Labshake search
Citations for Ted Pella :
1 - 50 of 170 citations for 3 22 Dihydroxyolean 12 En 29 Oic Acid since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2022Quote: ... then stained en bloc staining with 1 % aqueous uranyl acetate (Ted Pella Inc.) at 4 °C for 3 h ...
-
bioRxiv - Cell Biology 2023Quote: ... En bloc staining was performed with 1% aqueous uranyl acetate (Ted Pella Inc.) at 4ºC for 3 hours ...
-
bioRxiv - Synthetic Biology 2021Quote: ... 22 × 40 mm (Ted Pella, Inc) by the flow of a bacterial suspension of 2.26 × 108 cells/mL in the supplemented M63 medium ...
-
bioRxiv - Synthetic Biology 2021Quote: ... 22 × 40 mm (Ted Pella, Inc). CLSM was performed at room temperature (23°C ...
-
bioRxiv - Synthetic Biology 2021Quote: ... 22 × 40 mm (Ted Pella, Inc). Both static and flow biofilms were then dried in air at room temperature (24-26°C ...
-
bioRxiv - Physiology 2023Quote: ... and then en bloc stained with 1% aqueous uranyl acetate (Ted Pella Inc., Redding, CA, USA), dehydrated in a graded series of ethanol ...
-
bioRxiv - Systems Biology 2023Quote: ... and then en bloc stained with 1% aqueous uranyl acetate (Ted Pella Inc., Redding, CA, USA), dehydrated in a graded series of ethanol ...
-
bioRxiv - Neuroscience 2023Quote: ... 1 22 × 40 mm coverslip (Ted Pella #260353) to a low profile open diamond bath imaging chamber (Warner Instruments RC-26GLP ...
-
bioRxiv - Neuroscience 2020Quote: ... 1 22 x 40 mm coverslip (Ted Pella #260353) to a recording chamber using silicone lubricant (Dow Molykote 111 O-Ring Silicone Lubricant) ...
-
bioRxiv - Microbiology 2024Quote: ... then rinsed in deionized water prior to en bloc staining with 1% aqueous uranyl acetate (Ted Pella Inc.) for 1 hr ...
-
bioRxiv - Neuroscience 2023Quote: ... Samples were then rinsed extensively in dH20 prior to en bloc staining with 1% aqueous uranyl acetate (Ted Pella Inc.) for 1 hour ...
-
bioRxiv - Cell Biology 2024Quote: ... Samples were then rinsed extensively in dH2O prior to en bloc staining with 1% aqueous uranyl acetate (Ted Pella Inc.) for 1 hr ...
-
bioRxiv - Microbiology 2021Quote: ... Samples were then rinsed extensively in deionized water prior to en bloc staining with 1% aqueous uranyl acetate (Ted Pella Inc.) for 1 h ...
-
bioRxiv - Microbiology 2020Quote: ... Samples were then rinsed extensively in dH2O prior to en bloc staining with 1% aqueous uranyl acetate (Ted Pella Inc., Redding, CA) for 1 h ...
-
bioRxiv - Microbiology 2022Quote: ... Samples were then rinsed extensively in dH20 prior to en bloc staining with 1% aqueous uranyl acetate (Ted Pella Inc., Redding, CA) for 1 hr ...
-
bioRxiv - Microbiology 2021Quote: ... for 1 hr before rinsing in dH2O prior to en bloc staining with 1% aqueous uranyl acetate (Ted Pella Inc., Redding, CA) for 1 hr ...
-
bioRxiv - Microbiology 2022Quote: ... Samples were then rinsed extensively in dH20 prior to en bloc staining with 1% aqueous uranyl acetate (Ted Pella Inc., Redding, CA) for 1 hr ...
-
bioRxiv - Cell Biology 2024Quote: ... 100% 3 x 5 min) and then infiltrated with increasing concentrations of Eponate 12 resin (Ted Pella Inc., Redding, CA, USA) diluted with anhydrous acetone (35% ...
-
bioRxiv - Microbiology 2022Quote: ... Samples were then rinsed extensively in cold dH20 prior to en bloc staining with 1% aqueous uranyl acetate (Ted Pella Inc., Redding, CA) at 4 ºC for 3 h ...
-
bioRxiv - Cell Biology 2021Quote: ... Epon blocks were glued onto the SEM sample mounting aluminum and platinum en bloc coating on the sample surface was carried out with the sputter coater (Ted Pella, Inc., Redding, California). Sample were FIBSEM imaged in a Crossbeam 550 FIBSEM workstation operating under SmartSEM (Carl Zeiss Microscopy GmbH ...
-
bioRxiv - Cell Biology 2022Quote: ... platinum en bloc coating (20-25 nm thick) of the sample surface was carried out with the sputter coater (Ted Pella, Inc., Redding, California). Sample were FIB-SEM imaged in a Crossbeam 550 FIBSEM workstation operating under SmartSEM (Carl Zeiss Microscopy GmbH ...
-
bioRxiv - Cell Biology 2022Quote: Epon block was glued onto the SEM sample mounting aluminum stub and platinum en bloc coating on the sample surface was carried out with the sputter coater (Ted Pella, Inc., Redding, California). The cell of interest was relocated under SEM imaging based on pre-recorded coordinates and FIB-SEM imaged in a Crossbeam 550 FIBSEM workstation operating under SmartSEM (Carl Zeiss Microscopy GmbH ...
-
bioRxiv - Bioengineering 2022Quote: ... acetone:resin) for 90 min each with gyration.[29] The samples were then resin-embedded in Beem capsules (130, Ted Pella, CA, USA) and cured overnight in a 70°C oven ...
-
bioRxiv - Neuroscience 2024Quote: ... and embedded in Eponate 12 (Ted Pella, Inc). Ultrathin sections (60–65 nm ...
-
bioRxiv - Microbiology 2024Quote: ... and embedding in Eponate 12 (Ted Pella, Inc). Ultrathin sections (60–65 nm ...
-
bioRxiv - Microbiology 2024Quote: ... and embedding in Eponate 12 (Ted Pella, Inc). Ultrathin sections (60–65 nm ...
-
bioRxiv - Cell Biology 2024Quote: ... and embedding in Eponate 12 (Ted Pella, Inc). Ultrathin sections (60–65 nm ...
-
bioRxiv - Cell Biology 2020Quote: ... Cells from early-log cultures grown at 22°C in synthetic complete medium supplemented with 0.1 g/L adenine were fixed in 4 % paraformaldehyde (Ted Pella) in 100 mM sucrose for 15 min at room temperature and washed twice in phosphate-buffer saline ...
-
bioRxiv - Neuroscience 2021Quote: ... and embedded in Eponate-12 (Ted Pella, Redding, CA). Ultrathin sections (60 nm ...
-
bioRxiv - Cell Biology 2021Quote: ... the samples were embedded in Eponate 12 (Ted Pella). Ultramicrotomy was performed and ultrathin sections (70 nm ...
-
bioRxiv - Microbiology 2022Quote: ... and embedded in Eponate 12 resin (Ted Pella Inc). Sections of 95 nm were cut with a Leica Ultracut UCT ultramicrotome (Leica Microsystems Inc. ...
-
bioRxiv - Microbiology 2022Quote: ... and embedded in Eponate 12 resin (Ted Pella Inc). Sections of 95 nm were cut with a Leica Ultracut UCT ultramicrotome (Leica Microsystems Inc. ...
-
bioRxiv - Neuroscience 2022Quote: ... propylene oxide and embedded in Eponate 12 (Ted Pella) resin ...
-
bioRxiv - Cell Biology 2024Quote: ... then embedded in Eponate 12 resin (Ted Pella, #18005). Sections ...
-
bioRxiv - Microbiology 2022Quote: ... and embedded in Eponate 12 resin (Ted Pella, Inc.). Sections of 95 nm were cut with a Leica Ultracut UCT ultramicrotome (Leica Microsystems Inc. ...
-
bioRxiv - Microbiology 2022Quote: ... and embedded in Eponate 12 resin (Ted Pella Inc). Sections of 95 nm were cut with a Leica Ultracut UCT ultramicrotome (Leica Microsystems Inc. ...
-
bioRxiv - Microbiology 2024Quote: ... and embedded in Eponate 12 resin (Ted Pella, Inc.) cut into sections (95 nm ...
-
bioRxiv - Cell Biology 2021Quote: ... samples embedded in eponate 12 medium (Ted Pella, Redding, CA). Ultrathin sections (85 nm ...
-
bioRxiv - Microbiology 2023Quote: ... and finally embedded in Eponate 12 resin (Ted Pella Inc.). Sections of 95 nm were cut with a Leica Ultracut UCT ultramicrotome (Leica Microsystems Inc. ...
-
bioRxiv - Microbiology 2024Quote: ... 1% Low molecular weight tannic acid (Ted Pella Inc) for 20 minutes ...
-
bioRxiv - Bioengineering 2021Quote: ... infiltrated and embedded in resin (Eponate-12; Ted Pella, Redding, CA), and polymerized in a 65°C oven ...
-
bioRxiv - Cancer Biology 2020Quote: ... and embedded in Eponate-12 epoxy resin (Ted Pella, Redding, CA). Tissue samples were sectioned (85nm thickness ...
-
bioRxiv - Microbiology 2021Quote: ... and embedded in Eponate 12 resin (Ted Pella Inc., Redding, CA). Sections of 95 nm were cut with a Leica Ultracut UCT ultramicrotome (Leica Microsystems Inc. ...
-
bioRxiv - Microbiology 2023Quote: ... and then infiltrated and embedded in Eponate 12 resin (Ted Pella).
-
bioRxiv - Immunology 2024Quote: ... the samples were embedded in Epon 12 (Ted Pella, Redding, CA). Ultramicrotomy was performed ...
-
bioRxiv - Microbiology 2024Quote: ... Cells were embedded into an Eponate 12 Resin (Ted Pella inc) and left for two days at 60°C to achieve complete polymerization ...
-
bioRxiv - Immunology 2021Quote: ... and polymerized in Eponate 12 resin (Ted Pella Inc., Redding, CA, USA). Sections of ~70 nm thickness were cut using a Leica Ultracut S ultramicrotome and stained with 5% uranyl acetate and 2% lead citrate prior to imaging ...
-
bioRxiv - Biochemistry 2020Quote: ... Freshly cleaved muscovite mica (12 mm diameter; Ted Pella Inc. grade V1) was mounted on a teflon disc (16 mm ...
-
bioRxiv - Cell Biology 2024Quote: ... mounted on 12 mm Al stubs (Ted Pella, Redding, CA, cat# 16111) using double sticky carbon tabs ...
-
bioRxiv - Neuroscience 2024Quote: ... sections were infiltrated with Eponate 12 resin (Ted Pella Inc, Cat#18010) and then flat-embedded between Aclar films (Ted Pella Inc ...