Labshake search
Citations for Bio-Rad :
401 - 450 of 5925 citations for 7 Bromo 2 methylimidazo 4 5 c pyridine since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biochemistry 2020Quote: ... The samples were heated at 95°C for 5 min and separated on a 12% Bis-Tris SDS-PAGE gel (Biorad).
-
bioRxiv - Genetics 2019Quote: ... Protein samples were denatured at 95°C for 5 min in appropriate loading buffer and loaded into precast SDS-PAGE gels (10% polyacrylamide; Biorad). Gels were run at 40 mA for 45 min in 1x running buffer (Fisher) ...
-
bioRxiv - Neuroscience 2021Quote: ... Samples (10 µg protein) were denatured at 95°C for 5 min in 4x Laemmli Sample Buffer (1610747, Bio-Rad) or Novex NuPAGE LDS Sample Buffer (NP0007 ...
-
bioRxiv - Genetics 2022Quote: ... Approximately 43µl of the newly formed droplet solution were transferred into a ddPCR 96-well plate and then sealed at 180°C for 5 seconds in the PX1 PCR Plate Sealer (BioRad). PCR was carried out with the following conditions ...
-
bioRxiv - Synthetic Biology 2022Quote: ... PFGE was undertaken by running samples on a 1.0% agarose gel in 0.5 X TBE solution at 14 °C on a Bio-Rad clamped homogeneous electric field apparatus (CHEF-DR III, BioRad). 6 V/cm were used with 15 h switch time of 60 s followed by 15 h 120 s at 120° ...
-
bioRxiv - Molecular Biology 2023Quote: ... 25 μl of the sample were heated at 95°C for 5 min and resuspended in 4x Laemmli sample buffer (BioRad)/50 mM DTT before SDS-PAGE.
-
bioRxiv - Molecular Biology 2023Quote: ... Lysates were boiled at 95 °C for 5 min before being loaded onto a polyacrylamide gel (Cat# 4561094, Bio-Rad). Proteins were blotted onto a PVDF membrane (Bio-Rad ...
-
bioRxiv - Neuroscience 2023Quote: ... The samples adjusted to contain equal amounts of protein (10 μg or 12 μg) were next denatured (5 min at 95°C) in loading buffer (#1610747, BioRad) and run on 10% TGX (#4561034 ...
-
bioRxiv - Microbiology 2023Quote: ... All samples collected were heated to 95°C for 5 minutes before resolving on a 12% mini-PROTEAN precast gel (BioRad). A Western blot using polyclonal EssR antiserum was conducted following the protocol outlined in the Western blot method section below ...
-
bioRxiv - Neuroscience 2023Quote: ... The samples were eluted by heating at 100°C for 5 min in Laemmli sample loading buffer (Bio-Rad, USA), and resolved on an SDS/PAGE ...
-
bioRxiv - Microbiology 2020Quote: ... Supernatants were mixed with SDS sample buffer containing DTT and incubated for 5 min at 95°C prior to fractionation by SDS-PAGE analysis on 4%–15% Mini-PROTEAN TGX Stain-Free Protein Gels (Bio-Rad). Transfer to nitrocellulose membranes and probing for Western blot analysis was as described previously ...
-
bioRxiv - Molecular Biology 2020Quote: ... which is pre-equilibrated by Buffer A before use with rotation at 3 hr in 4°C in Econo-Pac Chromatography Columns (20 mL, Bio-Rad). After the unbounded fraction was discarded ...
-
Osh6 requires Ist2 for localization to the ER-PM contacts and efficient phosphatidylserine transportbioRxiv - Cell Biology 2020Quote: ... Protein samples were heated at 55°C for 10 min and 10 μl was loaded on SDS–PAGE (4-20% Mini-PROTEAN TGX Stain-Free, Bio-Rad) and analyzed by Western blot.
-
bioRxiv - Neuroscience 2021Quote: ... was then added and the solution was mixed at 4°C for 10 minutes before addition of 100 mg of Biobeads SM2 (Bio-Rad). Biobeads were washed into methanol ...
-
bioRxiv - Physiology 2019Quote: ... paraffin-embedded sections were incubated at 4°C overnight with antibodies for F4/80 (MCA497G, Bio-Rad Laboratories, Hercules, CA, USA), HILPDA (sc-137518 HIG2 Antibody (C-14) ...
-
bioRxiv - Pathology 2019Quote: ... 20% methanol and MilliQ water) overnight at 4°C in a wet transfer apparatus at 70 mA constant voltage (Bio-Rad). Detection of the chemiluminescence immunochemical reaction was performed on a ChemiDoc ™ XRS + Molecular Imager® (Bio-Rad ...
-
bioRxiv - Cell Biology 2021Quote: ... Membranes were incubated with primary antibodies (Supplementary Table 1) overnight at 4°C and visualised with HRP-conjugated anti-IgG secondary antibodies and enhanced chemiluminescence substrates (Bio-Rad). The expression of PDHX or calnexin was used as a loading control.
-
bioRxiv - Biochemistry 2021Quote: ... 5 μg of lysate was heat denatured for 3 minutes at 95°C for 3 minutes and resolved on a pre-cast 4-15 % SDS-PAGE gels (Bio-Rad) at 200V for 45 minutes in 1X running buffer (25mM Tris pH 8.3 ...
-
bioRxiv - Biochemistry 2020Quote: ... The sample was incubated for 90 minutes at 4°C before the resin was collected in a 20 mL disposable column (Bio-Rad) and washed with 100 mL Buffer B + 150 mM NaCl ...
-
bioRxiv - Biochemistry 2020Quote: ... The sample was incubated for 90 minutes at 4°C before the resin was collected in a 20 mL disposable column (Bio-Rad) and washed with 100 mL Buffer D ...
-
bioRxiv - Biochemistry 2020Quote: ... The sample was incubated for 90 minutes at 4°C before the resin was collected in a 20 mL disposable column (Bio-Rad) and washed with 100 mL Buffer C + 400 mM NaCl ...
-
bioRxiv - Pathology 2021Quote: ... maximum power with 30 second intervals and the lysate obtained by ultracentrifugation at 100,000 g for 60 minutes, 4°C (CS 100FNX, HITACHI) resuspended in PBS and the concentration was measured by Bio-Rad protein assay dye reagent concentrate (BioRad) ...
-
bioRxiv - Plant Biology 2021Quote: ... and incubated on a rotary shaker for 60 min at 4°C before transfer to a Poly-Prep Chromatography Column (Bio-Rad). The column bed was washed with 40 ml of a wash buffer containing 50 mM Tris-HCl (pH 7.5) ...
-
bioRxiv - Microbiology 2020Quote: ... Clarified lysates were incubated with 2 ml of glutathione resin and rotated for 1 h at 4°C in a 25 ml disposable drip column (Bio-Rad). Settled resin was washed with 25 column volumes (CV ...
-
bioRxiv - Cell Biology 2021Quote: ... The supernatant was collected after centrifugation at 15,000 ×g for 15 min at 4°C and applied to a 20 mL open column (Poly-Prep Chromatography Columns; BIO-RAD) containing 500 µL of Ni-NTA agarose (Qiagen ...
-
bioRxiv - Biophysics 2021Quote: ... fPanx1ΔC purity was assessed by SDS–polyacrylamide gel electrophoresis (PAGE) using 4-20% pre-cast gradient Tris-glycine gel (Bio-Rad) stained with Simply Blue (SimpleBlue Safe Stain ...
-
bioRxiv - Cell Biology 2022Quote: ... lysates were then clarified through centrifugation (14’000 g, 20 minutes, 4°C) and then quantified using Bradford Reagent (Bio-Rad Laboratories) according to manufacturer’s instructions.
-
bioRxiv - Plant Biology 2022Quote: ... The extract was centrifuged at 18,000 g for 10 minutes at 4 °C and the protein content of the supernatant determined using the Bradford method (Bio-Rad) in a spectrophotometer measuring the absorbance at 595 nm and then eluted in Laemmli 2X buffer with 8 % β-mercaptoethanol (95 °C for 5 minutes) ...
-
bioRxiv - Developmental Biology 2022Quote: ... Blots were incubated overnight at 4°C with primary antibodies and then probed with secondary antibodies before ECL development and imaging (Bio-Rad). Primary antibodies used for immunoblotting are as follows ...
-
bioRxiv - Immunology 2020Quote: ... Samples were heated at 95°C for 3 minutes and run on a 8 – 16% or 4 – 20% TGX-Criterion gel (Bio-Rad). The separated proteins were transferred to PVDF membranes and blocked in PBS containing 0.2% fish skin gelatin (Sigma-Aldrich ...
-
bioRxiv - Molecular Biology 2020Quote: ... Protein extracts were centrifuged at 20000 g for 20 min at 4 °C and then filtered by gravity using Poly-Prep chromatography columns (731-1550, Bio-Rad). Supernatants were filtered by gravity through Poly-Prep chromatography columns (731-1550 ...
-
bioRxiv - Neuroscience 2020Quote: ... After rinses with PBS-0.1% Tween 20 (PBST), sections were incubated overnight at 4°C with rabbit anti-Iba1 (Wako, 019-19741) and anti-BrdU (Biorad, MCA2060). After washes with PBST ...
-
bioRxiv - Microbiology 2022Quote: ... cells were fixed in 10% neutral buffered formalin at 4°C overnight and then mCherry-positive plaques were visualized using a ChemiDoc MP imaging system (Bio-Rad). Afterwards ...
-
bioRxiv - Cell Biology 2019Quote: ... After centrifugation at 14000 rpm for 8min at 4° C the supernatant was collected and protein concentration determined by the Bradford protein assay (Bio-Rad). The proteins were run on 7%-15% SDS-PAGE gels (50μg per lane ...
-
bioRxiv - Developmental Biology 2019Quote: ... A total of 20 μg of sample was loaded per well onto 12% SDS-PAGE gels and subsequently transferred overnight at 4°C to Immun-Blot LF PVDF membranes (Bio-Rad). Membranes were incubated overnight with one of the following rabbit primary antibodies (all from Cell Signaling Technology and all cross-react with rat) ...
-
bioRxiv - Biochemistry 2020Quote: ... in 1X TBE buffer at 220V for ∼13 min at 4°C and were imaged with a Gel Doc XR+ (Bio-RAD) and Quantity One 4.6.9 software (Bio-Rad).
-
bioRxiv - Genomics 2019Quote: All protein isolation steps were performed at 4 °C or on ice and protein concentrations were assessed with the Bradford assay (Bio-Rad). Protein from total pancreas lysates was isolated from a small fragment of mouse pancreas and minced in lysis buffer (20 mM Tris-HCl ...
-
bioRxiv - Molecular Biology 2020Quote: ... at 1.0 V/cm for ∼48 hr at 4°C with buffer circulation in a Sub-cell GT electrophoresis system (Bio-Rad). The buffer was changed every ∼24 hr.
-
bioRxiv - Biochemistry 2020Quote: ... After 24 h incubation at 4 °C the chelating agent was removed using a desalting column (Econo-Pac 10DG from Bio-Rad), pre-equilibrated with 20 mM Hepes buffer ...
-
bioRxiv - Biochemistry 2021Quote: ... The supernatant was incubated for 1 h at 4°C with 0.5 mL Profinity IMAC resin (Bio-Rad Laboratories, Hercules, CA) in a buffer containing 20 mM MOPS-Na (pH 7.4) ...
-
bioRxiv - Biochemistry 2021Quote: ... and increasing concentrations of NONO(53-312) were prepared and incubated at 4°C for 1 hour before loaded onto a Dot Blot apparatus (Bio-rad) containing a nitrocellulose membrane (top ...
-
bioRxiv - Genomics 2020Quote: ... heated at 95°C for 10 min and run on a Mini-protean TGX 4%-20% polyacrylamide gel (Biorad, 456-1095). The proteins were transferred onto PVDF membranes using the Mini Trans-Blot Electrophoretic Transfer Cell (Bio-Rad ...
-
bioRxiv - Immunology 2021Quote: Lysates were centrifuged for 15 minutes at 4°C to recover supernatant and quantified for protein concentration using Protein Assay Dye Reagent Concentrate (Bio-Rad). 40ug of protein was loaded per well for polyacrylamide gel electrophoresis using Mini-PROTEAN Precast Polyacrylamide Gels (Bio-Rad) ...
-
bioRxiv - Microbiology 2021Quote: ... boiled for 5 min at 95 °C and separated by discontinuous sodium dodecyl sulfate (SDS) 4-15% polyacrylamide gel electrophoresis (SDS-PAGE precast gels, Bio-Rad). The SDS-PAGE gels were stained in Coomassie Blue solution (Bio-Rad).
-
bioRxiv - Cell Biology 2022Quote: ... After centrifugation at 14000 rpm for 20 min at 4°C the supernatant was collected and protein concentration determined by the Bradford protein assay (Bio-Rad). Fifty micrograms of total extract were then loaded in SDS-polyacrylamide gels and transferred onto nitrocellulose membranes for western blot analysis ...
-
bioRxiv - Physiology 2022Quote: ... Lysates were diluted with 4X Laemmli buffer containing beta-mercaptoethanol and boiled for 10 minutes at 95°C and subjected to SDS-polyacrylamide gel electrophoresis 4-20% (Criterion TGX Stain-Free Protein Gel, Bio-Rad) gels ...
-
bioRxiv - Neuroscience 2022Quote: ... Samples were heated at 95°C for 10 min and loaded into a 4-15% gradient Tris-glycine gel (Biorad 4561084) immersed in Tris-glycine-SDS running buffer (Biorad 1610772) ...
-
bioRxiv - Cell Biology 2023Quote: ... The lysates were centrifuged at 18,000 x g for 30 minutes at 4 °C and the supernatant was incubated with SurebeadsTM Protein A Magnetic Bead (Bio-rad) conjugated with rabbit monoclonal DYKDDDDK antibody at RT for two hours ...
-
bioRxiv - Cell Biology 2023Quote: ... the lysates were mixed with an equal volume of 2X Laemmli sample buffer and incubated for 5 min at 95°C prior to separation by SDS PAGE on Criterion TGX stain-free 4-15% gradient gels (Bio-Rad). Following SDS-PAGE ...
-
Pushed to the edge: hundreds of Myosin 10s pack into filopodia and could cause traffic jams on actinbioRxiv - Cell Biology 2023Quote: ... All samples were boiled at 70°C for 10 min before loading onto a 4-20% Mini-PROTEAN TGX Stain-Free protein gel (BioRad, 4568095). The gel was run at 180 V for 45 min and imaged on a ChemiDoc ...