Labshake search
Citations for Ted Pella :
51 - 100 of 308 citations for Genz 644282 CAS 529488 28 6 99% since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2024Quote: Protein samples (3–6 μL, 0.05–0.1 mg/mL) were applied to glow-discharged 300-mesh copper grids (Ted Pella) and stained with uranyl formate (0.75–2% (w/v)) ...
-
bioRxiv - Immunology 2021Quote: ... and polymerized in Eponate 12 resin (Ted Pella Inc., Redding, CA, USA). Sections of ~70 nm thickness were cut using a Leica Ultracut S ultramicrotome and stained with 5% uranyl acetate and 2% lead citrate prior to imaging ...
-
bioRxiv - Cell Biology 2020Quote: ... Carbon or formvar+carbon coated copper grids (Ted Pella, Redding, CA, USA) were first incubated for 30 s with 3 μL TMV (0.01-0.02 mg/ml dispersion in phosphate-buffered saline) ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 pyruvate) using vibratome (Vibratome 1000 plus, Ted Pella Inc., CA, USA). Slices were transferred and kept for 1 hour at room temperature in artificial cerebrospinal fluid (ACSF ...
-
bioRxiv - Bioengineering 2021Quote: Carbon film on 300 mesh copper discs (Ted Pella, Redding, CA, USA) were prepared for increased hydrophilicity by glow discharge at 30 mA for 30 seconds on a glass slide ...
-
bioRxiv - Microbiology 2021Quote: ... Bacterial samples were fixed with 1% glutaraldehyde (Ted Pella Inc., Redding CA) and allowed to absorb onto freshly glow discharged formvar/carbon-coated copper grids for 10 min ...
-
bioRxiv - Cell Biology 2022Quote: ... All electron microscopy supplies were from Pelco (Ted Pella Inc. CA, USA). All other chemical reagents were of analytical grade and were purchased from ICN ...
-
bioRxiv - Microbiology 2023Quote: ... 200 mesh formvar/carbon-coated copper grids (Ted Pella Inc., Redding CA) were coated with 50µg/ml poly-L-lysine (Sigma ...
-
bioRxiv - Genomics 2023Quote: ... cells were cross-linked with 1% formaldehyde (Ted Pella Inc., Redding, CA) for 10 min at room temperature ...
-
bioRxiv - Neuroscience 2023Quote: ... then sliced with a Pelco easiSlicer vibratome (Ted Pella Inc., Redding, CA) into 50 μm slices ...
-
bioRxiv - Cell Biology 2024Quote: ... using a microwave tissue processor (Pelco Biowave, Ted Pella, Inc, Redding, CA) as previously reported100 ...
-
bioRxiv - Cell Biology 2024Quote: ... mounted on 12 mm Al stubs (Ted Pella, Redding, CA, cat# 16111) using double sticky carbon tabs ...
-
bioRxiv - Microbiology 2023Quote: Biofilms were grown on squares of ACLAR® (Ted Pella, Redding, CA) substrate ...
-
bioRxiv - Bioengineering 2023Quote: ... The fast-drying silver paint (16040-30, Ted Pella Inc., CA, USA) was injected through the ground via holes at the gold-plated ground pad to electrically short the p-substrate of the CMOS interface IC to the PCB ground ...
-
bioRxiv - Physiology 2024Quote: ... the samples were embedded in Eponate 12 resin (Ted Pella, Redding, CA). After the polymerization of Epon ...
-
bioRxiv - Microbiology 2022Quote: ... then infiltrated and embedded in Spurr’s resin (Ted Pella, Redding, CA, USA). Thin (70 nm ...
-
bioRxiv - Neuroscience 2023Quote: ... 40°C using the PELCO Biowave (Ted Pella, Inc., Redding, CA, USA) followed by a 4°C overnight incubation for 72 hours ...
-
bioRxiv - Bioengineering 2024Quote: On large (75.2 × 50.4 × 1 mm) microscope coverslips (Ted Pella, Redding CA), cell-adhesive patterns were produced by photoablating thin (150 nm ...
-
bioRxiv - Immunology 2024Quote: ... followed by embedding with Eponate-12 Resin (Ted Pella, Redding, CA, USA) and cut into 100 nm sections.
-
bioRxiv - Microbiology 2024Quote: ... and stained with 1% aqueous uranyl acetate (Ted Pella Inc., Redding CA) for 1 min ...
-
bioRxiv - Microbiology 2024Quote: A purified LUJV spike sample (3.5 μl) was applied on glow-discharged (6 s, 12 mA; Pelco easiGlow, Ted Pella) graphene oxide Quantifoil copper grids ...
-
bioRxiv - Bioengineering 2023Quote: Gel purified structures (around 1 nM) were used for AFM imaging by adsorbing 6 µl of sample onto freshly cleaved mica (V1, Ted Pella). After three minutes of incubation ...
-
bioRxiv - Developmental Biology 2020Quote: ... infiltrated and then polymerized in Eponate 12 resin (Ted Pella, Inc., Redding, CA). 50 nm sections were cut with a Leica UCT ultramicrotome (Leica Microsystems ...
-
bioRxiv - Neuroscience 2020Quote: ... the brains were impregnated with Glycol Methacrylate (GMA, Ted Pella Inc., Redding, CA) and embedded in a vacuum oven.
-
bioRxiv - Bioengineering 2022Quote: ... Ø12.7mm x 9mm pin height (Catalog No. 16202, Ted Pella, Inc., Redding, CA), sputter-coated with a 5 nm thick gold layer and imaged with a FEI Nova NanoSEM 430 SEM at the University of Florida Nanoscale Research Facility.
-
REV-ERBα mediates complement expression and circadian regulation of microglial synaptic phagocytosisbioRxiv - Neuroscience 2020Quote: ... and sections were picked up on a Si wafer (Ted Pella, Redding, CA). Images were acquired on a Zeiss Merlin FE-SEM using a solid state backscatter detector (8kV ...
-
bioRxiv - Neuroscience 2020Quote: ... All embedding steps were performed using the Biowave Pro + (Ted Pella, Redding, CA). The tissue was processed using 2% osmium-1.5% potassium ferrocyanide ...
-
bioRxiv - Neuroscience 2020Quote: ... Then incubated with 10 nm immunogold-conjugated secondary antibodies (Ted Pella, Redding, CA) in 1% NGS in TBST with 0.5% polyethylene glycol (20,000 MW) ...
-
bioRxiv - Microbiology 2021Quote: ... and sputter coated with carbon (Cressington 208c, Ted Pella Inc., Redding, CA, USA). Images were obtained using a JEOL JSM-7600F scanning electron microscope at an accelerating voltage of 2 kV or a JEOL JSM-6490LV scanning electron microscopy at an accelerating voltage of 15 kV (JEOL USA Inc. ...
-
bioRxiv - Biophysics 2020Quote: ... solution was pipetted onto a freshly cleaved mica surface (Ted Pella, Redding, CA) and incubated for 20 minutes ...
-
bioRxiv - Neuroscience 2020Quote: ... then dehydrated and embedded in Eponate 12 resin (Ted Pella Inc., Redding, CA). Ultra-thin sections were cut at 1-μm thick ...
-
bioRxiv - Microbiology 2022Quote: ... and block stained with 1% aqueous uranyl acetate (Ted Pella Inc., Redding, CA) for 1 hr ...
-
bioRxiv - Biophysics 2024Quote: ... following glow discharging (PELCO easiGlow Glow Discharge Cleaning System, Ted Pella, CA, USA) for 1 min at 15 mA ...
-
bioRxiv - Biophysics 2024Quote: ... 400 mesh electron microscopy grids (01754-F F/C, Ted Pella, Redding CA) for 1 minute ...
-
bioRxiv - Immunology 2022Quote: ... that had been freshly glow discharged with PELCO easiGLOW (Ted Pella, Redding, CA) for 1 min at 20 mA ...
-
bioRxiv - Bioengineering 2023Quote: ... Ø12.7mm x 9mm pin height (Catalog No. 16202, Ted Pella, Inc., Redding, CA). The samples were then dried in a chemical hood for 48 hours and sputter-coated with 10 nm of Au prior to imaging on a Phenom Pure benchtop SEM.
-
bioRxiv - Physiology 2023Quote: ... samples were postfixed with 1% osmium tetroxide (Ted Pella Inc., Redding, CA, USA) and then en bloc stained with 1% aqueous uranyl acetate (Ted Pella Inc. ...
-
bioRxiv - Physiology 2023Quote: ... and embedded in Eponate 12 epoxy resin (Ted Pella Inc., Redding, CA, USA). Ultrathin sections (70 nm ...
-
bioRxiv - Cell Biology 2022Quote: ... infiltrated and then polymerized in Eponate 12 resin (Ted Pella, Inc, Redding, CA). Serial 50 nm sections were cut with a Leica UCT ultramicrotome using a Diatome diamond knife ...
-
bioRxiv - Systems Biology 2023Quote: ... and embedded in Eponate 12 epoxy resin (Ted Pella Inc., Redding, CA, USA). Ultrathin sections (70 nm ...
-
bioRxiv - Cell Biology 2024Quote: ... Microwave fixation was carried out in a BioWave Pro (Ted Pella, Redding CA). Block preparation for SBFSEM followed Lippens et al ...
-
bioRxiv - Microbiology 2024Quote: ... All steps were performed using the Pelco Biowave pro+ (Ted Pella, Redding, CA). 70 nm ultrathin sections were picked up on copper grids and post-stained with 5% aqueous uranyl acetate and Reynolds lead citrate ...
-
bioRxiv - Neuroscience 2024Quote: ... tissue was embedded in Pure Eponate 12 resin (Ted Pella Inc., Redding, CA). The tissue was cut into ultra-thin sections ...
-
bioRxiv - Bioengineering 2024Quote: ... Lacey formvar/carbon-coated copper grid (cat. #01883-F, Ted Pella, Redding CA), hyaluronic acid (HA ...
-
bioRxiv - Microbiology 2020Quote: ... and excess liquid removed by blotting for 6 s with a blotting force of −1 using vitrobot filter paper (grade 595, Ted Pella Inc.) at 4.5 °C ...
-
bioRxiv - Microbiology 2020Quote: ... and excess liquid removed by blotting for 6 s with a blotting force of −1 using vitrobot filter paper (grade 595, Ted Pella Inc.) at 4.5 ºC ...
-
bioRxiv - Evolutionary Biology 2020Quote: Peptide solutions were adsorbed onto formvar/carbon-coated nickel grids (TED PELLA, CA, USA) in water ...
-
bioRxiv - Biochemistry 2021Quote: Ultrathin carbon on lacey carbon support film grids (400 mesh, Ted Pella, Redding, CA) were briefly glow‐discharged and floated on droplets of fibril solutions ...
-
bioRxiv - Synthetic Biology 2020Quote: ... were placed in a Pelco easiGlow glow discharger (Ted Pella Inc., Redding, CA, USA) and an atmosphere plasma was introduced on the surface of the grids for 30 seconds with a current of 15 mA at a pressure of 0.24 mbar ...
-
bioRxiv - Neuroscience 2021Quote: ... samples were microwaved in a BioWave Pro Pelco (Ted Pella, Inc, Redding, CA, USA) using the following fixation protocol ...