Labshake search
Citations for Bio-Rad :
101 - 150 of 172 citations for 27 Carboxy 7 keto Cholesterol d4 since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2024Quote: ... was introduced by electroporation (7 square wave pulses of 30 V, 3ms, 0,1s pause) using a GenePulser Xcell electroporator (Biorad) and a 1 mm cuvette (Biorad) ...
-
bioRxiv - Synthetic Biology 2024Quote: ... followed by incubation at 37 °C for up to 7 hours on a real-time qPCR instrument (Biorad, CFX96). To measure the time-dependent change in fluorescence ...
-
bioRxiv - Molecular Biology 2022Quote: ... LarA extracted from a 7 cm prep well Mini-PROTEAN® TGX Stain-Free™ gel (#4568091, Bio-Rad) was used for affinity purification of the final antibody.
-
bioRxiv - Biochemistry 2023Quote: ... The gels were then transferred to a water-activated nitrocellulose membrane at 1.3A to 25V for 7 minutes (BioRad TurboBlotter ...
-
bioRxiv - Microbiology 2023Quote: ... for 7 min at 2.5A and 12V using a Trans-Blot® Turbo™ Transfer System (Bio-Rad #1704150EDU). Membranes were saturated in PBS (137 mM NaCl ...
-
bioRxiv - Cell Biology 2023Quote: ... Proteins were separated on 15% SDS-PAGE and were transferred to PVDF membrane under 2.5A/25V condition for 7 min using a semidry transfer system (Trans-Blot Turbo, BioRad). Transferred membranes were first blocked by TBS-Tween20 (0.1% ...
-
bioRxiv - Neuroscience 2024Quote: ... SOD1-containing fractions were then applied along immobilized pH gradient strips (ReadyStrip IPG Strips, pH 4-7, Bio-Rad) in duplicate and nIEF performed to further purify SOD1 according to its pI ...
-
bioRxiv - Cell Biology 2021Quote: ... DNA samples (3 μl) and master mixes (7 μl) were pipetted into a 96-well PCR plate (Bio-Rad #MLL9651) and PCR amplification performed using the CFX96 Touch Real-Time PCR Detection System (Bio-Rad) ...
-
bioRxiv - Genetics 2021Quote: ... Proteins (7 μl of extract) were separated on Laemmli SDS-PAGE gels and transferred to nitrocellulose membranes (Bio-Rad, 1620112). Membranes were stained with Ponceau-S for visualization ...
-
bioRxiv - Immunology 2021Quote: ... A 2.7 μL aliquot from each sample was mixed with 2.5 μL of SsoFast EvaGreen Supermix with Low Rox (Bio-Rad) and 0.25 μL of Fluidigm’s DNA Binding Dye Sample Loading Reagent in a separate plate and centrifuged to mix solutions ...
-
bioRxiv - Plant Biology 2021Quote: ... Total proteins were separated by electrophoresis in 7% SDS-polyacrylamide gels and electrophoretically transferred to a polyvinylidene fluoride membrane according to the manufacturer’s protocol (Bio-Rad). Transferred proteins were detected with Ponceau-S ...
-
bioRxiv - Molecular Biology 2020Quote: ... Proteins were transferred onto nitrocellulose membranes using either a Trans-Blot® Turbo™ Transfer System (7 minutes, 25V, BioRad) or an iBlot™ 2 Dry Blotting System (P0 method ...
-
bioRxiv - Molecular Biology 2020Quote: ... Running buffer was prepared with tris-glycine 1X and SDS 0.1% using a homemade gel (7-12% bis-acrylamide, Bio-Rad), which ran at 100 V for approximately 2:30 h ...
-
bioRxiv - Molecular Biology 2020Quote: ... Samples were in-gel rehydrated for 16 hrs and isoelectrically focused on 7 cm pH 3-10 IPG strips to 10,000 Vh on a Protean® IEF Cell (BioRad). After focusing ...
-
bioRxiv - Biochemistry 2022Quote: ... Insoluble material was pelleted by repeated ultracentrifugation and the supernatant recovered and loaded onto an hydroxyapatite column (7 g dry-weight resin, Biorad 130-0420, hydrated and packed in a disposable chromatography column, Biorad 732-1010 ...
-
bioRxiv - Biochemistry 2022Quote: ... Insoluble material was pelleted by repeated ultracentrifugation and the supernatant recovered and loaded onto an hydroxyapatite column (7 g dry-weight resin, Biorad 130-0420 ...
-
bioRxiv - Molecular Biology 2022Quote: ... Samples were resolved on native acrylamide gels containing 0.5X TBE buffer and 7% acrylamide (made from a stock of 40% acrylamide with a ratio of 29:1 acrylamide:bisacrylamide; Bio-Rad). The running buffer for the gels was 1XTBE ...
-
bioRxiv - Physiology 2022Quote: ... and was and then electrophoretically separated at 240V for 22 minutes on a 7-12% TGX gradient gel (BioRad, 4568081). Proteins were then transferred to a PVDF membrane using a BioRad Trans Blot Turbo ...
-
bioRxiv - Genetics 2020Quote: ... Cell lysates were clarified by centrifugation at 6,000 rpm for 7 min and protein concentration was determined using a DC protein assay kit (Bio-Rad). Samples containing equal amounts of protein were brought to a total volume of 1 ml with appropriate buffer.
-
bioRxiv - Microbiology 2023Quote: ... gels were briefly washed with water and proteins were transferred (25 V, 1.3 A, 7 min) onto nitrocellulose membranes (Bio-Rad) using Bio-Rad Trans Blot Turbo Transfer system ...
-
bioRxiv - Cell Biology 2023Quote: ... and were then transferred to polyvinylidene difluoride (PVDF) membrane using a semi-dry method with a Trans-Blot Turbo system for 7 minutes at 25V (BioRad). The membranes were probed with the rabbit polyclonal antibody against an amino-terminal region of β1 [21] ...
-
bioRxiv - Plant Biology 2023Quote: Shoot apices of reporter lines were dissected and fixed in 4% paraformaldehyde for 1 hour and embedded in 7% ultra low range agarose gel (BioRad). Fifty µm sections were prepared using a vibratome DTK-1000 (Dosaka ...
-
bioRxiv - Neuroscience 2023Quote: ... High integrity RNA (RIN > 7) was used to synthesize cDNA with iScript™ gDNA Clear cDNA Synthesis Kit (Bio-Rad). PCR primers for human B-ACTIN ...
-
Dynamic states of eIF6 and SDS variants modulate interactions with uL14 of the 60S ribosomal subunitbioRxiv - Biochemistry 2022Quote: ... The protein extract was solubilized in 2-D lysis buffer (30 mM Tris-HCl pH 8.8, containing 7 M urea, 2 M thiourea and 4% CHAPS. Protein concentration was measured using Bio-Rad protein assay method ...
-
bioRxiv - Cell Biology 2023Quote: ... phosphorylated in vitro by PLK-1 or CyclinB-Cdk1 as described (7) were separated on stain Free SDS-PAGE 10% gel (Biorad). The gel was imaged and then transferred to a PVDF membrane 0.45 µm during 1h30 at 90V ...
-
bioRxiv - Biochemistry 2023Quote: ... 15 µL bound and 7 µl input sample was separated on 4-15% TGX SDS-PAGE gel (BioRad #456-1086) and transferred to PVDF membrane (Immobilon-FL ...
-
bioRxiv - Biophysics 2024Quote: ... The GAPDH signal was used for Western blot normalization by the software Image Lab™ (BioRad; Version 6.1.0 Build 7). For comparison of expression levels ...
-
bioRxiv - Cell Biology 2024Quote: ... Western blots were imaged on BioRad ChemiDoc MP system and band densitometry quantitated using ImageLab (BioRad, version 6.1.0 build 7).
-
bioRxiv - Cell Biology 2024Quote: ... the solution was boiled for 2 x 7 min at 98°C and filtered through a 0.2 pm cellulose acetate membrane (Bio-Rad) with a 96-well vacuum Bio-Dot Apparatus (Bio-Rad ...
-
bioRxiv - Developmental Biology 2020Quote: ... 30 second at 72°C and a final extension of 7 minutes at 72 °C in a thermal cycler (T100TM Thermal Cycler, Bio-Rad). Five μl of PCR product was visualized on a non-denaturing 1% agarose gel with a 100bp ladder ...
-
bioRxiv - Neuroscience 2021Quote: ... 40 min) and were subsequently transferred to nitrocellulose membranes for semi-dry immunoblotting (25 V, 1,3 A, 7 min, Bio-Rad®). Membranes were dried 5 min at 37°C and then incubated with 5% non-fat dried milk in Tris-buffered salineTween-20® (TBST containing 28 mM Tris ...
-
bioRxiv - Plant Biology 2020Quote: ... Plates were incubated for 30 °C for 5 or 7 days and imaged using a ChemiDoc MP Imaging System (Bio-Rad).
-
bioRxiv - Microbiology 2021Quote: Two micrograms of each RNA sample was loaded on 10% polyacrylamide gels containing 7 M urea or loaded onto 10% Criterion TBE-urea precast gels (Bio-Rad) and electrophoresed at 85 V ...
-
bioRxiv - Pathology 2021Quote: ... Real-time PCR was performed on a QuantStudio 7 Flex Real-Time PCR System (Thermo-Fisher) using the iTaq Universal SYBR green Supermix (Bio-Rad). The following primer sequences were used ...
-
bioRxiv - Molecular Biology 2022Quote: ... 20-30 μg of total protein was resolved on 8-16% TGX stain-free gels and transferred onto nitrocellulose membrane using the Trans-Blot Turbo RTA Transfer kit and the Trans-Blot Turbo Transfer system set to 7 min transfer protocol (all from Bio-Rad). Stain-free gel and blots were imaged using the Gel Doc EZ imaging system (Bio-Rad ...
-
bioRxiv - Microbiology 2022Quote: ... Proteins were transferred electrophoretically at a constant voltage of 25 V for 7 min using a Trans-Blot Turbo Transfer System (Bio-Rad). After transfer ...
-
bioRxiv - Synthetic Biology 2020Quote: ... under constant electric current of 0.1 A per gel and voltage of 5-7 V using Trans-Blot SD Semi-Dry Transfer Cell (Bio-Rad, USA). Alternatively ...
-
bioRxiv - Immunology 2021Quote: ... P2 was dialyzed against 1% glycine containing 2% ampholytes pH 3-10 (first run) or pH 5-7 (second run) and then loaded onto a liquid isoelectric focusing system (Rotofor, Bio-Rad). Individual fractions were harvested and their pH and absorbance at 280nm were measured ...
-
bioRxiv - Immunology 2021Quote: ... pooled and subjected to two consecutive preparative isoelectric focusing (IEF) at pH 3-10 (first separation) and pH 5-7 (second separation) using a Rotofor Cell (Bio-Rad). The individual IEF fractions were harvested ...
-
bioRxiv - Microbiology 2021Quote: ... Plates were incubated at 30 °C for 7 days and imaged daily using a gel documentation system (Gel Doc™ XR+, BIORAD). When needed ...
-
bioRxiv - Biochemistry 2020Quote: ... the buffer of the purified DNAJB6 was exchanged into 10 mM ammonium acetate pH 7 solution using Micro Biospin P6 centrifuge columns (Bio-Rad) and protein concentration determined using a NanoDrop spectrophotometer (Thermo Fisher Scientific ...
-
bioRxiv - Microbiology 2024Quote: Total RNA was loaded onto 8 to 12% PAGE–7 M urea gels and transferred to Hybond-N+ (GE) membranes using a Trans-Blot Turbo Transfer system (Bio-Rad) in 1X TBE ...
-
bioRxiv - Cell Biology 2023Quote: Protein samples were resolved on 7-15% gradient polyacrylamide (SDS-PAGE) gels and transferred to nitrocellulose membranes via Trans Blot Turbo (Bio-Rad). Membranes were then blocked with 5% milk in Tris-buffered saline and 0.05% Tween 20 (TBST ...
-
Modifications in the T arm of tRNA globally determine tRNA maturation, function and cellular fitnessbioRxiv - Molecular Biology 2023Quote: ... RNA was transferred to a nylon membrane (Amersham Hybond-XL) at 23 V for 7 minutes using a Trans-Blot Turbo Transfer System (Bio-Rad). Following transfer ...
-
bioRxiv - Microbiology 2024Quote: Total RNA was loaded onto 8 to 12% PAGE–7 M urea gels and transferred to Hybond-N+ (GE) membranes using a Trans-Blot Turbo Transfer system (Bio-Rad) in 1X TBE ...
-
bioRxiv - Cell Biology 2024Quote: ... using the BioRad Mixed Molecular Weight Protein Transfer setting (7 min, 1.3 A, 25 V) on the Trans-Blot Turbo Transfer System (Bio-Rad, 1704150) with Trans-Blot Turbo Transfer Buffer (Bio-Rad ...
-
bioRxiv - Microbiology 2024Quote: ... Proteins were transferred to a nitrocellulose membrane for 7 min using the Turbo midi protocol on the Trans-Blot Turbo transfer system (Bio-Rad). Membranes were blocked in blocking solution (5% milk in PBS with 0.1% Tween-20 ...
-
bioRxiv - Cell Biology 2024Quote: ... DNA samples (3 μL) and master mixes (7 μL) were pipetted into a 96-well PCR plate (Cat# MLL9651, Bio-Rad), and PCR amplification was performed using the CFX96 Touch Real-Time PCR Detection System (Bio-Rad) ...
-
bioRxiv - Molecular Biology 2024Quote: ... with a final heating at 72°C for 7 minutes in a Bio-Rad Thermal Cycler (Bio-Rad Laboratories Inc., USA). The second reaction was prepared similarly to the first round ...
-
bioRxiv - Biophysics 2020Quote: ... 50 µl of a 10− 6 M biotinylated and 10−7 M dye-coupled oligonucleotide solution were co-incubated to anneal the oligonucleotides at 80 °C using a Thermocycler (BioRad, C1000 ThermoCycler), followed by sample cooling to 4 °C with -1 °C/min ...