Labshake search
Citations for Microchem :
151 - 200 of 224 citations for 8 Fluoroisoquinoline since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2021Quote: ... master molds were made by spin-coating SU-8 2005 resin (MicroChem Corp., USA) on silicon wafers using a spincoater (Laurell Technologies ...
-
bioRxiv - Biophysics 2023Quote: ... created using ultraviolet (UV) photoresist lithography with SU-8 negative resist (SU8 3010, Microchem). The resists were then cured using UV light exposure through photomasks designed in CAD software and printed by CAD/Art Services ...
-
bioRxiv - Genomics 2023Quote: ... A layer (∼30 μm in thickness) of SU-8 2025 photoresist (MicroChem, Y111069 0500L1GL) was coated on a 3-inch silicon wafer (University Wafer ...
-
bioRxiv - Bioengineering 2023Quote: ... Mold for layer #4 is fabricated using SU-8 2025 (MicroChem, Newton, MA, USA) spin-coated at 4000rpm for 30s to create ∼20μm tall channels (Figure S2b) ...
-
bioRxiv - Genomics 2020Quote: ... The features on the photomask were transferred to a negative photoresist (MicroChem, SU-8 2025) on a silicon wafer (University Wafer ...
-
bioRxiv - Bioengineering 2022Quote: ... After baking and developing with SU-8 developer (propylene glycol methyl ether acetate; MicroChem Corp.), the 10-μm tall positive master of the drop-maker and the 25-μm tall positive master of the sorter are formed on the silicon wafers ...
-
bioRxiv - Bioengineering 2022Quote: ... After baking and development with SU-8 developer (propylene glycol methyl ether acetate; MicroChem Corp.), the 15 μm and 25 μm tall positive masters of the devices were formed on the silicon wafers ...
-
bioRxiv - Bioengineering 2022Quote: ... After baking and development with SU-8 developer (propylene glycol methyl ether acetate; MicroChem Corp.), a 10-μm tall positive master of the device was formed on the silicon wafer ...
-
bioRxiv - Biophysics 2019Quote: ... hexamethyldisilazane (HMDS) was used as a adhesion promoter (MicroChem Corp. SU-8 2000 Processing Guidelines). It was applied by placing dehydrated glass substrates in a desiccator connected to a diaphragm pump and containing a vial of HMDS (Product Number ...
-
bioRxiv - Biochemistry 2021Quote: ... Undeveloped photoresist is washed off with SU-8 developer (1-methoxy-2-propanol acetate, MicroChem).
-
bioRxiv - Plant Biology 2021Quote: ... the silicon wafer was spin-coated with SU-8 3050 (MicroChem Corp., Newton, MA, USA) at 1750 rpm for 60 s and baked at 95°C for 30 min ...
-
bioRxiv - Cell Biology 2019Quote: ... followed by a spin coating step using SU-8 2005 (3000 RPM, 30sec, Microchem, USA) and a prebake of 2 min at 95°C ...
-
bioRxiv - Biophysics 2020Quote: ... the MVAS-Force consists of three layers fabricated through mold replication from SU-8 (Microchem) masters made with standard photolithographic methods on polished silicon wafers (Universitywafers.com) ...
-
bioRxiv - Animal Behavior and Cognition 2023Quote: ... molds were made using negative UV photoresist (SU-8 2025, Kayaku Advanced Materials, [formerly Microchem]) spun coat onto silicon wafers (10 s at 500 rpm ...
-
bioRxiv - Cancer Biology 2023Quote: ... After patterning the design on a silicon wafer using photolithography with SU-8 photoresist (MicroChem), PDMS (Sylgard 184 ...
-
bioRxiv - Cell Biology 2019Quote: ... Control molds were fabricated on 4” silicon wafers by spin coating SU-8 2025/3025 (MicroChem) at 500 rpm for 5 sec followed by 3000 rpm for 70 sec yielding a substrate height of around 15-18 μm ...
-
bioRxiv - Cancer Biology 2021Quote: ... The design was patterned on a silicon wafer by photolithography with SU-8 (2050) photoresist (MicroChem). PDMS devices were then fabricated by pouring PDMS (Sylgard 184 ...
-
bioRxiv - Cell Biology 2023Quote: ... dried using a nitrogen gas and used immediately for SU-8 2000 (Kayaku Advanced Materials, MicroChem) spin coating ...
-
bioRxiv - Bioengineering 2023Quote: ... Negative master molds were made with Nano SU-8-100 photoresist (Microchem, Round Rock, TX, USA) on 3 silicon wafers (University Wafer Inc. ...
-
bioRxiv - Bioengineering 2023Quote: ... The PDMS casting mold was fabricated by photolithography patterning of 50 μm SU-8 resist (Microchem 3025 ...
-
bioRxiv - Bioengineering 2019Quote: ... This photomask was subsequently used to pattern an SU-8-coated silicon wafer (Microchem Corporation, Westborough, USA) using conventional photolithography ...
-
bioRxiv - Genomics 2021Quote: ... We followed the manufacturer’s guidelines to spin coat SU-8 negative photoresist (SU-2010, SU-2025, Microchem) on a silicon wafer (C04004 ...
-
bioRxiv - Bioengineering 2020Quote: Standard soft lithography techniques67 were used to fabricate an SU-8 (Kayaku Advanced Materials, formerly Microchem Corp.) master mold for sets of four microfluidic funnels for worm confinement as described53 ...
-
bioRxiv - Cell Biology 2021Quote: ... The master molds were made using standard soft-photolithography processes using SU-8 2025 photoresist (Microchem, USA). The designs were made on AutoCAD (available upon request ...
-
bioRxiv - Microbiology 2022Quote: ... A silicon mold of HIC was fabricated using the negative photoresist SU–8 (MicroChem Corp., Westborough, MA) by photolithography (22) ...
-
bioRxiv - Biophysics 2021Quote: Substrates for EBL were prepared directly after HMDS treatment by spin coating SU-8 2001 (Microchem Corp.) to a desired thickness of 500 nm and 1000 nm ...
-
bioRxiv - Genomics 2019Quote: ... and then microfluidic channel features were patterned with a 100 µm layer of SU-8 3050 (Microchem). Each chip was then capped with cured PDMS with holes cored for all inlet and outlet ports ...
-
bioRxiv - Bioengineering 2019Quote: ... This photomask was then utilized to pattern a SU-8 coated silicon wafer (Microchem Corporation, Westborough, USA). The final master structure consisted of an inverted straight rectangular microchannel (width ...
-
bioRxiv - Neuroscience 2023Quote: ... Silicon-wafer masters were created by exposing a layer of SU-8 2025 resist (Microchem, Newton, MA) through a transparency mask and developing the master in a bath of glycol monomethyl ether acetate (PGMEA) ...
-
bioRxiv - Bioengineering 2023Quote: ... the wafer underwent a post-exposure bake and was developed in a SU-8 developer solution (MicroChem). The baking durations and exposure dosage followed the manufacturer’s instructions ...
-
bioRxiv - Animal Behavior and Cognition 2023Quote: ... first a positive mold was created by photolithography of a layer of photoresist (SU-8 2008, Microchem) on a 4 inch silicon wafer [50] ...
-
bioRxiv - Bioengineering 2021Quote: ... a negative-relief master was lithographically fabricated onto a polished silicon substrate using SU-8 epoxy photoresist (MicroChem) (SU-8 3025 for MCF-10A devices ...
-
bioRxiv - Microbiology 2020Quote: ... The mixture was casted onto a silicon wafer having different patterns of SU-8 2100 (MicroChem, MA, USA) and AZ-50 (AZ Electronic Materials ...
-
bioRxiv - Bioengineering 2023Quote: ... and O2 plasma treated (Harrick Plasma) for 2 min prior to coating with SU-8 photoresist (MicroChem, Kayaku) using a spin-coater ...
-
bioRxiv - Systems Biology 2019Quote: Photoresist masters of 25 µm layer height were fabricated by spinning a layer of photoresist SU-8 3025 (Microchem) onto a silicon wafer (University Wafer) ...
-
bioRxiv - Cell Biology 2021Quote: ... a post-exposure bake identical to the soft bake was performed before development using SU-8 developer (Microchem, USA).
-
bioRxiv - Biophysics 2020Quote: ... devices for droplet generation and multilayer well-devices for droplet collection and imaging were produced on SU-8 (Microchem) moulds fabricated via photolithographic processes as described previously83–85.
-
bioRxiv - Biophysics 2022Quote: ... devices for droplet generation and multilayer well-devices for droplet collection and imaging were produced on SU-8 (Microchem) moulds fabricated via photolithographic processes as described previously.57–59 Further details are provided in the Supporting Information.
-
bioRxiv - Plant Biology 2019Quote: ... device was prepared by spin-coating negative photoresist (SU-8 3005 for 4.5 and 8.5 µm deep device, 3010 for 15 µm deep device; Microchem Corp.) on a silicon wafer ...
-
bioRxiv - Microbiology 2020Quote: ... The master molds were fabricated in a cleanroom environment through a two-step photolithography procedure of SU-8 (Microchem) on silicon wafers ...
-
bioRxiv - Systems Biology 2020Quote: ... the silicon wafer was baked for 10 min at 200°C and spin coated at 4000 rpm using SU-8 2000.5 (MicroChem) to generate 0.5 μm height ...
-
bioRxiv - Immunology 2021Quote: ... a master negative mold was prepared by spin-coating a silicon wafer with negative photoresist (SU-8, Microchem, MA) to a thickness of 100 μm ...
-
bioRxiv - Cell Biology 2022Quote: ... a post-exposure baking identical to the soft bake was performed before development with SU-8 developer (Microchem, USA). Then ...
-
bioRxiv - Microbiology 2023Quote: ... Molds were made on 100 mm silicon wafers (University Wafer) and spin coated with SU-8 3050 photoresist (MicroChem). Polydimethylsiloxane (PDMS ...
-
bioRxiv - Genomics 2023Quote: ... The wafer was baked at 95 °C for 7 min and then rinsed with SU-8 developer (MicroChem, Y0201004000L1PE). The wafer was finally washed with isopropanol ...
-
bioRxiv - Bioengineering 2023Quote: Molds for layer #3 and layer #5 (Figure S1d) are fabricated using SU-8 2075 (MicroChem, Newton, MA, USA) spin-coated at 2150rpm for 30s to create ∼100μm tall patterns (Figure S2a ...
-
bioRxiv - Systems Biology 2019Quote: ... master mold for the Dropseq device design (CAD file available as a download from: http://mccarrolllab.org/dropseq/) was fabricated from a SU-8 photoresist (MicroChem, USA), and spin-coated on a 3” silicon wafer to generate 125 μm-thick uniform layers ...
-
bioRxiv - Systems Biology 2019Quote: ... The master was subjected to post-exposure bake at 95°C for 4 min and developed in fresh SU-8 developer (Microchem) for 6 min ...
-
bioRxiv - Bioengineering 2020Quote: ... Negative master molds were fabricated on 3-in diameter silicon wafers (University Wafer ID: 447) using UV crosslinked Nano SU-8-100 photoresist (Microchem) patterned with photomasks printed on high-resolution transparent plastic film (CAD/Art Inc.) ...
-
bioRxiv - Bioengineering 2020Quote: ... post-baked (65 °C and 95 °C for 1 min and 4 min, respectively) and developed in SU-8 developer (MicroChem). The SU-8 was hard-baked at 180 °C for 1 hour after development ...