Labshake search
Citations for Bio-Rad :
301 - 350 of 4571 citations for 7 Chloro 8 methyl 2 trifluoromethyl quinolin 4 ol since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2023Quote: ... for 7 min at 2.5A and 12V using a Trans-Blot® Turbo™ Transfer System (Bio-Rad #1704150EDU). Membranes were saturated in PBS (137 mM NaCl ...
-
bioRxiv - Cell Biology 2023Quote: ... Proteins were separated on 15% SDS-PAGE and were transferred to PVDF membrane under 2.5A/25V condition for 7 min using a semidry transfer system (Trans-Blot Turbo, BioRad). Transferred membranes were first blocked by TBS-Tween20 (0.1% ...
-
bioRxiv - Immunology 2024Quote: ... was introduced by electroporation (7 square wave pulses of 30 V, 3ms, 0,1s pause) using a GenePulser Xcell electroporator (Biorad) and a 1 mm cuvette (Biorad) ...
-
bioRxiv - Synthetic Biology 2024Quote: ... followed by incubation at 37 °C for up to 7 hours on a real-time qPCR instrument (Biorad, CFX96). To measure the time-dependent change in fluorescence ...
-
bioRxiv - Microbiology 2020Quote: ... loaded onto a lab-made 8% TBE gel (Acrylamide/Bis solution 37.5:1, Bio-rad, 1610148), run at 200V for 1 hour ...
-
Trypanosoma brucei J protein 2 functionally cooperates with the cytosolic Hsp70.4 and Hsp70 proteinsbioRxiv - Molecular Biology 2019Quote: ... and subsequently quantified using densitometric analysis using the Image Lab v5.1 built 8 (Bio-Rad, USA). A negative control of BSA (0.75 μM ...
-
bioRxiv - Biophysics 2019Quote: ... glucose was added to make 8% final concentration and loaded onto commercial Criterion Precast Gel (Biorad) 5% TBE ...
-
bioRxiv - Cancer Biology 2019Quote: ... DNA template (8 μL) was added to 10 μL of ddPCR Supermix for Probes (Bio-Rad) and 2 μL of the primer/ probe mixture ...
-
bioRxiv - Cell Biology 2019Quote: ... 10 μL of lysate was resolved on 8% SDS-PAGE and transferred to Nitrocellulose membrane (BioRad). Membranes were blocked with 5% milk in Tris-buffered saline with 1% Tween 20 (TBST ...
-
bioRxiv - Physiology 2021Quote: ... Relative protein abundance (N=6-8) were quantified using the Image Lab software (version 6.0.1; BioRad) and normalized by the protein content in each lane.
-
bioRxiv - Immunology 2022Quote: ... Proteins were subjected to 8–12% SDS-PAGE and transferred to PVDF membranes (Bio-Rad Laboratories). The membranes were blocked with 5% skim milk and then treated with Trim28 primary and anti–rabbit IgG (Cell Signaling Technology ...
-
bioRxiv - Molecular Biology 2023Quote: ... the nuclear fraction proteins were resolved on gradient 8-16% gels (mini-PROTEAN TGX, Bio-Rad). Resolved proteins were transferred to nitrocellulose membranes (Trans-blot Turbo ...
-
bioRxiv - Microbiology 2023Quote: ... 8 μL of sample or buffer or protein standards solution (Precision Plus Protein Kaleidoscope, Bio-rad) were loaded per well of pre-cast 12 % polyacrylamide gel (10-well Mini-PROTEAN TGX ...
-
bioRxiv - Biochemistry 2023Quote: ... was prepared for electrophoresis and loaded onto an 8-16% Mini-Protean TGX gels (Bio-rad). Following this ...
-
bioRxiv - Microbiology 2023Quote: ... Elution fractions were analyzed on 8–16% SDS-PAGE (mini-PROTEAN TGX protein gels; Bio-Rad) and fractions containing the gp120 glycoprotein were concentrated followed by buffer exchange to PBS using Vivaspin 6 centrifugal concentrators (30kDa ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... Samples were run on 8% SDS-PAGE gel for 1 hour at 175V (Tetra cell, BioRad). Following migration ...
-
bioRxiv - Microbiology 2022Quote: ... and 4 µg of protein was separated by SDS-PAGE using pre-cast TGX 4-15% gradient gels (BioRad). Protein was transferred to a 0.45 µm nitrocellulose membrane ...
-
bioRxiv - Neuroscience 2022Quote: ... Protein samples were run on 4-20% precast polyacrylamide gel (4-20% Mini-PROTEAN TGX Precast Protein Gels, BioRad) to separate them and transferred onto PVDF membranes using semi-dry transfer ...
-
bioRxiv - Cell Biology 2023Quote: ... SDS–PAGE was carried out using 4-15% or 4-20% precast polyacrylamide gels (Bio-Rad, 4561086 or 4561093) and run at a constant voltage of 80 V for 5 min followed by 120 V for 1 h ...
-
bioRxiv - Cancer Biology 2023Quote: ... The eluent was isolated by centrifugation at 100 g for 4 min at 4°C (Bio-Rad 732-6204), buffer exchanged (Amicon Ultra 10 kDa MWCO UFC501024 ...
-
bioRxiv - Genomics 2024Quote: ... samples were embedded in a thin polyacrylamide film by inverting them onto a GelSlick-coated microscope slide with a droplet of 4% acrylamide solution (4% v/v 20:1 acrylamide:bis-acrylamide [BioRad, 1610144] with 0.15% v/v TEMED [Sigma ...
-
bioRxiv - Cell Biology 2024Quote: ... with DTT and resolved on 4-15% 4-20% or 12% Mini-PROTEAN® TGX™ Precast Gels (Biorad) run in Tris/Glycine/SDS running buffer (Biorad) ...
-
bioRxiv - Molecular Biology 2024Quote: ... and the samples were separated on 4-20% or 4-15% Mini-PROTEAN TGX Precast Protein Gels (BioRad Laboratories). The gel was transferred to a PVDF membrane using the iBlot transfer system (ThermoFisher) ...
-
bioRxiv - Immunology 2021Quote: ... then blocked with 2% blocking buffer (PBS + 2% non-fat dry milk (Bio-Rad) + 2% goat serum + 0.05% Tween-20 ...
-
bioRxiv - Immunology 2022Quote: ... then blocked with 2% blocking buffer (PBS + 2% non-fat dry milk (Bio-Rad) + 2% goat serum + 0.05% Tween-20 ...
-
bioRxiv - Cell Biology 2021Quote: ... DNA samples (3 μl) and master mixes (7 μl) were pipetted into a 96-well PCR plate (Bio-Rad #MLL9651) and PCR amplification performed using the CFX96 Touch Real-Time PCR Detection System (Bio-Rad) ...
-
bioRxiv - Genetics 2021Quote: ... Proteins (7 μl of extract) were separated on Laemmli SDS-PAGE gels and transferred to nitrocellulose membranes (Bio-Rad, 1620112). Membranes were stained with Ponceau-S for visualization ...
-
bioRxiv - Immunology 2021Quote: ... A 2.7 μL aliquot from each sample was mixed with 2.5 μL of SsoFast EvaGreen Supermix with Low Rox (Bio-Rad) and 0.25 μL of Fluidigm’s DNA Binding Dye Sample Loading Reagent in a separate plate and centrifuged to mix solutions ...
-
bioRxiv - Plant Biology 2021Quote: ... Total proteins were separated by electrophoresis in 7% SDS-polyacrylamide gels and electrophoretically transferred to a polyvinylidene fluoride membrane according to the manufacturer’s protocol (Bio-Rad). Transferred proteins were detected with Ponceau-S ...
-
bioRxiv - Molecular Biology 2020Quote: ... Proteins were transferred onto nitrocellulose membranes using either a Trans-Blot® Turbo™ Transfer System (7 minutes, 25V, BioRad) or an iBlot™ 2 Dry Blotting System (P0 method ...
-
bioRxiv - Molecular Biology 2020Quote: ... Running buffer was prepared with tris-glycine 1X and SDS 0.1% using a homemade gel (7-12% bis-acrylamide, Bio-Rad), which ran at 100 V for approximately 2:30 h ...
-
bioRxiv - Molecular Biology 2020Quote: ... Samples were in-gel rehydrated for 16 hrs and isoelectrically focused on 7 cm pH 3-10 IPG strips to 10,000 Vh on a Protean® IEF Cell (BioRad). After focusing ...
-
bioRxiv - Biochemistry 2022Quote: ... Insoluble material was pelleted by repeated ultracentrifugation and the supernatant recovered and loaded onto an hydroxyapatite column (7 g dry-weight resin, Biorad 130-0420, hydrated and packed in a disposable chromatography column, Biorad 732-1010 ...
-
bioRxiv - Biochemistry 2022Quote: ... Insoluble material was pelleted by repeated ultracentrifugation and the supernatant recovered and loaded onto an hydroxyapatite column (7 g dry-weight resin, Biorad 130-0420 ...
-
bioRxiv - Molecular Biology 2022Quote: ... Samples were resolved on native acrylamide gels containing 0.5X TBE buffer and 7% acrylamide (made from a stock of 40% acrylamide with a ratio of 29:1 acrylamide:bisacrylamide; Bio-Rad). The running buffer for the gels was 1XTBE ...
-
bioRxiv - Physiology 2022Quote: ... and was and then electrophoretically separated at 240V for 22 minutes on a 7-12% TGX gradient gel (BioRad, 4568081). Proteins were then transferred to a PVDF membrane using a BioRad Trans Blot Turbo ...
-
bioRxiv - Biochemistry 2019Quote: ... autophosphorylation reactions were separated on SDS-PAGE gels and transferred to 0.2 µm nitrocellulose membranes at 25 V for 7 mins using Trans-Blot Turbo Transfer system (Bio-Rad). Membranes were blocked with BSA and incubated with primary mouse anti-phosphotyrosine antibody (PY20 ...
-
bioRxiv - Bioengineering 2019Quote: Native PAGE gels were prepared as follows: a fresh solution comprising of polyacrylamide (19:1) at final concentrations from 7 to 13% (Biorad), 0.5x TBE buffer (45 mM Tris-borate ...
-
bioRxiv - Genetics 2020Quote: ... Cell lysates were clarified by centrifugation at 6,000 rpm for 7 min and protein concentration was determined using a DC protein assay kit (Bio-Rad). Samples containing equal amounts of protein were brought to a total volume of 1 ml with appropriate buffer.
-
bioRxiv - Microbiology 2023Quote: ... gels were briefly washed with water and proteins were transferred (25 V, 1.3 A, 7 min) onto nitrocellulose membranes (Bio-Rad) using Bio-Rad Trans Blot Turbo Transfer system ...
-
bioRxiv - Cell Biology 2023Quote: ... phosphorylated in vitro by PLK-1 or CyclinB-Cdk1 as described (7) were separated on stain Free SDS-PAGE 10% gel (Biorad). The gel was imaged and then transferred to a PVDF membrane 0.45 µm during 1h30 at 90V ...
-
bioRxiv - Cell Biology 2023Quote: ... and were then transferred to polyvinylidene difluoride (PVDF) membrane using a semi-dry method with a Trans-Blot Turbo system for 7 minutes at 25V (BioRad). The membranes were probed with the rabbit polyclonal antibody against an amino-terminal region of β1 [21] ...
-
bioRxiv - Neuroscience 2023Quote: ... High integrity RNA (RIN > 7) was used to synthesize cDNA with iScript™ gDNA Clear cDNA Synthesis Kit (Bio-Rad). PCR primers for human B-ACTIN ...
-
bioRxiv - Biochemistry 2021Quote: ... Whole cell lysate samples containing 4 μg of protein were fractionated using a 4–20% SDS-PAGE gel (Bio-Rad). Proteins were transferred to a 0.2 μm nitrocellulose membrane using a Trans-Blot Turbo transfer system (Bio-Rad ...
-
bioRxiv - Molecular Biology 2020Quote: ... Proteins were separated at 175 V for 3-4 hours at 4°C and then transferred to nitrocellulose membrane (BioRad) by using a Criterion blot cell (BioRad ...
-
bioRxiv - Molecular Biology 2020Quote: ... The immunoprecipitates were resolved on 4-12% Criterion XT Bis-Tris or 4-20% Mini-Protean TGX precast gels (BioRAD) and transferred to Immobilon-FL PVDF membranes (Millipore) ...
-
bioRxiv - Cell Biology 2022Quote: ... 30 µg of total protein per sample was loaded on NuPage 4-12% Bis-Tris Protein gels (Thermo Fischer Scientific) or 4–15% Mini-PROTEAN TGX StainFree Protein gels (Biorad) and run at 200 V as per manufacturer’s instructions ...
-
bioRxiv - Biochemistry 2021Quote: ... pH 5.3 (murine P-domains) or pH 7.3 (GII.4 Saga P-domain) at 4 °C via Micro Bio-Spin 6 columns (Bio-Rad) according to the manufacturer’s protocol ...
-
bioRxiv - Developmental Biology 2022Quote: Cells in monolayer were fixed in 4% PFA for 20 minutes at 4°C and blocked for 30 minutes in 10% donkey serum (BioRad) and 0,1% Triton X-100 (Sigma-Aldrich) ...
-
bioRxiv - Cell Biology 2019Quote: ... Typically 10-25 μg total protein was separated on reducing SDS-PAGE (4-15% or 4-20% gradient gels, BioRad). Proteins were transferred to nitrocellulose membranes ...