10 minutes and dehydrated using a Pelco BioWave Pro Microwave (Ted Pella, Inc.) as follows ...
-
bioRxiv - Developmental Biology 2021Quote: Freshly dissected third instar larval CNSs were fixed in 2% glutaraldehyde and 2% OsO4in 0.12 M sodium cacodylate (pH 7.4) by microwave (Ted Pella, BioWave Pro MW) as follows ...
-
bioRxiv - Neuroscience 2023Quote: ... and then immersed in 2% OsO4 (Ted Pella, US), 2.5% ferrocyanide (Sigma-Aldrich ...
-
bioRxiv - Microbiology 2024Quote: A purified LUJV spike sample (3.5 μl) was applied on glow-discharged (6 s, 12 mA; Pelco easiGlow, Ted Pella) graphene oxide Quantifoil copper grids ...
-
bioRxiv - Biophysics 2023Quote: ... a 3 µL drop was applied to carbon coated 400 mesh copper grids (Ted Pella) that were glow discharged at 15 mA for 1 min ...
-
bioRxiv - Biochemistry 2022Quote: ... Quantifoil R2/2 400 mesh cryo-EM grids (Ted Pella) were prepared by glow-discharging for 1 min at 20 mA using a PELCO easiGLOW (Ted Pella) ...