Labshake search
Citations for Harvard Apparatus :
251 - 300 of 367 citations for glass bottom plate since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2022Quote: ... DV: 4.6 mm from the brain surface) using a backfilled glass needle and syringe pump (PHD Ultra, Harvard Apparatus). Skin was either sutured for one week recovery before implanting optic fiber (Doric ...
-
bioRxiv - Neuroscience 2020Quote: ... The virus was injected with a glass pipette (10 – 20 μm tip diameter) using a syringe pump (Harvard Apparatus). To observe the OFC axons in V1 ...
-
bioRxiv - Neuroscience 2022Quote: ... Recording electrodes (3–6 MΩ) were pulled from borosilicate glass capillaries (outer diameter, 1.5 mm; 0.32 mm wall thickness; Harvard Apparatus). The glass microelectrodes were filled with a low Cl- internal solution containing the following (in mM) ...
-
bioRxiv - Neuroscience 2022Quote: ... Patch pipettes were made from thick-walled borosilicate glass capillaries (0.86 mm internal diameter, 1.5 mm outer diameter, Harvard Apparatus) using a two-step vertical puller (Narishige ...
-
bioRxiv - Neuroscience 2022Quote: ... were recorded (sampling rate 10 kHz) in CA1 using glass borosilicate patch pipettes (∼1-3MΩ, Harvard Apparatus, Kent, UK) and a Multiclamp 700B (Molecular Devices ...
-
bioRxiv - Cell Biology 2020Quote: ... Suspended cells in a glass syringe were introduced into the channel by a syringe pump (Harvard apparatus 11 Elite) at a fixed volumetric flow rate ...
-
bioRxiv - Neuroscience 2021Quote: ... were exposed for recordings by removing the overlaying glial sheath using a glass pipette (GC100TF-10, Harvard Apparatus, UK) filled with 1% (w/v ...
-
bioRxiv - Neuroscience 2021Quote: Patch clamp recording pipettes (resistance:4-9 MΩ) were made from borosilicate glass capillaries (1.5 outer diameter x 0.86 inner diameter; Harvard Apparatus) and back-filled with internal solution of the following composition ...
-
bioRxiv - Neuroscience 2022Quote: ... Patch pipettes (resistance: 2-8 MΩ) were prepared from borosilicate glass capillaries (1.5 outer diameter x 0.86 inner diameter; Harvard Apparatus) using a Flaming/Brown micropipette puller (P-97 ...
-
bioRxiv - Developmental Biology 2023Quote: ... The left eye of E14.5 embryos was injected with 2 μg·μL-1 of DNA using an elongated glass capillary (Harvard apparatus) with different plasmid solutions ...
-
bioRxiv - Molecular Biology 2023Quote: ... or control oligomer and 0.5 ng of pCS2-eGFP plasmid were microinjected into both animal blastomeres using a 1.0 mm outer diameter (OD) x 0.5 mm internal diameter (ID) glass capillary injection needle (Harvard Apparatus). At stage 19 embryos were selected based on GFP expression in the entire central nervous system as a proxy of successful AL inhibitors delivery ...
-
bioRxiv - Neuroscience 2022Quote: Extracellular single-unit recordings were made with borosilicate glass electrodes (tip diameter 1.0 – 1.5 μm, in situ resistance 10 – 25 MΩ; GC120F-10, Harvard Apparatus) filled with saline solution (0.5 M NaCl ...
-
bioRxiv - Neuroscience 2022Quote: Pipettes were pulled from standard-walled filament-containing borosilicate glass capillaries (Harvard Apparatus, 1.5 mm OD, 0.85 mm ID) using a vertical micropipette puller (PC-10 or PC-100 ...
-
bioRxiv - Neuroscience 2023Quote: ... Extracellular recording electrodes were constructed from 1.5 mm outer diameter / 1.17 mm inner diameter borosilicate glass tubing (Harvard Apparatus) using a vertical electrode puller (Narishige) ...
-
bioRxiv - Neuroscience 2023Quote: ... The solution was delivered at a rate of 0.25 µl/min using a 0.1 ml glass-tight Hamilton syringe driven by a digital infusion pump (Harvard Apparatus). The injection volume per session was 4.5-5 µl of 10 mg/ml of THIP for monkey 1 (dPul in the left hemisphere ...
-
bioRxiv - Neuroscience 2022Quote: ... Recordings were made using borosilicate glass pipettes (3-6 MΩ; 0.6 mm inner diameter; 1.2 mm outer diameter; Harvard Apparatus). All signals were amplified using Multiclamp 700B (Molecular Devices) ...
-
bioRxiv - Bioengineering 2023Quote: The micropipette used for the microinjection of vascular tubes was made from borosilicate glass tubes with an outer diameter of 1.2 mm and an inner diameter of 0.94 mm (Harvard Apparatus). The injection micropipette was pulled using a micropipette puller (PC-100 ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch pipettes with resistance 2-9MΩ were pulled using a Sutter P-97 from borosilicate glass (Harvard apparatus, USA) before being filled with either caesium based (in mM ...
-
bioRxiv - Bioengineering 2024Quote: A borosilicate glass micropipette (hereafter referred to as needle) (Harvard Apparatus: 1.0×0.58×100 mm; Harvard Apparatus, Holliston MA) was pulled using a Sutter Instrument P-97 (Sutter Instrument ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch electrodes with a resistance of 3-6 MΩ were pulled from borosilicate filamented glass capillaries (1.5 OD x 0.86 ID x 100 L mm, Harvard Apparatus) with a horizontal puller (P-97 ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch pipettes (3-7 MΩ) were pulled from borosilicate glass capillaries (OD: 1,5 mm, ID: 0,86 mm; Harvard Apparatus) using the vertical PC-100 puller (Narishige International Ltd ...
-
bioRxiv - Neuroscience 2024Quote: A glass micropipette pulled from a glass capillary (1.5 OD x 1.17 ID x 100 L mm, GC150T-10, Harvard Apparatus) was attached to a 10uL Hamilton microsyringe (701N ...
-
bioRxiv - Biophysics 2024Quote: Micropipettes were made from capillaries (1.0 mm OD, 0.58 mm ID, 100 mm length, borosilicate glass G100-4, Harvard Apparatus) drawn out with a filament pipette puller (Sutter Instruments ...
-
bioRxiv - Neuroscience 2020Quote: ... Viruses were infused into the brain by using pulled glass micropipettes coupled with a syringe pump (PHD ULTRA; Harvard Apparatus) at a rate of 100 nl/min ...
-
bioRxiv - Neuroscience 2021Quote: ... Patch pipettes with a resistance range of 5-6 MΩ were made from borosilicate glass capillaries (GC150T-10, Harvard Apparatus) using a vertical puller (PC-10 ...
-
bioRxiv - Microbiology 2020Quote: ... Pipettes were pulled using a DMZ Universal Puller (Zeitz Instruments, Germany) from borosilicate glass capillaries (GC150F-10, Harvard apparatus, UK) to obtain a tip resistance of 10-15 MΩ ...
-
bioRxiv - Neuroscience 2022Quote: ... Injection was given using 10μl Hamilton syringe (Cat no. 72-1823,32G; 700N glass) placed in arm-held Elite-11 mini pump (Harvard Apparatus, USA) at a rate of 100 nl/min and the system was left in place for an additional 1 min and then gently withdrawn ...
-
bioRxiv - Developmental Biology 2020Quote: ... Embryos were pneumatically handled and immobilised for microinjection using a borosilicate glass capillary holder (without filament – Harvard Apparatus; 30-0017). Micro-injectors were connected to needles prepared from filamented borosilicate glass capillaries (Harvard Apparatus ...
-
bioRxiv - Neuroscience 2020Quote: ... Micropipettes were prepared (tip resistance between 3 and 7 MΩ) from borosilicate glass capillaries (outer diameter 1.2 mm, inner diameter 0.69 mm) (Harvard Apparatus Ltd) using a horizontal puller (Sutter) ...
-
bioRxiv - Developmental Biology 2022Quote: ... 2.5 nl of mRNA were injected into the yolk of one cell stage zebrafish embryos at a concentration of 100 or 200 ng/ul.The injections were performed with an air-pressured Pico-lighter injector (PLI100A, Warner Instruments) using 0.5 mm glass capillaries (30-0032, Harvard apparatus) pulled with a PC-10 needle puller (Narishige).
-
bioRxiv - Biophysics 2020Quote: Micropipettes are obtained by elongating borosilicate glass capillaries (1-mm outer diameter, 0.78-mm inner diameter, Harvard Apparatus, Holliston, MA) with a micropipette puller (P-2000 ...
-
bioRxiv - Pharmacology and Toxicology 2021Quote: ... Patch‐clamp recordings were performed in whole‐cell mode under voltage clamp at room temperature using 3-5 MΩ patch pipettes fabricated from borosilicate glass capillaries with an outside diameter of 1 mm and an inside diameter of 0.58 mm (Harvard Apparatus). The voltage protocol comprised voltage ramps applied from −100 to +100 mV every 10 s from a holding potential of 0 mV ...
-
bioRxiv - Neuroscience 2023Quote: Whole-cell patch clamp experiments were performed using heat-polished borosilicate glass pipettes (Harvard apparatus, 1.17 mm x 0.87 mm) with a resistance of 3-6 MΩ ...
-
bioRxiv - Neuroscience 2023Quote: ... The silicone was removed from the recording chamber and juxtacellular recordings were made using glass electrodes (Harvard Apparatus, Holliston, Massachusetts). The resistance of the electrodes varied between 6 and 13 MΩ ...
-
bioRxiv - Neuroscience 2023Quote: ... Presynaptic patch pipette with open tip diameters 4-6 MΩ resistance were pulled from 1.5 mm thin-walled borosilicate glass (Harvard apparatus) and were filled with following internal solution (in mM) ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch pipettes (2.7–4 MΩ for whole-cell patch-clamp and 6.0 and 6.5 MΩ for cell attached mode) were pulled from borosilicate glass capillaries (GC150-10, Harvard apparatus, UK) with a pipette puller (P-97 ...
-
bioRxiv - Neuroscience 2024Quote: ... Recording pipettes with a resistance of 1-3 MΩ were pulled from borosilicate glass capillaries (1.5 mm outer/0.86 mm inner diameter, Harvard Apparatus, UK) on a horizontal electrode puller and filled with recording ACSF ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch pipettes (3-6 MΩ resistance) were fashioned from heat-polished borosilicate glass (Harvard apparatus, 1.17 mm x 0.87 mm) and filled with an intracellular solution containing (in mM) ...
-
bioRxiv - Neuroscience 2024Quote: ... was pressure-injected into the spinal cord near myomere 8 using a pulled capillary glass needle (GC100F-10, Harvard Apparatus) positioned with a micro-manipulator (MN-153 ...
-
bioRxiv - Microbiology 2022Quote: ... The needles where connected to 500 µl glass syringes (Hamilton) that were mounted on separate syringe pumps (PhD Ultra, Harvard Apparatus) using 1 m of tubing (PTFE ...
-
bioRxiv - Neuroscience 2021Quote: ... Whole-cell current-clamp recordings were made from pyramidal cells in area CA1 of the hippocampus using patch pipettes (5– MΩ) manufactured from thick-walled glass (Harvard Apparatus). Pyramidal cells were identified by their position in the slice ...
-
bioRxiv - Neuroscience 2021Quote: ... mRNA in 2 nL RNAase-free water was pressure injected into one blastomere of two-cell stage embryos using a calibrated glass micropipette attached to a PLI-100 picoinjector (Harvard Apparatus). Several days after injection ...
-
bioRxiv - Neuroscience 2020Quote: ... were targeted under oblique infra-red illumination based on somatic morphology and patch clamped using 2-6 MΩ boroscillicate glass electrodes (GC150-10F, Harvard Apparatus) filled with potassium gluconate internal for current-clamp experiments (in mM ...
-
bioRxiv - Neuroscience 2021Quote: ... Respiratory- and locomotor-like activities were recorded respectively on the 4th cervical (C4) and the 2nd lumbar (L2) ventral roots using extracellular suction glass pipettes (120F-10, Harvard Apparatus). Drug-evoked locomotor-like activities were induced by bath-applying 10 to 14 µM of N-methyl- D-aspartate (NMDA ...
-
bioRxiv - Neuroscience 2020Quote: ... in 2 nL RNAse-free water were pressure injected into one of the two cells of the embryo using a calibrated glass micropipette attached to a PLI-100 picoinjector (Harvard Apparatus). After injection the embryos in 2% ficoll in 1X MBSH were placed in an incubator and kept at 18 degree Celsius for 3 h before being transferred to 1% ficoll in 0.1X MBSH and then kept at 18 degrees Celsius overnight ...
-
bioRxiv - Biochemistry 2020Quote: The nanospray emitters used for all native mass spectrometry experiments were made in house by pulling borosilicate glass capillaries (1.0 OD × 0.78 ID × 100 L mm, Harvard Apparatus GC100T-10) with a Sutter Instrument Model P-2000 tip puller using the following instrumental parameters ...
-
bioRxiv - Neuroscience 2021Quote: ... Recording electrodes with impedance of 3-5 MΩ were pulled from borosilicate glass capillaries (Harvard Apparatus, Kent, UK; 1.5 mm OD) using a micropipette electrode puller (DMZ Universal Puller) ...
-
bioRxiv - Neuroscience 2020Quote: ... patch pipettes at 4-6 MΩ were pulled from borosilicate glass capillaries (1.5mm OD, 0.86 mm ID, Harvard Apparatus, #GC150F-10) and filled with intracellular solution containing (in mM ...
-
bioRxiv - Neuroscience 2022Quote: ... Patch recording electrodes (4-8 MΩ resistance) were pulled using a PC-10 puller (Narishige) from borosilicate glass capillaries (GC150F-10, Harvard Apparatus) and filled with a filtered voltage clamp intracellular solution containing (in mM) ...
-
bioRxiv - Biophysics 2022Quote: Glass pipettes were fabricated with a Sutter P-97 horizontal puller from thick-walled filamented borosilicate glass (GC150F-7.5; Harvard Apparatus,UK) and fire-polished just before use with a microforge to a resistance of 8-12 MΩ ...