Labshake search
Citations for Bio-Rad :
1051 - 1100 of 6069 citations for 6 methyl 4 oxo 5 6 dihydro 4H thieno 2 3 b thiopyran 2 sulfonyl chloride since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biophysics 2021Quote: Cells were mounted on a 2% agarose pad containing resuspension medium using a gene frame (Bio-Rad). Cells were concentrated by centrifugation (3300g for 30 s ...
-
bioRxiv - Cell Biology 2021Quote: ... for 2 hours at room temperature before signal development with Western ECL Substrate (Bio-Rad Laboratories, #1705061) and imaging under ChemiDoc XRS+ System (Bio-Rad Laboratories).
-
bioRxiv - Immunology 2019Quote: ... fluorescence images were acquired before and after a 2 min incubation after trypan blue (0.1%; Bio-Rad), which was added carefully to minimize sample movement ...
-
bioRxiv - Cell Biology 2019Quote: ... RT-qPCR was performed on 2 μl of 1/25 diluted cDNA with a CFX-96 (Biorad) thermocycler ...
-
bioRxiv - Immunology 2019Quote: ... IL-2 mRNA amounts were determined with a SYBR Green PCR master mix from Life Technologies (4344463) relative to mRNA for β-2 microglobulin on a DNA Engine Opticon II System (Bio-Rad) using the following oligonucleotides ...
-
bioRxiv - Molecular Biology 2019Quote: ... 0.009% H2O2) for 2 min and images were taken with a ChemiDoc Imaging System fitted (Bio-Rad). Densitometry was performed with Image Lab 5.0 software (Bio-Rad) ...
-
bioRxiv - Genomics 2021Quote: ... RT-PCR amplicons were electrophoresed on 2 % agarose gels and imaged on a ChemiDoc MP (Bio-Rad). The resulting images were analyzed using ImageJ (v1.52a) ...
-
bioRxiv - Immunology 2021Quote: ... 2-ul of cDNA was added to qPCR reaction containing iQ SYBR green master mix (Bio-Rad) and 10-pmol of gene-specific primers ...
-
bioRxiv - Microbiology 2022Quote: ... 400 Ω) was performed in a 2-mm cuvette using the Gene Pulser Xcell Electroporation System (BioRad). After electroporation ...
-
bioRxiv - Cancer Biology 2022Quote: ... and 2 minutes at 72°C using the C1000 Touch Thermal Cycler (Bio-Rad, Los Angeles, CA). Primer sequences are listed in the Supplemental Methods.
-
bioRxiv - Cell Biology 2022Quote: ... The detergent was then removed by four successive additions of Bio-Beads SM-2 Resin (Bio-Rad) over the course of ∼24 h at 4 °C ...
-
bioRxiv - Cell Biology 2022Quote: ... Supernatant was mixed with sample loading buffer supplemented with 1% v/v 2-mercaptoethanol (BioRad, Cat #1610710). Sample was not heated to prevent aggregation of the GPCR ...
-
bioRxiv - Synthetic Biology 2022Quote: ... 2 μL of the diluted samples were used as input in a ddPCR supermix (Bio-Rad, 1863023). Primers and probes ...
-
bioRxiv - Microbiology 2023Quote: ... The relative gene expression was analysed by the comparative 2-ΔΔCt method using CFX 96 software (BioRad). Data were normalized with the endogenous control ...
-
bioRxiv - Biochemistry 2022Quote: ... with integration time set to 2 s and imaged using a Gel Doc XR system (Bio-Rad).
-
bioRxiv - Cell Biology 2023Quote: ... Lysis was performed by directly adding 2x Laemmli sample buffer (supplemented by 2-mercaptoethanol, Bio-Rad Laboratories) at a ratio of 1 µL per 0.1 mg of cell pellets and pipetting up and down ...
-
bioRxiv - Biophysics 2022Quote: ... DDM was removed by addition of a 100-fold excess (w/w) of biobeads SM-2 (Biorad) compared to protein for 4 h at 4 °C under gentle agitation ...
-
bioRxiv - Neuroscience 2023Quote: ... SARS-CoV-2 RT-qPCR reactions (10 µL) using the iTaq Universal Probe One-Step Kit (BioRad) and SARS-CoV-2 N1 primers/probe mix (Stock# 10006713 ...
-
bioRxiv - Cancer Biology 2023Quote: Cells were lysed in sample buffer (2× Laemmli sample buffer, No. 1610737, Bio-Rad, Hercules, California, USA). Whole-cell lysates were subjected to sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE ...
-
bioRxiv - Physiology 2023Quote: ... Captured complexes were dissociated from the beads in the ×2 Laemmli buffer (Bio-Rad Laboratories, Hercules, CA) and analyzed by SDS-PAGE/western blotting using chemiluminescent substrate (ThermoFisher Scientific ...
-
bioRxiv - Cancer Biology 2023Quote: ... Secondary antibody staining was done in 2% milk-TBST (+ 0.01% sodium azide) and detected using ChemiDoc (Biorad).
-
bioRxiv - Neuroscience 2023Quote: ... or anti-rat TCRαβ antibody (2 µg/rat dissolved in saline solution, clone R73, Bio-Rad #MCA453GA) from day 9 to day 14 to deplete DRG T cells as previously described 66 ...
-
bioRxiv - Systems Biology 2024Quote: ... containing 2 μl of cDNA template was prepared and analyzed using CFX Connect Real-Time instrument (BioRad) with the following thermocycling conditions ...
-
bioRxiv - Microbiology 2024Quote: ... 1.5 or 2 % agarose gel solutions (50 mL total volumes) were prepared with agarose powder (Bio-Rad) using 0.5× TBE buffer (45 mM Tris ...
-
bioRxiv - Biochemistry 2024Quote: ... A hydroxyapatite column was prepared by resuspending 2 g Bio-Gel HTP Hydroxyapatite (Bio-Rad, 130-0420) in 12 ml CDC6 HTP-wash buffer ...
-
bioRxiv - Neuroscience 2019Quote: ... were heated at 99 °C for 3 minutes and subjected to 4-20% gradient SDS-PAGE prior to transfer to nitrocellulose membranes (Bio-Rad Laboratories, Inc.). Membranes were then blocked for 1 hour with 5% (w/v ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... for DpnII digested DNA or primers 3 and 4 (table S3) for NlaIII digested DNA on a thermal cycler (Bio-Rad C1000 Touch) with the block settings shown in table 1 ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... for DpnII digested DNA or primers 3 and 4 (table S2) for NlaIII digested DNA on a thermal cycler (Bio-Rad C1000 Touch). PCR amplified samples were purified using the NucleoSpin Gel and PCR cleanup kit (Macherey-Nagel ...
-
bioRxiv - Developmental Biology 2020Quote: ... Membranes were then washed 3 times for 5 min in TBST before detection using Clarity Western ECL Substrate (Bio-rad, 170-5061) and imaging on a ChemiDoc MP (Bio-rad ...
-
bioRxiv - Molecular Biology 2020Quote: ... carried out in glass tubes filled with polyacrylamide gel using a mixture of ampholytes 3/10 and 5/8 (Bio-Rad, USA) overnight at 4 °C ...
-
bioRxiv - Cancer Biology 2019Quote: ... Electrofocusing was performed in glass capillaries with polyacrylamide gel using a mixture of ampholytes 3/10 and 5/8 (#163-1112, #163-1192, Bio-Rad, USA). The second direction is standard SDS 5-10% PAGE followed by staining with Coomassie Brilliant Blue G-250 (#31-4-58-1 ...
-
bioRxiv - Microbiology 2022Quote: ... 300 nM concentration of each primer targeting the viral DNA substrate (5’- AGCGTGGGCGGGAAAATCTC-3’) and the indicated target DNA (table 1) and 1X iTaq Universal SYBR Green Supermix (Bio-Rad Laboratories). The qPCR cycling conditions for quantifying INS activity included an initial incubation at 95°C for 3 minutes ...
-
bioRxiv - Biophysics 2020Quote: ... followed by gel filtration in 50 mM sodium citrate buffer (pH 5.5) and 150 mM sodium chloride using an ENrich SEC 650 size-exclusion chromatography column (Bio-Rad). Purified samples were concentrated using Amicon Ultracel-10K centrifugal filter units (EMD Millipore).
-
bioRxiv - Biochemistry 2023Quote: ... and exchanged into 100 mM sodium phosphate buffer (pH 7.0) supplemented with 100 mM sodium chloride using Econo-Pac 10DG desalting pre-packed gravity-flow columns (Bio-Rad). Proteins used for crystallization were further purified by gel filtration in 50 mM sodium citrate buffer (pH 5.5 ...
-
bioRxiv - Biochemistry 2023Quote: ... Proteins used for crystallization were further purified by gel filtration in 50 mM sodium citrate buffer (pH 5.5) and 150 mM sodium chloride using an ENrich SEC 650 size-exclusion chromatography column (Bio-Rad). Purified samples were concentrated using Amicon Ultracel-3K centrifugal filter units (EMD Millipore ...
-
bioRxiv - Microbiology 2020Quote: ... One or two micrograms of the concentrated viruses were heated at 95 °C for 5 min before being resolved on 4-20% SDS-PAGE (Bio-Rad) using the Novex™ Sharp Pre-stained Protein Standard (ThermoFisher Scientific ...
-
bioRxiv - Immunology 2021Quote: ... They were incubated at the room temperature for 5-10 min and they were placed inside a 4-mm cuvette (Bio-Rad). The cuvettes were pulsed using the BTX electroporator (300 V ...
-
bioRxiv - Microbiology 2019Quote: ... Samples were boiled for 5 minutes at 95°C before separation on a gradient 4-20% SDS-PAGE gel (Bio-Rad). Samples were then transferred to nitrocellulose membrane using standard methods for semi-dry transfer (Bio-Rad) ...
-
bioRxiv - Biochemistry 2022Quote: ... and heated to 100 °C for 5 min and resolved on 4-20% (w/v) gradient SDS-PAGE gels (Bio-Rad) with Tris-glycine buffer ...
-
bioRxiv - Cell Biology 2020Quote: ... lysates were cleared by centrifugation at 16000xg for 5 min at 4°C and the total protein concentration in the lysates was measured by Bradford protein assay (Bio-Rad). For western blot analysis 25 µg of each lysate was boiled for 5 min at 98°C (for the detection of LC3B and ATG9A samples were heated at 60°C for 10 min ...
-
bioRxiv - Neuroscience 2019Quote: ... Equal amounts of protein per sample (5 or 10ug) was loaded into a 4-20% gradient precast mini-PROTEAN TGX gel (Bio-Rad) and proteins were separated with 200V in 1x running buffer (24.76 mM Tris base ...
-
bioRxiv - Developmental Biology 2020Quote: ... excess antibody subsequently removed by a further 4 washes in TBSTw for 5 minutes before detection with ECL Western blotting reagent (Bio-Rad) following manufacturer’s instructions ...
-
bioRxiv - Neuroscience 2021Quote: ... 50 μg of neuronal lysate and corresponding mHTTex1 seed were boiled for 5 min with sample loading buffer and loaded into a 4-20 % polyacrylamide gel (SDS-PAGE, Criterion Bio-Rad) to detect monomeric endogenous HTT or by semi-denaturing detergent agarose (1.5% ...
-
bioRxiv - Microbiology 2020Quote: ... and boiled for 5 min prior to loading on 4-20% SDS-PAGE gradient gels (Mini-PROTEAN TGX precast gels; Bio-Rad). Precision Plus Protein Unstained Protein Standards (Bio-Rad ...
-
bioRxiv - Physiology 2021Quote: ... Protein aliquots were denatured in Laemmli sample buffer at 100°C for 5 min and then loaded (10– 15 μg protein per lane) on 4–20% Criterion TGX Stain-free gels (Bio-Rad) and run for 45 min at 200 V ...
-
bioRxiv - Cell Biology 2021Quote: ... Samples were boiled for 5 min and the proteins were separated in 4-20% Mini-PROTEAN TGX Precast Protein Gel (Bio-RAD) and electroblotted to nitrocellulose membrane ...
-
bioRxiv - Biochemistry 2022Quote: ... cell density was between 4-5 × 106 cells/mL with >95% viability as determined using a TC20 automated cell counter (Bio-Rad). Cells were diluted with warm Expi293 Expression Media to 2 × 106 cells/mL in 42.5 mL ...
-
bioRxiv - Cell Biology 2022Quote: ... Membranes were incubated with primary and HRP-secondary antibodies in TBST buffer with 5% milk (RT for 1 hour or overnight at 4 °C) and revealed with an ECL solution (BIO-Rad) following manufacturer’s instructions.
-
bioRxiv - Cancer Biology 2022Quote: ... Samples were incubated at 95 °C for 5 minutes prior to being resolved on a 4 – 15% Mini-PROTEAN TGX Precast Protein Gels (Bio-rad) and transferred onto a methanol activated Immobilon-P PVDF membrane (Millipore ...
-
bioRxiv - Biochemistry 2022Quote: ... heated at 95 °C for 5 min and resolved on a 4–12% Criterion XT Bis-Tris Protein Gel (Cat. No. 3450125, Bio-Rad). Proteins on the gel were transferred to the PVDF membrane ...