Labshake search
Citations for Ted Pella :
351 - 400 of 411 citations for Locostatin CAS 90719 30 5 100% since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2021Quote: ... The brainstem was dissected and the rostral end was glued to the platform of the cutting chamber of a vibrating slicer (DSK microslicer, Ted Pella, Redding, CA) and covered with the ice-cold cutting solution ...
-
bioRxiv - Genomics 2020Quote: ... The grids were rinsed and incubated with a rabbit secondary antibody conjugated to 15 nm gold at a 1:20 dilution in blocking buffer (Ted Pella, Redding, CA). Grids were post stained with 2% uranyl acetate and Reynolds lead citrate and imaged in a Tecnai T12 microscope ...
-
bioRxiv - Microbiology 2021Quote: Five microliters of purified virus or pelleted cores were placed on a Formvar and carboncoated 300 mesh grid (Ted Pella Inc., Redding, CA) and stained with 1% uranyl acetate ...
-
bioRxiv - Neuroscience 2021Quote: ... Brain slices (500 μm) containing the nAcc were obtained using a vibratome (PELCO, 1000 Plus Sectioning System, Ted Pella Inc., Redding, CA, USA), and nAcc tissue was dissected and collected ...
-
bioRxiv - Biophysics 2021Quote: ... A 3 μl drop of sample was applied to a glow-discharged continuous carbon coated EM specimen grid (400 mesh Cu grid, Ted Pella, Redding, CA). Excess protein was removed by blotting with filter paper and washing the grid two times with dilution buffer ...
-
bioRxiv - Cell Biology 2021Quote: Negative staining for lysosomes or liposomes was performed on glow discharged copper grids (300 mesh) coated with a thin carbon film (Ted Pella, Redding, CA). After adding 3 μL sample to the grids ...
-
bioRxiv - Plant Biology 2021Quote: ... Coverslips were mounted on 13mm aluminum stubs using double-sided carbon adhesive and sputter coated with 3 nm of gold-palladium alloy (60 Au:40 Pd, Cressington Sputter Coater 208HR, model 8000-220, Ted Pella, Redding, CA). Images were taken using a Zeiss Supra 25 FESEM operating at 5 kV ...
-
bioRxiv - Neuroscience 2020Quote: ... Brains were cut at the coronal orientation into 350 µm cortico-hippocampal slices using a Pelco 102 Vibratome (Ted Pella, Inc., Redding, CA). Slices were then hemisected and allowed to recover at 35°C for 60 min in aCSF containing (in mM) ...
-
bioRxiv - Neuroscience 2020Quote: Sections were dried at 50°C for 20 minutes and the sections were surrounded using a liquid PAP pen (Ted Pella; Redding, CA). Sections were then rehydrated in PBS for 20 minutes prior to blocking for 1 hour (1% Tween-20 ...
-
bioRxiv - Biochemistry 2020Quote: The aggregated CA sample were diluted 20 times and 10 μL sample were drop-casted onto freshly cleaved MICA sheet (Ted Pella, Inc, USA). After 1-hour of incubation ...
-
bioRxiv - Bioengineering 2020Quote: ... The brains were extracted and cut at the epicenter of the lesion using a rat brain matrix in the coronal plane (Ted Pella Inc., CA). Two half-sections submerged in optimal cutting temperature compound (Tissue Tek ...
-
bioRxiv - Physiology 2022Quote: ... Cells were cultured to 90% confluency on either 35 mm Petri dishes or on 15 × 15 mm glass coverslips #1.5 (Ted Pella Inc., Redding, CA). They were starved two hours in DMEM medium without serum before treatment ...
-
bioRxiv - Developmental Biology 2023Quote: ... Dried embryos were sputter coated with iridium to a thickness of 3 nm (Cressington 208 HR Sputter Coater, Ted Pella, Redding, CA, USA) and examined in a scanning electron microscope (FEI Quanta 200 FEG SEM ...
-
bioRxiv - Molecular Biology 2023Quote: Coverslips were mounted on 13 mm diameter aluminum stubs with carbon adhesive tabs and sputter coated with a 60:40 gold:palladium alloy using a Cressington 208HR Sputter Coater (Ted Pella Inc, Redding CA). Pre-sputter coated coverslips were made prior to metaphase drop and adherence ...
-
bioRxiv - Pathology 2023Quote: ... the purified EV samples were diluted 20-fold in PBS and applied to 200-mesh Formvar/Carbon grids (Ted Pella, Redding, CA. USA) and viewed with an electron microscope (HT7700 ...
-
bioRxiv - Immunology 2024Quote: ... The grids were subjected to glow discharge (15 mA for 15 s) in a Pelco easiGlow glow discharge cleaning system (Ted Pella, Redding, CA). The climate chamber of a Vitrobot Mark IV (Thermo Fisher ...
-
bioRxiv - Biochemistry 2023Quote: ... The particles were visualized using negative staining by placing a small volume onto carbon-coated copper/rhodium grids (Ted Pella Inc., Redding, CA) and staining with 1% uranyl acetate (Polysciences ...
-
bioRxiv - Neuroscience 2023Quote: ... A 1mm slice cut from the medial side of the right hemisphere was fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Ted Pella Inc., Redding, CA) in 100mM cacodylate buffer ...
-
bioRxiv - Microbiology 2022Quote: The cells of interest were located in the polymerized resin block, trimmed and attached to pre-tilt 45° SEM stubs (Agar Scientific, Stansted, UK) using colloidal silver paint (Ted Pella, Redding, CA), sputter-coated with platinum and subjected to FIB/SEM tomography ...
-
bioRxiv - Biophysics 2022Quote: Three µl of sample was added to glow-discharged ultrathin carbon on lacey carbon support film grids (400 mesh, Ted Pella, Redding, CA) for one min ...
-
bioRxiv - Microbiology 2022Quote: ... in vitro grown differentiated polarized monolayers of human ileal enteroid samples as well as mouse intestinal biopsy samples were fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Ted Pella, Inc., Redding, CA) in 100 mM sodium cacodylate buffer ...
-
bioRxiv - Microbiology 2022Quote: ... Samples were then rinsed extensively in cold dH20 prior to en bloc staining with 1% aqueous uranyl acetate (Ted Pella Inc., Redding, CA) at 4 ºC for 3 h ...
-
bioRxiv - Cell Biology 2022Quote: ... fixed in 4% v/v paraformaldehyde (PFA) in 1×PBS and lobes were cut into 50 μm sections using a Vibratome apparatus (Ted Pella, Redding, CA). For IFA ...
-
bioRxiv - Cell Biology 2023Quote: ... https://dx.doi.org/10.17504/protocols.io.36wgq7je5vk5/v2) where the incubation steps were aided by microwave application using Pelco Biowave Pro+ microwave processing system (Ted Pella, Redding, CA). To improve penetration of staining agents into the tissue ...
-
bioRxiv - Cell Biology 2024Quote: ... the critical point dried samples (taken prior to rotary shadowing) were sputter coated with gold palladium using a Cressington 108auto sputter coater (Ted Pella, Redding, CA), mounted on aluminum stubs ...
-
bioRxiv - Microbiology 2024Quote: ... Lacey carbon cryo grids and 2% (w/w) solutions of methylamine vanadate (Nano-Van) and methylamine tungstate (Nano-W) negative stains were purchased from Ted Pella (Redding, CA). All other chemical reagents were purchased from either VWR (Radnor ...
-
bioRxiv - Biochemistry 2024Quote: ... The collagens were allowed to incubate at the given temperature in solution for different time periods before depositing 50 μL of the diluted sample on freshly cleaved mica (Highest Grade V1 AFM MicaQ Discs, 10 mm; Ted Pella, Redding, CA). The samples were left to sit on mica for 10-30 seconds ...
-
bioRxiv - Neuroscience 2024Quote: ... They were then embedded in 4% agar and 100 µm coronal slices were cut using a Vibratome (Series 1000, Ted Pella Inc). Slices were mounted on slides and stained with Hoescht (20 µg/mL) ...
-
bioRxiv - Plant Biology 2023Quote: ... the AWF or EVs pellets were diluted by 100-fold in VIB buffer and deposited onto a 300-mesh carbon-coated copper grid (Ted Pella, Inc.). The grids were then negatively stained with 50 µl of 2% uranyl acetate ...
-
bioRxiv - Biochemistry 2024Quote: ... that were glow discharged for 100 s at a current of 15 mA using a PELCO easiGlowTM glow discharger (Ted Pella, Inc). The grids were then blotted once with filter paper for 4.5 sec to remove excess liquid and plunge-frozen in liquid ethane using a FEI Vitrobot Mark IV (Thermo Fisher Scientific Ltd ...
-
bioRxiv - Cell Biology 2020Quote: ... 150 mM NaCl and 2 mM MgCl2 for 20 min at room temperature and was adsorbed for 5 min onto a 200 mesh carbon coated Copper grid (Ted Pella, Inc.). The grid was stained with a drop of 2% freshly prepared uranyl acetate (MP Biomedicals ...
-
Huge and variable diversity of episymbiotic CPR bacteria and DPANN archaea in groundwater ecosystemsbioRxiv - Microbiology 2020Quote: ... Aliquots of 5 μL were taken directly from the suspensions and deposited onto 300 mesh lacey carbon coated Cu-grids (Ted Pella, #01895) that had been treated by glow discharge within 24 hours ...
-
bioRxiv - Biophysics 2023Quote: ... the tip was brought in proximity to VLPs immobilized at a concentration of 5 µg/ml on Highly Oriented Pyrolytic Graphite (HOPG, Ted Pella, Inc.) The calibrated parameters included stiffness (59.4–82.0 pN/nm ...
-
bioRxiv - Physiology 2023Quote: ... Mounted samples were then sputter coated with 5 nm of gold-palladium (60 Au:40 Pd, Cressington Sputter Coater 208HR, model 8000-220, Ted Pella Inc). Images were taken using a Zeiss Supra 25 FESEM operating at 5 kV ...
-
bioRxiv - Biochemistry 2022Quote: ... A drop of 3-5 μL sample was applied to a glow discharged TEM grid (carbon supported film on 300 mesh Cu grids, Ted Pella, Ltd.). After 30 sec the excess liquid was blotted ...
-
Structural basis for Vipp1 membrane binding: From loose coats and carpets to ring and rod assembliesbioRxiv - Biophysics 2024Quote: Grids were prepared by applying 4 μL sample (with or without 5 nm gold fiducials) (Suppl. Table 1) to glow-discharged (PELCO easiGlow Glow Discharger, Ted Pella Inc.) Quantifoil grids (R1.2/1.3 Cu 200 mesh ...
-
bioRxiv - Biophysics 2024Quote: ... the experiments were performed with thin films of sample solution of unmodified liposomes and HCMP-liposomes (5 µL) transferred to a lacey supported grid in room temperature (Lacey Formvar/Carbon, 200 mesh, Cu; Ted Pella, Inc.). The thin solution films were prepared under controlled temperature and humidity conditions (97-99% ...
-
bioRxiv - Cell Biology 2021Quote: ... PDMS devices were cut from the master wafer and the inlets and outlets punched using a 1 mm biopsy punch (Harris Uni-Core, Ted Pella Inc. Redding, CA). Following treatment with oxygen plasma ...
-
bioRxiv - Cell Biology 2021Quote: A carbon coated formvar film supported by a 200-mesh copper grid (Plano, Wetzlar, Germany) was pretreated with glow discharging agent (Ted Pella, Redding, CA, USA) to create a hydrophilic surface ...
-
bioRxiv - Cell Biology 2022Quote: ... The carbon side of the grids were glow discharged for 45 s at 15 mA in a plasma cleaner (PELCO easiGlow, Ted Pella, Redding, CA, USA). The dish with grids was then sterilized in 5ml 70% ethanol for 10 min under UV ...
-
bioRxiv - Biochemistry 2021Quote: ... 150 mM NaCl and 2 μM Erlotinib) was placed on the continuous-carbon side of a glow-discharged copper grid (Ted Pella, Redding, CA, USA), and the excess sample was removed by wicking with filter paper after 1 min incubation ...
-
bioRxiv - Plant Biology 2023Quote: ... The resin was then polymerized at 4°C under UV light for 3 days using a PELCO UVC3 Cryo Chamber (Ted Pella, Redding, CA, USA). Serial semi-thin sections (0.25 μm thick ...
-
bioRxiv - Neuroscience 2023Quote: ... the processed brain hemisphere was sliced through a metal cast brain matrix for adult mouse (coronal, 1 mm interval, #15003, Ted Pella Inc, CA, USA). These brain slices between Bregma -3.4 to 2.7 were mapped radiologically and histologically against using Allen Mouse Brain Atlas (53) ...
-
bioRxiv - Bioengineering 2023Quote: Negatively stained samples for TEM were prepared by placing NP synthesized with 0-2000 μM of KM-met in MilliQ water on 400 mesh lacey carbon grids (Ted Pella, Redding, CA, USA) for 5 minutes ...
-
bioRxiv - Molecular Biology 2024Quote: ... The pellet was resuspended in the assembly buffer containing 150 µM IP6 and 3 µl of the resuspension was spotted onto EMS CF300-CU grids (Ted Pella Inc., Redding, CA) for 2 min ...
-
bioRxiv - Biochemistry 2023Quote: Quantifoil R1.2/1.3 Cu grids were glow-discharged in air for 15 s at 10 mA in a plasma cleaner (PELCO EasiGlow, Ted Pella, Inc., Redding, CA). Glow-discharged grids were prepared using Thermo Fisher Vitrobot Mark IV ...
-
bioRxiv - Neuroscience 2024Quote: ... Coronal brain slices including dorsal hippocampus (300-400 μm thick) were obtained by gluing the brain onto a vibratome stage (PELCO, EasiSlicer, Ted Pella Inc., CA, USA), submerged in a chamber containing chilled low-sodium/high-sucrose solution (250 mM sucrose ...
-
bioRxiv - Microbiology 2024Quote: ... 4 μL droplets of phage lysate (∼1010 PFU/mL) were placed on copper grids (300 mesh) coated with a carbon-coated formvar film (Ted Pella Inc., Redding, CA). The phage lysate was allowed to settle for 1 minute at room temperature and then dried using 3M filter paper ...
-
bioRxiv - Pathology 2024Quote: Silver-assisted LDI MSI was performed after silver sputter deposition for 30s at 80mA and 0.02 mbar of argon partial pressure on the RPE sections using a Cressington 308R sputter coater system (Ted Pella Inc. Redding, CA, USA) as previously described [13] ...
-
bioRxiv - Biochemistry 2024Quote: ... Four μl of sample with an OD260 of 7.5 were applied to the grids and vitrified at 4 °C and 100 % humidity using a Vitrobot Mk IV (Thermo Fisher Scientific) (blot 6s, blot force 3, 595 filter paper (Ted Pella Inc.)).