Labshake search
Citations for Microchem :
201 - 224 of 224 citations for 8 Bromoguanosine hydrate since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Bioengineering 2021Quote: ... stamps for 250u and 500u diameter circles were prepared by polymerization upon a patterned master of photoresist (SU-8, MicroChem) created using UV photolithography using a laser printed mask ...
-
bioRxiv - Cancer Biology 2021Quote: ... The conventional soft-lithography process was used to replicate the microchannel-patterned PDMS with SU-8 photoresist pattern master as a master mold (MicroChem). The PDMS elastomer ...
-
bioRxiv - Synthetic Biology 2019Quote: Master moulds of 13μm height were produced on a 4 inch silicone wafer (University Wafer) using SU-8 3010 (Microchem corp.) according to the manufacturer’s data sheet and developed in PGMEA ...
-
bioRxiv - Bioengineering 2019Quote: ... at a ratio of 10:1 base to curing agent was cast against a mold composed of SU-8 2150 (MicroChem) patterns formed on a silicon wafer ...
-
bioRxiv - Synthetic Biology 2020Quote: ... using reactive ion etching to define 3.1 µm deep chambers arrayed along a 100 µm wide by 22 µm deep channel defined by SU-8 photoresist (MicroChem). After treating with a silane release layer ...
-
bioRxiv - Bioengineering 2021Quote: ... The master molds were fabricated using SU-8 3050 photoresist spun to 124 – 136 μm thickness (Microchem, Westborough MA, USA) on 3” silicon wafers (University Wafer ...
-
bioRxiv - Bioengineering 2019Quote: ... master mold wafers for casting the control and flow layers of the PDMS devices were prepared by multilayer photolithography using AZ50 XT (Capitol Scientific) and SU-8 (Microchem) photoresists according to the manufacturer’s specification ...
-
bioRxiv - Neuroscience 2022Quote: ... The wafer was inserted in the spin coater (WS-650-23NPP, Laurell) to deposit one layer of SU-8 2050 negative photoresist (Microchem) to obtain a thickness of 35 μm ...
-
bioRxiv - Cell Biology 2022Quote: ... A master mold was made by standard soft photolithography processes by spin-coating a 25μm layer of SU-8 2025 (Microchem, USA) photoresist at 2700 rpm for 30sec on a 3” wafer (Neyco ...
-
bioRxiv - Systems Biology 2019Quote: ... The master mold was made with a 3” silicon wafer with a two-level micro-relief (0.8 μm and 15 μm) of a UV-curable epoxy (SU-8 by MicroChem, Newton, MA). The first level was made with SU-8 2002 spun onto the silicon wafer at an initial 500 rpm for 10 seconds with an acceleration index of 1 ...
-
bioRxiv - Bioengineering 2023Quote: ... PDMS mixture (10:1 elastomer base to curing agent, w/w) was degassed and poured onto SU-8 (MicroChem, MA, USA) patterned wafer and cured at 80°C for 1 h ...
-
bioRxiv - Synthetic Biology 2023Quote: ... was spin-coated onto silicon wafers and patterned by UV exposure through a photolithography mask and subsequent development (SU-8 developer; MicroChem Corp.). From the photoresist masters ...
-
bioRxiv - Cell Biology 2024Quote: A 4-inch silicon wafer (UniversityWafer, Inc., US) was first coated with an 80 µm-thick layer of photoresist (SU-8 2025, MicroChem, US) using a spin coater (spinNXG-P1 ...
-
bioRxiv - Biophysics 2019Quote: ... A master mold of the structures of the microfluidic chip was produced by spin coating a thin layer of SU-8 2025 (MicroChem, Newton, MA) on a 4-inch silicon wafer (University Wafer ...
-
bioRxiv - Bioengineering 2021Quote: ... by UV (365nm with 11.1mW/cm2) exposure (UV-KUB 2, KLOE, France) of a 75 μm thick layer of SU-8 2075 photoresist (MicroChem Corporation, USA) for 20s ...
-
bioRxiv - Cell Biology 2021Quote: ... The master wafer was prepared by sequentially spin-coating the wafer with two layers of SU-8 negative photoresist (Microchem, Newton, MA) and patterning by exposure to UV light through the two chrome masks ...
-
bioRxiv - Bioengineering 2019Quote: ... 70-μm) with micro-wells in it was fabricated on a silicon wafer using a negative photoresist (SU-8 3050, MicroChem, MA, USA), through the techniques of photolithography ...
-
bioRxiv - Biophysics 2023Quote: ... A positive master mould containing microstructures of twelve-cornered stars of different widths (1000 and 2000µm) and corner angles (30°, 60°, 90° and 120°) were fabricated via photolithography using SU-8 2050 (MicroChem, Newton, MA, USA). The height of all the star structures was 100µm ...
-
bioRxiv - Cell Biology 2023Quote: ... Silicon wafers were preheated at 180 °C for 30 min and overlayed with a 45 μm thick layer of SU-8-25 photoresist (Microchem, Newton, MA)by spin coating at 1300 rpm ...
-
bioRxiv - Plant Biology 2023Quote: ... A silicon wafer was used to fabricate 20-µm-thick negative masters with an ultrathick SU-8 3010 photoresist (Y301186, MicroChem, Westborough, USA) for PDMS micro-flow channels molding ...
-
bioRxiv - Genomics 2020Quote: ... Photomasks designed by AutoCAD were printed on transparencies and the features on the photomask transferred to a silicon wafer (University Wafer) using negative photoresist (MicroChem, SU-8 2025) by UV photolithography ...
-
bioRxiv - Molecular Biology 2019Quote: ... one for the aqueous sample) flow-focusing microfluidic mold was prepared with standard soft lithography techniques using SU-8 photoresist (MicroChem Corp., MA, USA) patterned on a 4-inch silicon wafer ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... The chip mould with a uniform height of 23.5μm was obtained by spin-coating a silicon wafer (4 inches; Siltronix, France) with a negative photoresist (SU-8 2035, MicroChem Corp., Newton, MA, USA) according to manufacturer’s instructions ...
-
bioRxiv - Cell Biology 2023Quote: ... and placed in a clean room on top of 76.2 mm silicon wafers (University Wafer, 447) to produce by photolithography 60 µm depth molds using SU-8 2050 photoresist (Microchem, now Kayaku Advanced Materials, Inc.). A 10:1 mixture of Sylgard 184 elastomer Polydimethylsiloxane (PDMS ...