Labshake search
Citations for Bio-Rad :
401 - 450 of 7732 citations for 4 1 1 2 3 3 3 Hexafluoropropoxy acetophenone since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2020Quote: ... Samples were checked for purity and presence of protein using 15% SDS-PAGE (Polyacrylamide gel electrophoresis, Mini Protean 3 System, Bio-Rad) and Coomassie Brilliant Blue (Merck ...
-
bioRxiv - Microbiology 2020Quote: ... the capped full-length RNA and IBV-N transcripts dissolved in 400 μl PBS were co-transfected into Vero cells by electroporation (450 v, 50 μF, 3 mSec, GenePulser Xcell, BIO-RAD). After 48 h ...
-
bioRxiv - Synthetic Biology 2021Quote: ... microwells containing assembled protocell arrays were all incubated at 37 °C for 3 hours before imaging on a ChemiDoc MP (Bio-Rad) imaging system ...
-
bioRxiv - Immunology 2021Quote: ... pooled and subjected to two consecutive preparative isoelectric focusing (IEF) at pH 3-10 (first separation) and pH 5-7 (second separation) using a Rotofor Cell (Bio-Rad). The individual IEF fractions were harvested ...
-
bioRxiv - Immunology 2020Quote: ... the cells were divided into 100 μl aliquots and heated individually at different temperatures for 3 minutes (Thermal cycler, BIO-RAD) followed by cooling for 2 minutes at room temperature ...
-
bioRxiv - Biochemistry 2021Quote: ... run with radioactive sample for 15 min at 200 V, dried (80°C, 3 hours) on a gel dryer (Bio-Rad), and exposed to a phosphor screen ...
-
bioRxiv - Molecular Biology 2020Quote: ... Plates were incubated in the dark for 3 days at 30°C and then photographed in a Gel Doc XR+ (Bio-Rad).
-
bioRxiv - Immunology 2021Quote: ... Beads were washed 3 times with ice cold nondenaturing lysis buffer and boiled in 4x Laemmli Sample Buffer (Bio-Rad, #1610747) for 10 mins ...
-
bioRxiv - Immunology 2020Quote: ... 6µg of Round or Rod-shaped CCMVTT-VLPs were mixed with 2x mercaptoethanol and heated at 95°C for 3 minutes and then loaded into Any kD Mini-PROTEAN TGX precast protein gels (BIO-RAD). Gel was run for 35min at 180V ...
-
bioRxiv - Cell Biology 2021Quote: ... were incubated in TBS-T/milk for 45 min and washed 3 × 5 min with TBS-T before detecting using a Chemidoc imager (Bio-Rad). NearIR-conjugated secondary antibodies (LI-COR Biosciences ...
-
bioRxiv - Biochemistry 2022Quote: ... Dialysis was repeated against another 1 L of low-salt buffer for 3 h before application to a MonoQ (MonoQ HR 10/10, Pharmacia) FPLC column (Biologic Duoflow system, Bio-Rad). The sample was eluted over 80 mL in 20 mM piperazine by applying a gradient from 0% to 30% of a high-salt buffer (20 mM piperazine ...
-
bioRxiv - Cancer Biology 2023Quote: ... Membranes were washed a further 3 times in TBS-T and bound antibodies were visualised using the Clarity Western ECL substrate (BioRad; #1705061) with a ChemiDoc MP system (BioRad) ...
-
bioRxiv - Biochemistry 2023Quote: ... The slurry was gently stirred for 3 h to allow binding and then loaded into a glass Econo-Column (Bio-Rad). The column was washed with 10 Column Volumes (CV ...
-
bioRxiv - Molecular Biology 2022Quote: ... membranes were washed in 1X PBS with 0.1% Tween 3 times for 5 minutes each before scanning using the ChemiDoc™ MP Imaging System (Bio-Rad). Note ...
-
bioRxiv - Molecular Biology 2022Quote: ... The 10 µL cDNA reaction was diluted to 200 µL and 3 µL was used with iTaq Universal SYBR Green Supermix (Bio-Rad) and 670 nM of primer pairs (Table S4 ...
-
bioRxiv - Molecular Biology 2022Quote: ... The resulting products were analyzed on a 3% agarose gel stained with ethidium bromide and visualized using ChemiDoc XRS+ (Bio-Rad). The relative amounts of the resulting products were analyzed by scanning the gels and determining the intensities of ethidium bromide stained bands using Image Lab software Version 1.36b (Bio-Rad) ...
-
bioRxiv - Developmental Biology 2022Quote: ... RNA from individual cells were barcoded and libraries prepped according to the 10X chromium version 3 chemistry using the C1000 Touch thermal cycler (Bio-Rad). Quality of prepped cDNA and resultant libraries were assessed with the Agilent 2100 Bioanalyzer ...
-
bioRxiv - Cell Biology 2022Quote: ... Cells were grown at 30°C for 3-6 days and images captured using a Chemidoc XRS+ imager (BioRad, Hercules, CA). All images were evenly adjusted in Photoshop (Adobe Systems Incorporated ...
-
bioRxiv - Molecular Biology 2024Quote: ... the membranes were washed 3 times for 10 minutes each and then developed with the Clarity or Clarity Max ECL Western Blotting Substrates (Bio-Rad). The chemiluminescence detection was performed using the Chemidoc MP system (Bio-Rad ...
-
bioRxiv - Cell Biology 2023Quote: ... Membranes were then exposed to the ECL substrate kit (Pierce 34850 and 34095) for 3 minutes before imaging with the ChemiDoc Touch Imaging System (Bio-Rad).
-
bioRxiv - Biophysics 2023Quote: ... Gels were run on ice at 140V for 3 hours using Bio-Rad Mini-Protean TGX precast gels in 1X Tris/Gly/SDS running buffer (BioRad #1610732). Gels were then equilibrated with transfer buffer (BioRad #1610734 ...
-
bioRxiv - Synthetic Biology 2023Quote: ... The membrane was washed 3 times with TBST for 5 min each and then the membrane was incubated with Clarity Western ECL Substrate (Bio-Rad) for 2 min before exposure to film and development in a darkroom.
-
bioRxiv - Biochemistry 2022Quote: ... Enzyme purity and molecular weight were estimated by 12 % SDS-PAGE using mini-PROTEAN 3 system (BioRad, Hercules, California, United States). Gels were stained using PageBlue Protein Staining Solution (Thermo Fisher Scientific ...
-
bioRxiv - Cell Biology 2022Quote: ... and 110 V for additional 2.5-3 h) and transferred to a nitrocellulose membrane overnight (~16 h) at 15 V using the Bio-Rad Transblot (Bio-Rad). Membranes were blocked in 5% fat-free milk in Tris buffered saline with Tween-20 (TBST ...
-
bioRxiv - Immunology 2022Quote: ... were amplified by PCR using 5’ and 3’ primers with overhangs containing T7 binding sites using iProof High-Fidelity Taq (Bio-Rad). PCR reaction products were run on an agarose gel to check for the correct amplicon ...
-
bioRxiv - Zoology 2022Quote: ... sfRNA and 3’UTR were quantified together by RT-qPCR using the iTaq Universal Sybr green one-step kit (Bio-Rad) with primers previously designed [26] ...
-
bioRxiv - Molecular Biology 2023Quote: ... LAMP reaction products were analysed on 2% agarose gels (65V for 3 hr) stained with ethidium bromide (10 mg/mL) and viewed on Gel Doc XR Imaging System (BioRad, USA).
-
bioRxiv - Molecular Biology 2023Quote: ... Membranes were washed 3 times for 5 min with TBS and were subsequently incubated with Clarity Western ECL substrate working solution (Bio-Rad) for 5 min ...
-
bioRxiv - Microbiology 2023Quote: ... and resolved for 4 hours at 120V for LapA and 3 hours at 115V for MapA in Mini-PROTEAN Tetra Vertical Electrophoresis Cells (Bio-Rad) with 1x Tris/Glycine/SDS buffer (Bio-Rad) ...
-
bioRxiv - Cell Biology 2024Quote: ... The resulting cDNA was diluted 1:20 in RNase-free H2O and 3 µl dilution were used for RT-qPCR analysis using iTaq Universal SYBR Green Supermix (Bio-Rad) according to manufacturer’s instructions and using the following cycling protocol ...
-
bioRxiv - Neuroscience 2024Quote: ... The blot was washed 3 times with TBST for 5 minutes and was developed with Clarity Max Western ECL Substrate (Bio-Rad) for 1 minute before imaging ...
-
bioRxiv - Neuroscience 2024Quote: ... The blot was washed 3 times with TBST for 5 minutes and was developed with Clarity Max Western ECL Substrate (Bio-Rad) for 1 minute before imaging ...
-
bioRxiv - Molecular Biology 2024Quote: ... Membranes were washed 3 times for 10 min with TBS-T and developed with an enhanced chemiluminescence (ECL Bio-Rad 1705061) substrate ...
-
bioRxiv - Microbiology 2024Quote: ... Electroporation was carried out with 3-5 μL of the linear PCR product (metH homology extension-flanked kan cassette) at 2.5 kV (Bio-Rad MicroPulser), and cells were immediately recovered with 1 mL SOC and cultured at 37°C for one hour ...
-
bioRxiv - Cell Biology 2024Quote: ... DNA samples (3 μL) and master mixes (7 μL) were pipetted into a 96-well PCR plate (Cat# MLL9651, Bio-Rad), and PCR amplification was performed using the CFX96 Touch Real-Time PCR Detection System (Bio-Rad) ...
-
bioRxiv - Biochemistry 2024Quote: ... The protein was then eluted in 3 mL buffer A containing 300 mM imidazole before applying the eluate onto Econo-Pac 10DG column (Bio-Rad) equilibrated with HBS to remove imidazole ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... The membranes were then washed with TBST again 3 times for 15 min before adding Goat Anti-Mouse IgG (H + L)-HRP antibody (1706516, Bio-Rad) 1:10000 in blocking buffer ...
-
bioRxiv - Biochemistry 2024Quote: ... Lysates were diluted 1:1 with 2× Laemmli buffer (Bio-Rad) supplemented with 54 mg ml-1 DTT ...
-
bioRxiv - Biochemistry 2021Quote: ... The protein was incubated at 4°C for 1 h with Bio-Beads™ SM-2 resin (Bio-Rad) equilibrated with 100 mM Tris-HCl ...
-
bioRxiv - Developmental Biology 2020Quote: ... Membranes were then washed 3 times for 5 min in TBST before detection using Clarity Western ECL Substrate (Bio-rad, 170-5061) and imaging on a ChemiDoc MP (Bio-rad ...
-
bioRxiv - Molecular Biology 2021Quote: ... Cells were incubated for 1hr on ice with varying concentrations of fluorescently labeled hybridoma-derived or recombinant mAbs and then washed x3 in flow buffer (PBS + 3% fetal calf serum) prior to analysis on a ZE5 flow cytometer (BioRad, Hercules, CA). Equilibrium binding affinities were calculated via nonlinear regression (One site – total and non-specific binding ...
-
bioRxiv - Molecular Biology 2020Quote: ... carried out in glass tubes filled with polyacrylamide gel using a mixture of ampholytes 3/10 and 5/8 (Bio-Rad, USA) overnight at 4 °C ...
-
bioRxiv - Bioengineering 2022Quote: ... 6 ng of cDNA was used per qPCR reaction consisting of gene-specific primers (Supplementary Information Table 3) and amplified with the PowerSYBR Green Master Mix (Applied Biosystems in a CFX-96 thermocycler (Bio-Rad). Data was acquired using the Bio-Rad CFX Manager 3.1 ...
-
bioRxiv - Molecular Biology 2021Quote: ... Band intensities of at least 3 individual experiments were measured densitometrically and normalized to whole protein using the Image Lab Software 5.1 from BioRad (Biorad, Munich, Germany).
-
bioRxiv - Biochemistry 2020Quote: ... N-glycans were reduced with 1 M NaBH4 in 50 mM KOH for 3 h at 50°C then desalted and enriched offline using AG 50W-X8 (Bio-Rad, Australia) strong cation exchange followed by porous graphitized carbon (PGC ...
-
bioRxiv - Neuroscience 2022Quote: ... All reactions were performed using primers listed in the supplementary table 3 and the iTaq Universal SYBR Green Supermix (Bio-Rad Laboratories). Relative expression levels were determined according to the ΔΔCt method with the human housekeeping gene ABELSON as endogenous control for normalization as previously described (Beillard et al. ...
-
bioRxiv - Physiology 2021Quote: ... 95°C for 20 s followed by 40 cycles at 95°C for 3 s and 60°C for 30 s using a real-time thermal cycler (CFX Connect; BioRad, Hercules, CA).
-
bioRxiv - Immunology 2021Quote: ... cDNA synthesis was performed using 3 ng (neutrophils) and 10 ng (monocytes) of total RNA and iScript™ Reverse Transcription Supermix (Bio-Rad). Relative quantitation of mRNA expression levels was determined with CFX96 Touch™ Real Time PCR using SsoAdvanced™ Universal SYBR Green Supermix and PrimePCR™ Primers (Bio-Rad) ...
-
bioRxiv - Genomics 2020Quote: ... (see Supplementary Table 3 for a full list of oligos used in the present study) into 384-well hard-shell PCR plates (Bio-Rad HSP3901) using Mantis liquid handler (Formulatrix) ...
-
bioRxiv - Biochemistry 2022Quote: ... Enzyme purity and molecular weight were estimated using a 12% SDS-PAGE and mini-PROTEAN 3 system (BioRad, Hercules, California, United States). Gels were stained using PageBlue Protein Staining Solution (Thermo Fisher Scientific ...