Labshake search
Citations for Ted Pella :
51 - 100 of 304 citations for 6 Chloro 4 hydroxy 2 methyl 2H thieno 2 3 e 1 2 thiazine 3 carboxylic acid methyl ester 1 1 dioxide since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2021Quote: ... using carbon tape (16084-3, TED PELLA, Redding, CA). To increase conduction ...
-
bioRxiv - Microbiology 2019Quote: ... microdrops of protein aggregate suspensions were deposited for 2 min on silicon wafers (Ted Pella Inc.), air-dried and observed in a nearly native state under a field emission scanning electron microscope (FESEM ...
-
bioRxiv - Biophysics 2022Quote: ... to glow discharge Lacey carbon cryoEM grids with a 2 nm continuous carbon film (Ted Pella) for 45 seconds ...
-
bioRxiv - Microbiology 2022Quote: ... Samples were washed in sodium cacodylate buffer and postfixed in 2% osmium tetroxide (Ted Pella, Inc) 1 hour at room temperature ...
-
bioRxiv - Microbiology 2022Quote: ... parasites were fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Ted Pella Inc., Redding, CA or other source) in 100 mM sodium cacodylate buffer ...
-
bioRxiv - Molecular Biology 2023Quote: 2 nm thick carbon films supported on Quantifoil holey carbon grids (Ted Pella 668-300-Cu) were imaged with a room-temperature specimen holder in order to make quantitative measurements of the microscope’s CTF envelope as a function of the diameter of the electron beam hole in the dummies ...
-
bioRxiv - Biophysics 2021Quote: ... that had been glow-discharged for 2 min using a Pelco easiGlow (Ted Pella, Inc, Redding CA). Finally ...
-
bioRxiv - Immunology 2023Quote: Five µL of AC3 was adsorbed to a carbon coated copper grid for 2 minutes (Ted Pella), remaining sample wicked out ...
-
bioRxiv - Microbiology 2021Quote: ... Membranes were air dried and mounted with a 4:1 mixture of Citifluor™ (Ted Pella, Inc.) and Vectashield® (Vector Laboratories Inc. ...
-
bioRxiv - Plant Biology 2023Quote: ... The resin was then polymerized at 4°C under UV light for 3 days using a PELCO UVC3 Cryo Chamber (Ted Pella, Redding, CA, USA). Serial semi-thin sections (0.25 μm thick ...
-
bioRxiv - Bioengineering 2023Quote: Gel purified structures (around 1 nM) were used for AFM imaging by adsorbing 6 µl of sample onto freshly cleaved mica (V1, Ted Pella). After three minutes of incubation ...
-
bioRxiv - Biochemistry 2020Quote: 400M copper grids coated with lacey carbon and a 2-nm thin layer of carbon (Ted Pella Inc.) were glow discharged with 20 mA current with negative polarity for 60 s in a PELCO easiGlow glow discharge unit ...
-
bioRxiv - Microbiology 2022Quote: ... Samples were washed in sodium cacodylate buffer at RT and postfixed in 2% osmium tetroxide (Ted Pella Inc) for 1h at RT ...
-
Photoreceptor disc incisures form as an adaptive mechanism ensuring the completion of disc enclosurebioRxiv - Cell Biology 2023Quote: ... placed on copper grids and counterstained with 2% uranyl acetate and 3.5% lead citrate (Ted Pella, Redding, CA). Samples were imaged on a JEM-1400 electron microscope (JEOL ...
-
bioRxiv - Cell Biology 2023Quote: Grids for cryoEM were prepared using 200 mesh Quantifoil Cu EM grids with 2 μm holes (Ted Pella). Grids were glow discharged for 1 minute in negative ion mode ...
-
bioRxiv - Developmental Biology 2021Quote: ... post-fixed for 1 h with 1% osmium tetroxide (Cat#18451, Ted Pella), and subject to a second fixation for 30 min with thiocarbohydrazide (Cat#88535 ...
-
bioRxiv - Microbiology 2023Quote: ... 5 minutes in 1:1 absolute ethanol (Thermo) to hexamethyldisilazane (HMDS, Ted Pella), and 5 minutes in 100% HMDS ...
-
bioRxiv - Genetics 2024Quote: ... a freshly combined 1:1 mix of 16% EM grade paraformaldehyde (Ted Pella) and 2x WHOoPASS buffer (Gillies et al ...
-
bioRxiv - Microbiology 2020Quote: ... and excess liquid removed by blotting for 6 s with a blotting force of −1 using vitrobot filter paper (grade 595, Ted Pella Inc.) at 4.5 °C ...
-
bioRxiv - Microbiology 2020Quote: ... and excess liquid removed by blotting for 6 s with a blotting force of −1 using vitrobot filter paper (grade 595, Ted Pella Inc.) at 4.5 ºC ...
-
bioRxiv - Microbiology 2021Quote: ... R2/2 (reference: Au G200F1) were glow-discharged using a PELCO EasiGlow™ (Ted Pella, Inc., Redding, CA, USA). Prior deposition on the grids ...
-
bioRxiv - Neuroscience 2020Quote: ... the decalcified cochleae were washed twice in 0.15 M cacodylate (pH 7.4) for 30 min each and sequentially immersed in 2 % OsO4 (Ted Pella), 2.5 % ferrocyanide (Sigma) ...
-
bioRxiv - Cell Biology 2023Quote: ... placed on copper grids and counterstained with 2% uranyl acetate and 3.5% lead citrate (19314; Ted Pella, Redding, CA). The samples were imaged on a JEM-1400 electron microscope (JEOL ...
-
bioRxiv - Cell Biology 2023Quote: ... Sections were placed on copper grids and stained with 2% uranyl acetate and 3.5% lead citrate (19314; Ted Pella). Images were acquired at 2.18 nm/px with a LEOL JEM-1400 TEM equipped with a 16-Mpixel Gatan camera using SerialEM software ...
-
bioRxiv - Neuroscience 2021Quote: ... 3 pyruvate) using vibratome (Vibratome 1000 plus, Ted Pella Inc., CA, USA). Slices were transferred and kept for 1 hour at room temperature in artificial cerebrospinal fluid (ACSF ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... filters were cut into ~1/8 sections and placed onto an analysis bullet using adhesive and conductive tabs (#16084–6, Ted Pella, Redding, California) and sputter coated with ~5 nm gold particles ...
-
bioRxiv - Biochemistry 2021Quote: ... Vitrified samples of all S protein samples were prepared by first glow discharging Quantifoil R1.2/1.3 Cu mesh 200 holey carbon grids for 30 seconds using a Pelco easiGlow glow discharge unit (Ted Pella) and then applying 1.8 μL of protein suspension to the surface of the grid at a temperature of 10°C and a humidity level of >98% ...
-
bioRxiv - Microbiology 2022Quote: ... Samples were washed in sodium cacodylate buffer at room temperature and post-fixed in 2% osmium tetroxide (Ted Pella Inc) for 1 hr at room temperature ...
-
bioRxiv - Biophysics 2023Quote: ... Quantifoil Au 1.2/1.3 (300 mesh) grids were glow-discharged (12 mA for 50 s) using a PELCO easiGlo instrument (Ted Pella) before applied 2.5 μL of concentrated VMAT2 sample ...
-
bioRxiv - Genomics 2023Quote: ... washed three times with 0.1 M PBS at 4 °C and then fixed with 1% osmium tetroxide (Ted Pella, USA) in PBS for 1.5 h ...
-
bioRxiv - Microbiology 2023Quote: ... coverslips were washed once with PBS and fixed in 4% paraformaldehyde (Ted Pella Inc., 18505, diluted in 1 x PBS) for 10 min at room temperature ...
-
bioRxiv - Microbiology 2023Quote: ... and bloc-stained for 1 h with 1% aqueous uranyl acetate (Ted Pella Inc., Redding, CA). Subsequently ...
-
bioRxiv - Synthetic Biology 2021Quote: ... 1 cm diameter (Ted Pella, Inc) in a 24-well plate ...
-
bioRxiv - Synthetic Biology 2021Quote: ... 1 cm diameter (Ted Pella, Inc) in a 24-well plate ...
-
bioRxiv - Synthetic Biology 2021Quote: ... 1 cm diameter (Ted Pella, Inc) in a 24-well plate ...
-
bioRxiv - Cancer Biology 2022Quote: ... which were prepared by biopsy punch (3 mm in diameter, Ted Pella, Sweden). 20 μl of conditioned media was added into the loading chambers followed by incubation for 12 hours at 4 °C ...
-
bioRxiv - Neuroscience 2020Quote: ... The PrL tissue from the left hemisphere was collected using a 2 mm micropunch (Harris Uni-Core, Ted Pella, Redding, CA) as shown on Fig ...
-
bioRxiv - Molecular Biology 2022Quote: ... was spotted on a Quantifoil R2/2 200 Mesh holey carbon grids which were glow discharged for 10s using the PELCO easiGlow system (Ted Pella). Grids were flash-frozen in liquid ethane using Vitrobot Mark IV (FEI ...
-
bioRxiv - Biophysics 2023Quote: UltrAuFoil R2/2 grids were glow discharged at 30 mA for 60 seconds using a Pelco easiGlow (Ted Pella, Inc., USA) system ...
-
bioRxiv - Immunology 2021Quote: ... then incubated in a 1:1 mix of propylene oxide and Eponate resin (Ted Pella, Redding, CA) overnight at room temperature on a gentle rotator ...
-
bioRxiv - Neuroscience 2021Quote: ... A 2 µL sample was placed on an ultrathin lacey carbon grid (Formvar/Carbon 200 mesh, Copper, Ted Pella Inc., Redding, California) and allowed to sit for 5 min before removal of the droplet via wicking with a Chemwipe and vacuum drying.
-
bioRxiv - Neuroscience 2021Quote: ... Semithin (500 nm) sections were cut by using a Leica EM UC6 microtome and then incubated with 2% toluidine blue (#19451, Ted Pella Inc.) at 100°C for 2 min ...
-
bioRxiv - Immunology 2021Quote: ... Grids were rinsed (4x 10’) with PBS then labeled for 2 hrs with 10 nm gold conjugated goat anti-mouse secondary antibody (Ted Pella, Inc.). Grids were again rinsed (4x 10’ ...
-
bioRxiv - Cell Biology 2020Quote: ... a 23 ± 2 nm silver layer was deposited onto the sections using a Cressington 308R sputter coater (Ted Pella Inc, Redding, CA) as per the protocol detailed in Dufresne et al 2013 (26) ...
-
bioRxiv - Neuroscience 2024Quote: Semithin sections (500 nm) were cut using a Leica EM UC6 microtome and incubated with 2% toluidine blue (Cat#194541, Ted Pella Inc.) at 100℃ for 2 minutes ...
-
bioRxiv - Developmental Biology 2019Quote: ... The samples were then fixed for 3 minutes using the Pelco Biowave (Ted Pella), followed by overnight fixation at 4°C ...
-
bioRxiv - Developmental Biology 2023Quote: ... 3×10 minutes and dehydrated using a Pelco BioWave Pro Microwave (Ted Pella, Inc.) as follows ...
-
bioRxiv - Bioengineering 2022Quote: ... on aluminium tabs (Ted Pella, 16084-1), and coated with 4 nm gold with Leica EM ACE600 sputter coater ...
-
bioRxiv - Cell Biology 2023Quote: ... treated with 1% osmium tetroxide (Ted Pella), and critical point dried (CPD 030 ...
-
bioRxiv - Microbiology 2022Quote: Samples of dialyzed AAV4 VLP (2 µL at 0.33 mg/ml) were placed upon glow-discharged EM grids (copper grids with lacey carbon, Ted Pella cat. no. 01824) and allowed to adhere for 2 min ...