Labshake search
Citations for Bio-Rad :
451 - 500 of 1949 citations for Dechlorane Plus Syn Bis Cyclopentene 13C10 99% 100 Ug Ml In Toluene since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2024Quote: ... Protein standards used were All blue Precision Plus (Bio-Rad). For LC-MS/MS analysis protein gels were stained over night at room temperature with Coomassie solution (B8522-1EA ...
-
bioRxiv - Cancer Biology 2024Quote: ... and with Dual Color Precision Plus Protein Standards (Bio-Rad). Proteins were then transferred to a 0.2µm Nitrocellulose Membrane (Bio-Rad ...
-
bioRxiv - Genetics 2024Quote: ... The Precision Plus Protein All Blue Standard (BioRad, Hercules, USA) or the Color Prestained Protein Standard ...
-
bioRxiv - Developmental Biology 2024Quote: ... along with Precision Plus Dual Color Protein Standard (Biorad 1610394) and transferred to a nitrocellulose membrane (Biorad 170-4270 ...
-
bioRxiv - Biochemistry 2020Quote: ... pH 7.5 to a salt concentration of 100 mM NaCl and loaded onto a 5 mL Bio-Scale TM Mini CHT Type II column (Bio-Rad) equilibrated with CHT column buffer (5% glycerol (w/v) ...
-
bioRxiv - Molecular Biology 2022Quote: ... at a 1:5 w/w ratio for 2 hours before addition of 100 mg mL-1 Bio-Beads SM-2 resin (Bio-Rad) and then incubated overnight at 4 °C with gentle agitation to remove detergent ...
-
bioRxiv - Molecular Biology 2023Quote: ... gels were stained with ethidium bromide (5 µL of 10 mg/mL ethidium bromide (EtBr) solution in 100 mL TAE) and imaged in a Gel Doc XR + System using the Image Lab software (Bio-Rad). Each experiment was carried out in triplicate.
-
bioRxiv - Microbiology 2019Quote: ... Fractions of 1 ml were recovered from the top to the bottom of each tubes and loaded on a gradient 4-12 % SDS-PAGE Bis-Tris gel (BioRad). For Western Blot analysis ...
-
bioRxiv - Cell Biology 2022Quote: ... Samples were eluted in SDS sample buffer and 30 μl of each sample was run on a 12% Bis-Tris 1D SDS-PAGE gel (Biorad) for 1 cm and stained with colloidal Coomassie dye G-250 (Gel Code Blue Stain Reagent ...
-
bioRxiv - Molecular Biology 2020Quote: ... The immunoprecipitates were resolved on 4-12% Criterion XT Bis-Tris or 4-20% Mini-Protean TGX precast gels (BioRAD) and transferred to Immobilon-FL PVDF membranes (Millipore) ...
-
bioRxiv - Cell Biology 2022Quote: ... 30 µg of total protein per sample was loaded on NuPage 4-12% Bis-Tris Protein gels (Thermo Fischer Scientific) or 4–15% Mini-PROTEAN TGX StainFree Protein gels (Biorad) and run at 200 V as per manufacturer’s instructions ...
-
bioRxiv - Cell Biology 2022Quote: ... supernatants aspirated and loaded on to 4-12% NuPage Bis/Tris gels for separation before transfer on to a Nitrocellulose membrane (Biorad) at 4°C at a constant current of 350mA in transfer buffer (25 mM Tris ...
-
bioRxiv - Immunology 2019Quote: ... All protein samples were separated on 10% bis-Tris gels by SDS-PAGE and then transferred to PVDF membranes membranes using Trans-Blot Turbo Transfer System (Biorad). The membranes were blocked in 2% ECL Prime Blocking Reagent (GE Amersham RPN418 ...
-
bioRxiv - Neuroscience 2021Quote: Samples were resolved by SDS-PAGE using either 10 or 12% acrylamide/bis-acrylamide gels and transferred to 0.22 µm nitrocellulose (Bio-Rad). Membranes were blocked with Odyssey blocking buffer (LI-COR Biosciences) ...
-
bioRxiv - Biophysics 2020Quote: ... samples were washed for two minutes with degassed polyacrylamide (PA) solution consisting of 4% (vol/vol) 19:1 acrylamide/bis-acrylamide (161010144, BioRad), 60 mM Tris-HCl pH 8 (AM9856 ...
-
bioRxiv - Microbiology 2020Quote: ... 15 μL of each reaction was immediately loaded onto an 8% TBE gel (Acrylamide/Bis solution 37.5:1, Bio-rad) supplemented with 2 mM MgCl2 ...
-
bioRxiv - Molecular Biology 2020Quote: ... Running buffer was prepared with tris-glycine 1X and SDS 0.1% using a homemade gel (7-12% bis-acrylamide, Bio-Rad), which ran at 100 V for approximately 2:30 h ...
-
bioRxiv - Microbiology 2020Quote: ... Samples were run in 3-12% Bis-Tris gradient gels and transferred to PVDF membranes in a wet blot system (BioRad). Membranes were dried ...
-
bioRxiv - Immunology 2022Quote: ... Total of 15-30µg protein were separated on a 4-12% Bis-Tris SDS PAGE and transferred using BioRad Turbo Blot (1704156, BioRad) onto PVDF membrane ...
-
bioRxiv - Bioengineering 2022Quote: ... Tricine-SDS-PAGE experiments were performed using a single layer 0.75 mm thick 20% acrylamide/bis-acrylamide gel (using 29:1 Acrylamide/Bisacrylamide, Bio-Rad) run at 120 V constant voltage (Pharmacia LKB ...
-
bioRxiv - Molecular Biology 2020Quote: ... and adjusted before isolation of protein aggregates as well as verified by running reduced samples on Criterion XT Precast Gel 4-12% Bis-Tris (BioRad) and staining with Coomassie Brilliant Blue R-250 staining solution (BioRad) ...
-
bioRxiv - Cell Biology 2020Quote: ... Proteins were transferred from Bis-Tris gels to polyvinylidene fluoride (PVDF) membranes for 2 hours using a wet transfer system (BioRad). Following transfer ...
-
bioRxiv - Cancer Biology 2022Quote: ... 10 or 12.5% bis-tris gels and protein was transferred to PVDF membranes using a wet transfer system (Bio-Rad). Membranes were blocked with 5% milk in TBS-T and incubated overnight with primary antibody in either milk or BSA at manufacturer recommended concentrations ...
-
bioRxiv - Molecular Biology 2019Quote: ... SDS-PAGE gels used for this work were 10 % final concentration made with 30 % acrylamide/bis solution at a ratio of 37.5:1 (BioRad 1610158). Please note that SDS-PAGE analysis does not resolve polyP-induced shifts ...
-
bioRxiv - Cell Biology 2019Quote: ... bound proteins were eluted directly in sample buffer and samples were separated on a 4-12% Criterion Bis-Tris gel (BioRad). Proteins were transferred to PVDF membrane (Immobilon-FL ...
-
bioRxiv - Microbiology 2020Quote: One hundred μg of the different PAO1 cytoplasmic extracts were loaded onto conventional SDS-PAGE 10% Bis-Tris gels (mini-protean TGX Stain-free precast Gels, BioRad). The gel was stained with Coomassie blue and each lane was cut into 10 bands ...
-
bioRxiv - Biochemistry 2020Quote: ... The samples were heated at 95°C for 5 min and separated on a 12% Bis-Tris SDS-PAGE gel (Biorad).
-
The Arabidopsis F-box protein FBW2 degrades AGO1 to avoid spurious loading of illegitimate small RNAbioRxiv - Cell Biology 2021Quote: ... either on 7-12% Tris-glycine gels or gradient NuPAGE 4-12% Bis-Tris Protein Gels (Thermo Fischer) or gradient Criterion TGX gel (4-15%) (BioRad). List of antibodies and their working dilution used in this work are reported in (Table S4) ...
-
bioRxiv - Developmental Biology 2019Quote: ... NuPage 4-12% Bis-Tris protein gels beofre transferring into PVDF membranes using the Trans-Blot Turbo transfer system (Biorad). Prior to blocking and antibody incubation ...
-
bioRxiv - Cell Biology 2019Quote: ... An 11 kPa polyacrylamide (PA) solution (715 µL 50 mM HEPES pH 7.4, 150 µL 2% bis-acrylamide (Bio-Rad), 125 µL 40% acrylamide ...
-
bioRxiv - Evolutionary Biology 2021Quote: ... Proteins were separated by 4-15% SDS-PAGE gel (Bis-Tris Criterion™ TGX™ pre-cast gels, Bio-Rad) and transferred to PVDF membranes (Thermo Scientific) ...
-
bioRxiv - Neuroscience 2022Quote: ... equal amounts of protein (2.5 or 10 µg) were separated by SDS-PAGE on 4-12% Bis-Tris or 3-8% Tris acetate gels (Criterion XT, BioRad) and transferred to nitrocellulose using TransBlot Turbo (BioRad) ...
-
bioRxiv - Neuroscience 2022Quote: ... Samples were resolved by SDSPAGE using 10% acrylamide/bis-acrylamide gels and transferred to 0.2 μm pore size nitrocellulose (Bio-Rad). Membranes were blocked with Odyssey blocking buffer (LI-COR ...
-
bioRxiv - Molecular Biology 2023Quote: ... 10-30 μg of proteins were loaded in Bolt 4-12 % Bis-Tris gels (Thermo) followed by transferring onto a 0.2 mm PVDF membrane (Bio-Rad) at 25 V ...
-
bioRxiv - Biochemistry 2023Quote: ... Samples were deposited onto 26-well 12% Bis-Tris Criteroin XT precasted gels (Bio-Rad Laboratories Inc., Hercules, CA, USA) and electrotransferred onto a nitrocellulose membrane with a semidry electrotransfer system (Schleicher & Schuell BioScience ...
-
bioRxiv - Cell Biology 2023Quote: ... 20 μg of protein per sample was resolved on a NuPage 4-12% Bis-Tris polyacrylamide mini gel (Bio-Rad) and transferred to a nitrocellulose membrane in Towbin transfer buffer containing 20% MeOH at 100V for 1 hour or 25V for 16 hours ...
-
bioRxiv - Neuroscience 2024Quote: Samples were resolved by SDSPAGE using either 10 or 12% acrylamide/bis-acrylamide gels and transferred to 0.22 µm nitrocellulose (Bio-Rad). Membranes were blocked with Odyssey blocking buffer (LI-COR Biosciences ...
-
bioRxiv - Cell Biology 2023Quote: ... For each sample 20 μg of K562 cell extracts were loaded on 6-18% hand-casted acrylamide SDS-PAGE gradient gel (40% Acrylamide/bis-Acrylamide solution, BioRad). After separation by electrophoretic run ...
-
bioRxiv - Plant Biology 2023Quote: ... either on 7–12% Tris-glycine gels or gradient NuPAGE 4–12% Bis-Tris Protein Gels (Thermo Fischer) or gradient Criterion TGX gel (4–15%) (BioRad). A list of antibodies and their working dilution used in this work are reported in (Table S3) ...
-
bioRxiv - Microbiology 2023Quote: ... were separated on a 4 to 12% gradient XT precast Criterion gel using XT-MOPS buffer (1.0 mm thick 4 to 12% polyacrylamide Criterion Bis-Tris XT-gels, Bio-Rad) at 150–200V ...
-
bioRxiv - Molecular Biology 2024Quote: ... 95 °C) and 1.25 µg sample was resolved on a 4-12% acrylamide Criterion XT Bis-Tris gel (Bio-Rad) in MOPS buffer at 100 V for 20 min and subsequently at 150V for 190 min on ice along with PageRuler™ Plus Prestained Protein Ladder (Thermo Scientific ...
-
bioRxiv - Neuroscience 2024Quote: ... Samples were denatured for 10 minutes at 70°C and proteins were separated (55min, 200V) on a Midi 4-12% Bis-Tris gel (BioRad) in 1x MOPS buffer (BioRad ...
-
bioRxiv - Neuroscience 2024Quote: ... Slices were then incubated eMAP hydrogel monomer solution (30% acrylamide [A9099, MilliporeSigma, St. Louis, MO, USA], 10% sodium acrylate [408220, MilliporeSigma], 0.1% bis-acrylamide [161-0142, Bio-Rad Laboratories ...
-
bioRxiv - Microbiology 2020Quote: ... Colonization of SEΔΔΔ was quantified by dilution plating and counting colony forming units (CFU) on SASelect plates supplemented with 100 μg/mL D-alanine (BioRad, Hercules, CA). All experiments were done in triplicate.
-
bioRxiv - Cell Biology 2019Quote: ... Precision Plus Protein Dual Color Standard ladder was used (BioRad, USA). Dilutions and primary antibodies used ...
-
Tracing production instability in a clonally-derived CHO cell line using single cell transcriptomicsbioRxiv - Cell Biology 2021Quote: ... The Precision Plus Protein™ Dual Color Standards (Biorad, cat.no.1610374) was used for molecular weight estimation ...
-
bioRxiv - Bioengineering 2021Quote: ... using the Precision Plus Protein™ Dual Color Standard (Bio-Rad). After protein separation was completed ...
-
bioRxiv - Cell Biology 2020Quote: ... were cast in a PROTEAN Plus multi casting chamer (Bio-Rad). Samples were loaded (~20 μL ...
-
bioRxiv - Cell Biology 2021Quote: ... The Precision Plus Protein Dual Color Protein Standard (BioRad Cat# 1610374) was used as a protein molecular weight ladder ...
-
Effects of Sanhuang plaster on expression of MyD88, TRAF6, MIP-1β and IL-23 in rats infected by MRSAbioRxiv - Molecular Biology 2022Quote: ... Benchmark Plus enzyme-linked immunosorbent assay(American Bio-Rad Co., Ltd.).