Labshake search
Citations for Bio-Rad :
101 - 150 of 4745 citations for 2S 4S 4 Fmoc amino pyrrolidine 2 carboxylic acid methylester hcl since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2020Quote: ... TBST (50 mM Tris-HCl pH 7.4, 1% Triton X-100) with 5% non-fat milk (Bio-Rad) was used for blocking ...
-
bioRxiv - Plant Biology 2021Quote: ... heated to 60°C for 5 min and electrophoresed into a 12% Tris-HCl Criterion gel from BioRad at 50V for ∼20 min or until the dye front moved just below the bottom of the sample wells ...
-
bioRxiv - Microbiology 2023Quote: ... and equal amounts of supernatant and pellet were run on 10% Tris-HCl stain-free gels (Bio-Rad). Gels were imaged using Bio-Rad ChemiDocTM Touch Imaging System equipped with Image Lab Software (v ...
-
bioRxiv - Cell Biology 2023Quote: ... heated to 60 LJC for 5 min and electrophoresed into a 12% Tris-HCl Criterion gel from BioRad at 50 V for 20 min or until the dye front moved just below the bottom of the sample wells ...
-
bioRxiv - Neuroscience 2023Quote: The samples prepared as described above were separated using 15% Tris-HCl Criterion pre-cast gels (Bio-Rad) in SDS-PAGE ...
-
bioRxiv - Cancer Biology 2021Quote: ... 4-15% Tris-HCI 4 SDS-PAGE gels (Bio-Rad), separated at 120V ...
-
bioRxiv - Neuroscience 2021Quote: ... Samples were then loaded onto 4-15% Criterion™ TGX™ Precast Midi Protein Gels (12 + 2 wells, 45 μl) (Bio-Rad) and subjected to SDS-PAGE at 200 V for ~45 min in 10× Tris/Glycine/SDS running buffer (Bio-Rad) ...
-
bioRxiv - Plant Biology 2020Quote: ... Incubate 1 μL of reticulocyte extract before binding with beads and 2 μL of extract after the binding was used for each western on a precast gel (4–20% Criterion™ TGX™ Precast Midi Protein Gel, 12+2 well, 45 μl, BioRad). Before loading ...
-
bioRxiv - Cell Biology 2021Quote: ... 1∼2 μg of total protein for each lane) was loaded on a precast 4-20% gradient polyacrylamide gel (PAGE, Bio-Rad: 4561096) and electrophoresed at a constant voltage of 200 V for 35 min ...
-
bioRxiv - Cancer Biology 2024Quote: ... Protein pellet was resuspended in UTC buffer (8 M urea, 2 M thiourea, 4% CHAPS) and quantified using RC DC™ Protein Assay Kit (Bio-Rad). Sample with 80 µg proteins resuspended in rehydration buffer (8 M urea ...
-
bioRxiv - Immunology 2023Quote: Serum binding antibody assays were performed to evaluate IgG responses to SARS-CoV-2 nucleocapsid and ancestral spike S2 domains and RBD using the Bio-Plex Pro Human SARS-CoV-2 IgG (N, S2, RBD) 4-Plex Panel serology assay (Bio-Rad 12014634) as previously described (8).
-
bioRxiv - Biophysics 2023Quote: ... The mixture was incubated for 1-2 h at 4 °C and incubated overnight with pre-washed bio-beads (Bio-Rad Laboratories) at 4 °C ...
-
bioRxiv - Pathology 2024Quote: ... Samples were separated by electrophoresis for 2 hr at 60-100 V using 4% to 20% precast gradient gels (MiniPROTEAN TGX; Bio-Rad, #4561094) in 1X SDS-Tris-glycine buffer (Bio-Rad ...
-
bioRxiv - Pathology 2024Quote: ... the samples were separated by electrophoresis for 2 hours at 60-100 V using 4% to 20% precast gradient gels (Mini-PROTEAN TGX; Bio-Rad, #4561094) in 1X SDS-Tris-Glycine buffer (Bio-Rad ...
-
bioRxiv - Cell Biology 2024Quote: The autophagosome preparations (in 2×Laemmili buffer) or 10 μg total tissue lysates (in 2×Laemmili buffer) were run into 4–20% precast gel (Bio-Rad, 4561094) for around 1 cm distance ...
-
bioRxiv - Biochemistry 2024Quote: ... 4-20% (BioRad), or 6% (Thermofisher ...
-
bioRxiv - Immunology 2021Quote: ... purified recombinant NP samples were loaded to a 15% SDS-PAGE and then transferred to a nitrocellulose membrane of 0.2 μm cutoff using Tris-Methanol buffer (25mM TRIS-HCl, 192 mM glycine, 20% methanol, 0.1% SDS) in a Semi-Dry system (BioRad). The NP-containing membrane was then divided in test strips.
-
bioRxiv - Biochemistry 2020Quote: ... which was conducted using a Criterion Tris-HCl Gel system following the manufacture instructions (Bio-Rad Laboratories, Hercules, CA). After SDS-PAGE electrophoresis ...
-
bioRxiv - Biochemistry 2020Quote: ... equilibrated with nanodisc buffer (100 mM KCl and 20 mM Tris/HCl pH 7.5) using an NGC Quest 10 chromatography system (BioRad). Concentration of ABCB10 in nanodiscs was estimated from Coomassie-stained gels using aliquots of known concentration of ABCB10 in detergent as reference ...
-
bioRxiv - Molecular Biology 2022Quote: ... The proteins were resuspended in 20µl of 20mM Tris-HCl pH 7.5 and then denatured by addition of 2X Laemmli loading buffer (Laemmli 4X (Biorad): 277.8mM Tris-HCl pH6.8 ...
-
bioRxiv - Immunology 2020Quote: ... in Tris glycine (TG) buffer (20 mM Tris-HCl pH 8.3, 150 mM glycine) using the Turboblot system (BioRAD). Membranes were blocked in 5 % milk in Tris-buffered saline (10 mM Tris ...
-
bioRxiv - Neuroscience 2022Quote: ... Equal amounts of protein were loaded onto 10% or 12% pre-cast Tris-HCl Mini-PROTEAN gels (Bio-Rad) and proteins separated by electrophoresis ...
-
bioRxiv - Neuroscience 2022Quote: ... The membranes were blocked in Tris-buffered saline (TBS, 50mM Tris, 150mM NaCl, HCl to pH 7.6) + 0.1% Tween 20 (Bio-Rad) + 5% non-fat dry milk (LabScientific ...
-
bioRxiv - Molecular Biology 2024Quote: ... gel at 150 V for 2 h and transferred onto a PVDF membrane at 25 V for 2 h in transfer buffer (3.03g Tris–HCl, 14.4g glycine, 20% methanol) using a semi-dry transfer apparatus (Bio-Rad). After transfer ...
-
bioRxiv - Molecular Biology 2023Quote: ... Signal was detected using the HCL kit (ECLTM Primer Western Blotting Detection Reagent, AmershamTM) and a Chemidoc system (Biorad). Signal were quantified with the ImageLab Software.
-
bioRxiv - Neuroscience 2024Quote: ... The protein lysates were then loaded onto an 10% Ready Gel® Tris- HCl Precast Gels (BioRad, catalog#1611119) in running Buffer (BioRad ...
-
bioRxiv - Cell Biology 2022Quote: ... in 4°C for 2-4 hours and the beads were then isolated and eluted through a Bio-Spin® Chromatography Column (Bio-Rad, #7326008) with elution buffer (5 0mM Tris-HCl pH 8 ...
-
Gatekeeper helix activates Golgi SM protein Sly1 and directly mediates close-range vesicle tetheringbioRxiv - Cell Biology 2020Quote: ... The resulting mixtures were dialyzed (20 kDa cutoff) for ∼18h at 4°C in the dark against 250 volumes of FB160M1 containing 2 g BioBeads SM2 (Bio-Rad, Hercules, CA) per 2 mL of RPL mixture ...
-
bioRxiv - Microbiology 2020Quote: ... denatured at 95°C for 2 min and amplified for 24 cycles (95°C 15 seconds, 60°C, 4 min) on T100 PCR instrument (Biorad, Hercules, CA, USA). At the end of this process ...
-
bioRxiv - Molecular Biology 2021Quote: ... The dried pellets enriched for histones were dissolved in sample buffer (8 M urea, 5% β-mercaptoethanol and 10 mM Tris-HCl (pH 7.0)) and added sample loading buffer (Biorad XT sample buffer ...
-
bioRxiv - Biochemistry 2020Quote: ... proteins were dialyzed in HEPES sodium salt-HCl (75 mM, pH 7.0) with Chelex-100 resin (5 g/L, Bio-Rad) to remove any divalent metal contaminants ...
-
bioRxiv - Microbiology 2020Quote: A 5X isothermal assembly reaction buffer (500 mM Tris-HCL pH 7.5, 50 mM MgCl2, 50 mM DTT (Bio-Rad), 31.25 mM PEG-8000 (Fisher Scientific) ...
-
bioRxiv - Microbiology 2021Quote: Isothermal assembly reaction buffer (5×) (500 mM Tris-HCl [pH 7.5], 50 mM MgCl2, 50 mM dithiothreitol [DTT] [Bio-Rad] ...
-
bioRxiv - Bioengineering 2020Quote: 50 μL of PCR mastermix solution in Nuclease-free ultrapure water contained 60 mM Tris-HCl Buffer pH 8.8 (Bio-Rad), 200 μM dNTPs ...
-
bioRxiv - Bioengineering 2020Quote: ... 50 μL of PCR mix solution in nuclease-free water contained 60 mM Tris-HCl Buffer pH 8.8 (Bio-Rad), 200 μM dNTPs ...
-
bioRxiv - Neuroscience 2023Quote: ... 15 μg of total protein per sample was loaded into separate lanes on a precast 10–20% electrophoresis gel (Tris-HCl polyacrylamide, BioRad). The blotRig software helps counterbalance sample positions across the gel by treatment condition. ...
-
bioRxiv - Neuroscience 2023Quote: ... and the samples were boiled in SDS loading buffer and loaded onto 15% Tris-HCl pre-cast gels (Bio-Rad) for Western blotting analysis.
-
bioRxiv - Microbiology 2022Quote: ... a 5X isothermal assembly reaction buffer (500 mM Tris-HCL pH 7.5, 50 mM MgCl2, 50 mM DTT (Bio-Rad), 31.25 mM PEG-8000 (Fisher Scientific) ...
-
bioRxiv - Plant Biology 2024Quote: ... Beads were then mixed with 60 µL Tris-HCl pH 8.0 and 20 µL of 4x Laemmli Sample Buffer (BIO-RAD) for 10 minutes at 95 °C ...
-
bioRxiv - Biochemistry 2024Quote: Unpolymerized 10% Tris-HCl gel solution (250 mL) was prepared by combining 30% bis/acrylamide (83.33 mL, #1610156, BIO-RAD), 1.5M Tris-HCl ...
-
bioRxiv - Cancer Biology 2021Quote: ... The sample with fragmented RNA was neutralized with 1M Tris-HCl pH 6.8 and isolated by passing through P-30 column (Biorad, #732-6250). The NRO-reaction products containing biotinylated RNA was purified using Streptavidin C1 beads which were washed thrice with wash buffer (0.1N NaOH ...
-
bioRxiv - Immunology 2021Quote: ... and 2D-sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) replicates performed on 11cm 8-16% (w/v) polyacrylamide/Tris-HCl gels (Bio-Rad) using a Criterion Dodeca Cell (Bio-Rad) ...
-
bioRxiv - Microbiology 2021Quote: ... Viral particles were mixed with 2X SDS samples buffer and separated by SDS-PAGE using Tris-HCl ready gels (Bio-Rad). Cell lysates were prepared as previously described (Thippeshappa et al. ...
-
bioRxiv - Neuroscience 2021Quote: ... Protein (15-20 μg/per lane for most blots) was electrophoresed on Tris-HCL polyacrylamide gels and transferred to nitrocellulose membranes (Bio-Rad) for 90 minutes at 4°C ...
-
bioRxiv - Biochemistry 2024Quote: ... Gels were then stained with Coomassie Brilliant Blue G (80 mg dissolved in 1 L water with 30 mM HCl) and destained with water before visualising using a ChemiDoc MP Imaging System (Bio-Rad). For mNeonTP-loaded encapsulins ...
-
bioRxiv - Microbiology 2022Quote: ... The pellet obtained was dissolved in 10 μL of 20 mM Tris-HCl (pH 7.2) and 10 μL of Laemmli sample buffer (Mini-PROTEAN® Tetra Cell-Bio-Rad). The solubilized proteins were heated (95 °C ...
-
bioRxiv - Biochemistry 2024Quote: ... pH 7.6 with HCl) for one hour and then divided for blotting based on the prestained protein ladder (Bio-Rad, 1610373). Primary antibodies (see antibody table for vendor and dilutions ...
-
bioRxiv - Cell Biology 2021Quote: ... supplemented with 2 M 2-Mercaptoethanol (Bio-Rad), and boiled for 3 min ...
-
A tyrosine kinase protein interaction map reveals targetable EGFR network oncogenesis in lung cancerbioRxiv - Cancer Biology 2020Quote: ... 4 μl of the eluate was analyzed by 4-20% SDS PAGE (Biorad) and silver staining ...
-
bioRxiv - Plant Biology 2024Quote: ... 4× Laemmli buffer and 4-20% SDS-PAGE gels were purchased from BioRad.