Labshake search
Citations for Ted Pella :
151 - 200 of 327 citations for 7 Diethylamino 3 ethylamino 2 methylphenoxazin 5 ium tetrachlorozincate 2 1 since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2022Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 μL of a 0.7 mg/ml Omicron Spike mixed with 0.16 mg/mL each of P5C3 and P2G3 Fab fragments (Final 3.2 uM Omicron Spike:1.5 uM P5C3:1.5 uM P2G3 ...
-
bioRxiv - Biophysics 2022Quote: ... a drop of 3 μl cell suspension was loaded on a glow-discharged (using a PELCO easiGlow Glow Discharger, Ted Pella Inc) grid (200 mesh gold 1.2/1.3 ...
-
bioRxiv - Genetics 2022Quote: ... and gently flattened with a large book for 3 minutes.Coverslips were sealed using clear nail polish (Ted Pella, Inc., Fisher Cat# NC1849418). Imaging was performed on a Nikon Eclipse Ti inverted spinning disk confocal microscope using a 100X 1.49 NA oil immersion objective lens ...
-
bioRxiv - Immunology 2023Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 µL of a sample containing 14 µM of the corresponding Spike and 25 µM ACE-Fc was applied to the glow-discharged grids ...
-
bioRxiv - Immunology 2023Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 µL of a sample containing 9 µM Omicron BA.1 and 16 µM mACE-Fc was applied to the glow-discharged grids ...
-
bioRxiv - Immunology 2022Quote: ... was performed by applying a drop (3 μl) of sample to a glow-discharged TEM grid (carbon supported film on 300 mesh Cu grids, Ted Pella, Ltd). After 30 sec the excess liquid was blotted ...
-
bioRxiv - Immunology 2023Quote: ... Quantifoil R1.2/1.3 Au 400 holey carbon grids were glow-discharged for 120 s at 15mA using a PELCO easiGlow device (Ted Pella, Inc.). 3.0 μL of a 0.35 mg/ml protein sample was applied to the glow-discharged grids ...
-
bioRxiv - Pathology 2023Quote: Lung tissue specimens 1×1×1 mm in size were fixed in 2.5% glutaraldehyde (Ted Pella, US) in cacodylate buffer ...
-
bioRxiv - Biochemistry 2020Quote: ... 5 μl solution was spotted onto freshly glow-discharged carbon-coated electron microscopy grids (Ted Pella, Redding, CA). Grids were rinsed three times with 5 μl distilled water after 3 min incubation ...
-
bioRxiv - Synthetic Biology 2021Quote: Thiol-labeled prey-oligo (41 μM) was mixed with phosphine-treated 5 nm AuNP (200 nM, Ted Pella) in 50 mM NaCl ...
-
bioRxiv - Bioengineering 2022Quote: ... DOL samples (5 μL) were deposited on a glow-discharged formvar/carbon coated copper grid (Ted Pella, Inc.) for 1 minute ...
-
bioRxiv - Microbiology 2023Quote: ... 5 μL of filtered φNCKUH-21-induction supernatant was dropped on the TEM grid (Ted Pella Inc., USA) and incubated for 1 min at 25°C ...
-
bioRxiv - Plant Biology 2021Quote: ... Coverslips were mounted on 13mm aluminum stubs using double-sided carbon adhesive and sputter coated with 3 nm of gold-palladium alloy (60 Au:40 Pd, Cressington Sputter Coater 208HR, model 8000-220, Ted Pella, Redding, CA). Images were taken using a Zeiss Supra 25 FESEM operating at 5 kV ...
-
bioRxiv - Developmental Biology 2023Quote: ... Dried embryos were sputter coated with iridium to a thickness of 3 nm (Cressington 208 HR Sputter Coater, Ted Pella, Redding, CA, USA) and examined in a scanning electron microscope (FEI Quanta 200 FEG SEM ...
-
bioRxiv - Biochemistry 2024Quote: ... Four μl of sample with an OD260 of 7.5 were applied to the grids and vitrified at 4 °C and 100 % humidity using a Vitrobot Mk IV (Thermo Fisher Scientific) (blot 6s, blot force 3, 595 filter paper (Ted Pella Inc.)).
-
bioRxiv - Biochemistry 2020Quote: Samples (5 μl) were applied directly onto 400-mesh copper TEM grids with Formvar/Carbon support films (Ted Pella), which were glow-discharged (PELCO easiGlow ...
-
bioRxiv - Cancer Biology 2021Quote: ... 5 μL of purified EV sample was applied to a freshly glow discharged (Pelco Easiglow, Ted Pella Redding CA) carbon coated TEM grid (Electron Microscopy Sciences ...
-
bioRxiv - Molecular Biology 2024Quote: ... The pellet was resuspended in the assembly buffer containing 150 µM IP6 and 3 µl of the resuspension was spotted onto EMS CF300-CU grids (Ted Pella Inc., Redding, CA) for 2 min ...
-
bioRxiv - Plant Biology 2023Quote: ... The resin was then polymerized at 4°C under UV light for 3 days using a PELCO UVC3 Cryo Chamber (Ted Pella, Redding, CA, USA). Serial semi-thin sections (0.25 μm thick ...
-
bioRxiv - Neuroscience 2021Quote: ... 400 mesh copper grids covered by a Formvar/Carbon film (5-10 nm) were obtained from Ted Pella (Redding, CA) and 2% aqueous uranyl acetate was purchased from Electron Microscopy Sciences (Hatfield ...
-
bioRxiv - Biochemistry 2023Quote: ... 3.5 µL of a γ-TuRC aliquot from sucrose gradient was applied to Lacey Carbon Support Film grid with an Ultrathin Carbon Film (< 3 nm) (TED PELLA, INC, Prod No. 01824), plasma cleaned for 30 s ...
-
bioRxiv - Biochemistry 2023Quote: ... 1.2 µL of native γ-TuRC aliquot from the sucrose gradient fraction was applied to a Lacey Carbon Support Film grid with an Ultrathin Carbon Film (< 3 nm) (TED PELLA, INC, Prod No. 01824) or Quantifoil R2/2 300-square-mesh copper grids coated with continuous carbon film ...
-
bioRxiv - Developmental Biology 2021Quote: ... post-fixed for 1 h with 1% osmium tetroxide (Cat#18451, Ted Pella), and subject to a second fixation for 30 min with thiocarbohydrazide (Cat#88535 ...
-
bioRxiv - Genetics 2024Quote: ... a freshly combined 1:1 mix of 16% EM grade paraformaldehyde (Ted Pella) and 2x WHOoPASS buffer (Gillies et al ...
-
bioRxiv - Biochemistry 2019Quote: ... Samples (5 µl) were then directly applied onto 400-mesh copper TEM grids with support films of Formvar/Carbon (Ted Pella, distributed by Getter Group Bio Med ...
-
bioRxiv - Physiology 2021Quote: ... The coverslips with dried samples were glued to aluminum stubs and sputter coated with 5 nm platinum using a Cressington 208HR (Ted Pella) rotary sputter coater ...
-
bioRxiv - Biochemistry 2021Quote: ... 3.5 μl of the protein complex was applied onto glow discharged formvar/carbon coated 300 mesh copper grids (PELCO, Ted Pella) and blotted off after adsorption of the sample for 1 min using a filter paper ...
-
bioRxiv - Cell Biology 2020Quote: ... 5 μl of dialyzed material was pipetted onto a glow-discharged Lacey holey carbon grid (Carbon Cu 300 mesh, Ted Pella), blotted for 3 s (blot force −15 ...
-
bioRxiv - Cell Biology 2024Quote: ... The coverslips with dried samples were glued to aluminum stubs and sputter coated with 5 nm platinum using a Cressington 208HR (Ted Pella) rotary sputter coater ...
-
bioRxiv - Biochemistry 2024Quote: ... with 1.5x molar excess dsRNA with or without 5mM nucleotide (ATP or ATPγS) and 5% glycerol was applied to the grid and blotted with filter paper (595 Filter Paper, Ted Pella, Inc.) for 5 seconds using an Mk ...
-
bioRxiv - Cell Biology 2020Quote: ... 150 mM NaCl and 2 mM MgCl2 for 20 min at room temperature and was adsorbed for 5 min onto a 200 mesh carbon coated Copper grid (Ted Pella, Inc.). The grid was stained with a drop of 2% freshly prepared uranyl acetate (MP Biomedicals ...
-
bioRxiv - Microbiology 2021Quote: ... 5 μl of fixed viruses were added onto glow discharged carbon coated 400 mesh Cu/Rh grid (Ted Pella Inc., Redding, CA), and stained with 1% aqueous uranyl acetate (Polysciences ...
-
Huge and variable diversity of episymbiotic CPR bacteria and DPANN archaea in groundwater ecosystemsbioRxiv - Microbiology 2020Quote: ... Aliquots of 5 μL were taken directly from the suspensions and deposited onto 300 mesh lacey carbon coated Cu-grids (Ted Pella, #01895) that had been treated by glow discharge within 24 hours ...
-
bioRxiv - Biochemistry 2022Quote: ... A drop of 3-5 μL sample was applied to a glow discharged TEM grid (carbon supported film on 300 mesh Cu grids, Ted Pella, Ltd.). After 30 sec the excess liquid was blotted ...
-
bioRxiv - Biophysics 2023Quote: ... the tip was brought in proximity to VLPs immobilized at a concentration of 5 µg/ml on Highly Oriented Pyrolytic Graphite (HOPG, Ted Pella, Inc.) The calibrated parameters included stiffness (59.4–82.0 pN/nm ...
-
bioRxiv - Physiology 2023Quote: ... Mounted samples were then sputter coated with 5 nm of gold-palladium (60 Au:40 Pd, Cressington Sputter Coater 208HR, model 8000-220, Ted Pella Inc). Images were taken using a Zeiss Supra 25 FESEM operating at 5 kV ...
-
bioRxiv - Cancer Biology 2020Quote: ... the solution was vortexed and a 5 μL droplet of the solution was placed on a freshly plasma-cleaned copper/formvar/carbon grid (400 mesh, Ted Pella, Redding, CA). After 2 min ...
-
bioRxiv - Cell Biology 2022Quote: ... were cultivated in 5% CO2 at 37°C on type I rat-tail collagen-coated round glass coverslips (12 mm diameter, Ted Pella, Redding, CA) or inserts in 24-well plates (0.4 μm polyester membrane ...
-
bioRxiv - Microbiology 2020Quote: ... or BMECs were cultivated in 5% CO2 at 37°C on type I rat-tail collagen-coated round glass coverslips (12 mm diameter, Ted Pella, Redding, CA) until 90% confluence ...
-
bioRxiv - Molecular Biology 2023Quote: ... were cultivated in 5% CO2 at 37°C on type I rat-tail collagen-coated round glass coverslips (12 mm diameter, Ted Pella, Redding, CA) or inserts in 24-well plates (0.4 μm polyester membrane ...
-
bioRxiv - Microbiology 2023Quote: ... and bloc-stained for 1 h with 1% aqueous uranyl acetate (Ted Pella Inc., Redding, CA). Subsequently ...
-
bioRxiv - Synthetic Biology 2021Quote: ... 1 cm diameter (Ted Pella, Inc) in a 24-well plate ...
-
bioRxiv - Synthetic Biology 2021Quote: ... 1 cm diameter (Ted Pella, Inc) in a 24-well plate ...
-
bioRxiv - Synthetic Biology 2021Quote: ... 1 cm diameter (Ted Pella, Inc) in a 24-well plate ...
-
bioRxiv - Immunology 2021Quote: ... then incubated in a 1:1 mix of propylene oxide and Eponate resin (Ted Pella, Redding, CA) overnight at room temperature on a gentle rotator ...
-
bioRxiv - Neuroscience 2020Quote: Negatively stained specimens for TEM were prepared by applying 5 μL of protein sample to hydrophilic 400 mesh carbon-coated Formvar support films mounted on copper grids (Ted Pella, Inc., 01702-F). Samples were allowed to adhere for 4 min ...
-
bioRxiv - Biochemistry 2022Quote: ... vitrified specimens are prepared by applying 2.5 µL drop of the NPs solution on a copper grid coated with a perforated lacy carbon 300 mesh (Ted Pella Inc, Canada, USA), then blotted with a filter paper to form a thin liquid film ...
-
bioRxiv - Biophysics 2024Quote: Negatively stained specimens for TEM were prepared by applying 5 μL of sample to hydrophilic 400-mesh carbon-coated Formvar support films mounted on copper grids (Ted Pella, Inc., cat# 01702-F). The samples were allowed to adhere for 4 min ...
-
bioRxiv - Bioengineering 2022Quote: ... on aluminium tabs (Ted Pella, 16084-1), and coated with 4 nm gold with Leica EM ACE600 sputter coater ...
-
bioRxiv - Cell Biology 2023Quote: ... treated with 1% osmium tetroxide (Ted Pella), and critical point dried (CPD 030 ...