Labshake search
Citations for Bio-Rad :
1401 - 1450 of 4891 citations for 1 2 Chloropyridin 3 yl 3 3 dimethylazetidin 2 one since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2023Quote: ... 1.0 µg purified plasmid DNA was added to 0.2 ml aliquot of the above-prepared fusobacterial cells in a pre-cooled corvette (0.1 cm electrode gap, Bio-Rad) and left on ice for 10 minutes ...
-
bioRxiv - Microbiology 2023Quote: ... 10 min), centrifuged (1,000 x g, 2 min) and loaded on 10% or 4–20% SDS-PAGE gel (Bio-Rad). Following electrophoresis (60 min ...
-
bioRxiv - Cell Biology 2023Quote: ... then the pellet was resuspended in 212 µL of Laemmli sample buffer with 2-mercaptoethanol added (Bio-Rad, Hercules, CA). To neutralize the residual TCA ...
-
bioRxiv - Microbiology 2022Quote: ... competent cells were mixed with 500 ng of DNA in electroporation cuvettes (2 mm gap) and the reactions were electroporated (2.5 kV) using a MicroPulser electroporator (Bio-Rad). Electroporated cells were recovered in 1 mL LB (unless otherwise stated ...
-
bioRxiv - Developmental Biology 2022Quote: ... Protein lysates in Laemmli buffer were separated by electrophoresis on 12% SDS-PAGE gels and transferred for 2 hours at 4°C on to a PVDF membrane (BioRad). After blocking for an hour in 5% dry milk ...
-
bioRxiv - Microbiology 2023Quote: ... PCR products were run on 2% TBE agarose gel and post-stained with ViSafe Red Gel Stain (Vivantis Technologies) and visualised using GelDoc (BioRad). The relative intensity of the bands was quantified using ImageJ ...
-
bioRxiv - Immunology 2024Quote: ... mixed with 25 μl 1.5 mM CaCl2 and 42 μl ddH2O using 2 mm gap cuvettes with 3.5 msec/500 volt in BIORAD Gene Pulser Xcell Electroporation System (BioRad, USA). Transfected cells were immediately transferred into 5 mL prewarmed medium in 25 cm2 flasks and left to recover overnight at 26 °C ...
-
bioRxiv - Microbiology 2023Quote: ... cells and plasmids in 10% glycerol were first heat-shocked at 56°C for 2 min followed by immediate electroporation in 0.1-cm cuvette (Bio-Rad) using electroporation program of 2.5 kV and time constant of 2.3-2.5 ms on the Bio-Rad Micropulser ...
-
bioRxiv - Microbiology 2024Quote: ... 0.2 μM of each primer and 2 μl of template cDNA on a CFX Connect Real-Time System (Bio-Rad). Samples and plasmid standards were amplified using the following protocol ...
-
bioRxiv - Cell Biology 2023Quote: ... Cell pellets were resuspended by addition of ice-cold PBS supplemented with 2% FBS and counted using a TC-20 cell counter (BioRad). 2.5-5x105 cells were harvested ...
-
bioRxiv - Microbiology 2023Quote: ... The mixture was allowed to stand at room temperature in the dark for 30 min before the detergent was removed by successive addition of BioBeads SM-2 (BioRad). Nanodiscs were concentrated using Vivaspin® 500 centrifugal filters (10 kDa MWCO PES membrane).
-
bioRxiv - Biophysics 2023Quote: ... and yeast cell growth was monitored by measuring the OD600 at 2 h increments in a microplate reader (Benchmark Plus, BioRad). The remainder of the 10 ml cultures was used to assess Pgp expression by Western blot analysis of microsomal membrane preparations using the monoclonal C219 anti-Pgp antibody.
-
bioRxiv - Microbiology 2023Quote: ... Relative expression was determined using the 2−ΔΔCT method129 as part of the CFX Maestro for Mac 1.0 software package (Bio-Rad).
-
bioRxiv - Microbiology 2023Quote: ... 0.2 μM of each primer and 2 μl of template cDNA on a CFX Connect Real-Time System (Bio-Rad). Duplicates of samples and plasmid standards were amplified by using the following protocol ...
-
bioRxiv - Biochemistry 2022Quote: ... The other two lanes were incubated with 1xTris/glycine/SDS buffer for 15 min and then incubated with 2 x Laemmli sample buffer (BioRad) for 15 min ...
-
bioRxiv - Cell Biology 2022Quote: ... and the nuclear ACTIN locus (Supplementary Table 2) were independently amplified from 12.5 ng of total genomic DNA with ssoAdvanced SYBR Green Supermix (Bio-Rad) in a total volume of 10 μl with standard cycling condition suggested by Bio-Rad ...
-
bioRxiv - Cancer Biology 2022Quote: ... before solubilisation in 2% SDS and subsequent OD595 measurements were obtained using an iMark microplate reader (Bio-Rad, Laboratories, Inc.). The number of adherent cells was claculated by the confluence in each concentration of CB-839/UK-5099 at 72 hours ...
-
bioRxiv - Biochemistry 2022Quote: ... were exchanged from size exclusion buffer into 2 M ammonium acetate pH 7.4 via a single-pass through a Bio-Spin P-6 column (Bio-Rad). Buffer-exchanged protein was loaded into gold-coated glass capillaries (1.0 mm OD/0.75 mm inner diameter with filament) ...
-
bioRxiv - Bioengineering 2022Quote: RNA was extracted as described above, followed by RT-PCR using the Allplex SARS-CoV-2 assay (SeeGene, South-Korea) on a CFX96 thermocycler (Biorad), simultaneously detecting four different target genes ...
-
Dynamic states of eIF6 and SDS variants modulate interactions with uL14 of the 60S ribosomal subunitbioRxiv - Biochemistry 2022Quote: ... The protein extract was solubilized in 2-D lysis buffer (30 mM Tris-HCl pH 8.8, containing 7 M urea, 2 M thiourea and 4% CHAPS. Protein concentration was measured using Bio-Rad protein assay method ...
-
bioRxiv - Cell Biology 2022Quote: ... Approximately 75 islets were sandwiched in a chamber between two layers of Bio-Gel P-2 (Bio-Rad, Cat#1504118) bead solution (200 mg beads/ml in KRB buffer) ...
-
bioRxiv - Plant Biology 2022Quote: ... Then 2 μl of 10 times diluted cDNA was used for CFX96 Touch Real-Time PCR Detection System (Bio-Rad) for Syber green based quantitative PCR analysis ...
-
bioRxiv - Zoology 2022Quote: ... and folded by heating to 95°C for 2 min and slowly cooling down at 0.1 °C per second using a thermocycler (Bio-Rad). DsRNA concentrations were adjusted to 3 or 14 μg / μl using SpeedVac Concentrator (Thermo Scientific ...
-
bioRxiv - Microbiology 2022Quote: ... The resulting cDNA was diluted 1:10 and 2 µL was used for qPCR amplification of SARS-CoV-2 spike using iTaq Universal SYBR Green Supermix according to the manufacturer’s protocol (Bio-Rad). Copy number was calculated in reference to a standard curve of known copy number (102 – 107 copies spike) ...
-
bioRxiv - Synthetic Biology 2022Quote: ... the mixture was transferred to ice-cold electroporation cuvettes with a 2 mm gap (Bio-Rad Laboratories GmbH, Germany, #1652086). Electroporation was performed using the MicroPulser Electroporator (Bio-Rad Laboratories GmbH ...
-
bioRxiv - Synthetic Biology 2023Quote: ... and incubated for 24 h in a thermal gradient using a DNA Engine Tetrad 2 Peltier Thermal Cycler (Bio-Rad) with the lid set to 50°C ...
-
bioRxiv - Genomics 2022Quote: ... Proteins were transferred to a 0.2 µm or a low-fluorescence 0.45 µm polyvinylidene difluoride (PVDF) transfer membrane using a Trans-Blot Turbo (Bio-Rad). Following antibody incubation ...
-
bioRxiv - Genomics 2023Quote: ... Gels were run in 1X tris-acetate SDS running buffer for 2 hour and transferred to a 0.45 μm PVDF membrane using the Turbo Trans-Blot transfer system (Bio-Rad) for 30 minutes ...
-
bioRxiv - Cell Biology 2023Quote: ... cDNA was generated from ∼2 ng of total RNA from each sample using iScript Reverse Transcription Supermix for qRT-PCR (170-8891; BioRad) according to manufacturer’s protocols ...
-
bioRxiv - Cell Biology 2023Quote: Whole-cell lysates for immunoblotting were prepared by dissolving cells in Laemmli Sample Buffer containing 5% 2-mercaptoethanol (Bio-Rad). Protein samples were loaded on 4-15% polyacrylamide gels (BioRad ...
-
bioRxiv - Microbiology 2023Quote: ... 390 μl of cells were mixed with 10 μg of in vitro transcribed RNA and added to a 2 mm electroporation cuvette (BioRad). BHK-21 cells were electroporated with 1 pulse at 1.2 kV ...
-
bioRxiv - Immunology 2024Quote: ... and dialyzed overnight at 4 °C into 4 L of Experimental Buffer (25 mM Tris, 100 mM NaCl, pH 7.4) with 2 g/L Chelex 100 resin (Bio-Rad) to chelate residual transition metal ions ...
-
bioRxiv - Microbiology 2024Quote: ... qPCR was performed using 2 µL of genomic DNA in SsoAdvancedTM Universal SYBR® Green Supermix (Bio-Rad, 172-5271) and primers for a 529-base pair repetitive element of T ...
-
bioRxiv - Microbiology 2024Quote: ... The was filtered through a 0.45 μm filter and His-MSI-2 was purified with HisTrapTM FF column (Cytiva) using the Econo Gradient Pump (BIORAD) according to the manufacturer’s protocol and overnight dialysis ...
-
bioRxiv - Microbiology 2024Quote: ... DD-HA-BFD2Δeif1.2 were subjected to electrophoresis using 10% polyacrylamide SDS-PAGE gels and transferred onto 0.45-µm nitrocellulose membranes (Bio-Rad) with wet/tank transfer system (Bio-Rad ...
-
bioRxiv - Immunology 2024Quote: ... and incubated in Radiance ECL HRP substrate (Azure Biosystems) for 2 min before visualization using the chemiluminescent setting on the ChemiDoc XRS+ (Biorad).
-
bioRxiv - Microbiology 2024Quote: ... qPCR was performed using 2 µL of genomic DNA in SsoAdvancedTM Universal SYBR® Green Supermix (Bio-Rad, 172-5271) and primers for a 529-base pair repetitive element of T ...
-
bioRxiv - Microbiology 2024Quote: ... and gene specific primers were used to amplify cDNA and products were resolved using a 2% agarose gel and imaged via the ChemiDoc Touch Imaging system (BioRad). Primer sequences for both qPCR and PCR can be found in Table 4 and Table 5 ...
-
bioRxiv - Microbiology 2024Quote: ... The PCR reaction mixture (25 μL total) consisted of 12.5 μL of 2× SYBR Green PCR Master Mix (Bio-Rad), 300 nmol each of forward and reverse primers ...
-
bioRxiv - Cell Biology 2024Quote: ... 500μL of sample was dialyzed (20 kDa cutoff) in 250 mL Buffer A with 0.5 g Biobeads SM-2 (Bio-Rad) for 16-18 hours at 4°C ...
-
bioRxiv - Immunology 2024Quote: ... incubated in Radiance ECL HRP substrate (Azure Biosystems) for 2 min and visualized using the chemiluminescent setting on a ChemiDoc XRS+ (Biorad).
-
bioRxiv - Molecular Biology 2024Quote: ... Gene-specific cDNA synthesis was carried out with 2 µg of mtRNA using the iScript Select cDNA Synthesis Kit (BioRad) and oligo 2278 (see Supplementary Table ST2) ...
-
bioRxiv - Microbiology 2024Quote: ... The ddPCR reaction mixture consisted of 12.5 µl of a 2× ddPCR Supermix for Probes no dUTP (1863024; Bio-Rad), 1.25 µl of each 20× primer-probe mix (Table 2) ...
-
bioRxiv - Neuroscience 2024Quote: ... Proteins were transferred on nitrocellulose membrane at 100V for 2 h using the Mini trans-blot cell (Bio-Rad, #1703930). Membranes were blocked with 5% skim milk diluted in PBST (PBS + 0.1% Tween 20 ...
-
bioRxiv - Biochemistry 2024Quote: ... Size Exclusion chromatography was performed using a column packed with Bio-Gel P-2 fine resins (Bio-Rad, Hercules, CA). HPLC analysis of compounds was performed on a Shimadzu LC-20A with a Waters XBridge BEH ...
-
bioRxiv - Cell Biology 2024Quote: ... IP samples or cell pellets resuspended in SDS sample buffer containing 2-mercaptoethanol were subjected to SDS-PAGE using a 4%-15% pre-cast gradient gel (BioRad), and transferred to a nitrocellulose membrane (BioRad ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... PCR products were mixed with TriTrack loading loaded on 2 % agarose gels containing 2 µg /100 ml Midori Green and PCR amplicons were visualised using a ChemiDoc XRS+ Molecular Imager (Biorad).
-
bioRxiv - Cell Biology 2024Quote: ... the solution was boiled for 2 x 7 min at 98°C and filtered through a 0.2 pm cellulose acetate membrane (Bio-Rad) with a 96-well vacuum Bio-Dot Apparatus (Bio-Rad ...
-
bioRxiv - Developmental Biology 2024Quote: ... the membrane was stained with Clarity Western ECL Substrate and visualized after a 2-minute incubation using the ChemiDoc MP Imaging System (BioRad).
-
bioRxiv - Immunology 2021Quote: ... and the ChemiDoc equipment with the Quantity One software (Bio-Rad Laboratories). Primary antibodies were used at 1:500 dilution ...