Labshake search
Citations for Quantifoil Micro Tools :
1 - 50 of 369 citations for Laemmli Sample Buffer 2X Solution since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2022Quote: ... 2–3 μL of sample solution was applied to a holey carbon grid (Quantifoil R2/1 ...
-
bioRxiv - Microbiology 2023Quote: A 1.4 μl sample solution was applied onto a glow-discharged holey carbon grid (Quantifoil R1.2/1.3 Mo grid ...
-
bioRxiv - Biophysics 2024Quote: ... to produce a fiducial marker along with 0.01% NP-40 and 10 μM tubulin solution with BRB80 buffer and 1 mM GTP before the solution was dropped onto the grids (QUANTIFOIL R 1.2/1.3 Cu 200). The grids were blotted with vitrobot (Thermo Fisher Scientific ...
-
bioRxiv - Plant Biology 2022Quote: ... 2 μL of sample solution was applied onto a holey carbon grid (Quantifoil R2/1, Cu 300 mesh) covered with a thin amorphous carbon film ...
-
bioRxiv - Molecular Biology 2020Quote: A 3 μL sample solution was applied to a Quantifoil holey carbon grid R1.2/1.3 Mo 200 mesh (Quantifoil Micro Tools GmbH ...
-
bioRxiv - Molecular Biology 2020Quote: ... An aliquot of sample solution was applied to standard molybdenum Quantifoil grids R1.2/1.3 (Quantifoil Micro Tools GmbH) and vitrified by rapid plunging in liquefied ethane using a Vitrobot Mark IV (Thermo Fisher Scientific ...
-
bioRxiv - Physiology 2023Quote: ... Sample solution (~ 3 μl) was applied on freshly glow discharge TEM grids (Quantifoil R2/1, Cu, mesh 200) and plunge-frozen in liquid ethane using Vitrobot Mark IV (Thermo Fisher Scientific) ...
-
bioRxiv - Biochemistry 2024Quote: ... 3.2 μl samples of the solution were applied onto EM grids (Quantifoil, R 1.2/1.3 Cu 300 mesh) that had been glow discharged with PELCO easiGlow for 60 seconds in Vitrobot Mark IV chamber at 4°C and 90% humidity ...
-
bioRxiv - Microbiology 2023Quote: A 3.0 μl sample solution containing 10 nm colloidal gold was applied onto a glow-discharged holey carbon grid (Quantifoil R1.2/1.3 Cu grid ...
-
bioRxiv - Microbiology 2021Quote: ... 3 μL of sample solution was applied to a Quantifoil holey carbon grid (R1.2/1.3, Mo 200 mesh, Quantifoil Micro Tools GmbH) at 4 °C with 100% humidity ...
-
bioRxiv - Microbiology 2023Quote: A 1.4 μl sample solution was applied onto a glow-discharged holey carbon grid (Quantifoil R1.2/1.3 Mo grid, Quantifoil Micro Tools, Germany), and the grid was plunge-frozen into liquid ethane by Vitrobot mark IV (Thermo Fisher Science ...
-
bioRxiv - Biophysics 2024Quote: Approximately 3□μL of the sample solution were put on newly glow-discharged TEM grids (Quantifoil R2/1, Cu, mesh 200) and plunge-frozen in liquid ethane using the Vitrobot Mark IV (Thermo Fisher Scientific) ...
-
bioRxiv - Immunology 2024Quote: ... at 0.7 mg/mL was mixed with 0.5 µL of 0.035 mM lauryl maltose neopentyl glycol (LMNG) solution immediately before sample deposition onto an UltrAuFoil 1.2/1.3 (Au, 300-mesh; Quantifoil Micro Tools GmbH) grid that had been plasma cleaned for 25 seconds using a PELCO easiGlow™ Glow Discharge Cleaning System (Ted Pella Inc.) ...
-
bioRxiv - Biophysics 2024Quote: A 3 µl aliquot of sample solution was applied to a glow discharge QUANTIFOIL R1.2/1.3 Au 300 mesh grid (Quantifoil Micro Tools GmbH) on a Vitrobot Mark IV (Thermo Fisher Scientific) ...
-
PSGL-1 inhibits HIV-1 infection by restricting actin dynamics and sequestering HIV envelope proteinsbioRxiv - Microbiology 2020Quote: ... A 3.5 µL virus sample solution was applied onto a glow discharged copper grid coated with holey carbon (R2/1; Quantifoil, Jena, Germany) prior to plunge-freezing ...
-
bioRxiv - Immunology 2022Quote: ... detergent at a final concentration of 0.005 mM was added to each sample and 3 µl of that solution was immediately loaded onto plasma-cleaned QuantiFoil R 2/1 (400-mesh; Quantifoil Micro Tools GmbH) and UltrAuFoil R 1.2/1.3 grids (300-mesh ...
-
bioRxiv - Molecular Biology 2022Quote: ... 2–3 μL of sample solution was applied to a holey carbon grid (Quantifoil R2/1, Mo 300 mesh; Quantifoil Micro Tools GmbH) covered with a thin amorphous carbon film at 4 °C with 100% humidity ...
-
bioRxiv - Molecular Biology 2022Quote: ... The pellet was then resuspended in warm EM buffer and 3 μL of this sample was applied to a carbon on gold grid (Quantifoil R2/2 Au 200 mesh), recently glow-discharged for 1 min at 30 mA ...
-
bioRxiv - Molecular Biology 2022Quote: ... The no carbon sample (Quantifoil Cu200 R2/1) was blotted for 1.5 s from the back side right after sample application and immediately plunge frozen in liquid ethane ...
-
Structure of the Human Signal Peptidase Complex Reveals the Determinants for Signal Peptide CleavagebioRxiv - Biochemistry 2020Quote: ... 3 µL samples were applied to freshly glow-discharged Cu 200 Holey Carbon R1.2/1.3 grids (Quantifoil, for samples without FFosC), or Cu 200 Holey Carbon R2/1 grids (Quantifoil ...
-
bioRxiv - Bioengineering 2023Quote: ... 3.0 µl aliquots at a concentration of 0.87 or 1.0 mg/ml of the spikeD614G-binder sample or the spikeOmicron-binder sample were applied onto glow-discharged carbon-coated copper grids (Quantifoil R2/1, 400 mesh), blotted for 4.0-8.0 s ...
-
bioRxiv - Biochemistry 2020Quote: Samples were prepared on UltrAuFoil 1.2/1.3 gold grids (Quantifoil). Grids were initially washed with 2 drops of chloroform and allowed to air dry ...
-
bioRxiv - Biophysics 2023Quote: ... the sample was applied to holey carbon-film grids (Quantifoil, Germany ...
-
bioRxiv - Plant Biology 2024Quote: ... 2.5 μL of solution was applied to R1.2/1.3 Cu 400-mesh grids (Quantifoil, Germany) that had been glow-discharged for 60 seconds with a current of 15 mA in a PELCO easiGlow system ...
-
bioRxiv - Cell Biology 2021Quote: ... Samples were applied to glow-discharged holey carbon film grids (Quantifoil) and plunge frozen into liquid ethane using a Vitrobot (ThermoFisher) ...
-
bioRxiv - Molecular Biology 2022Quote: ... The plus carbon sample (Quantifoil Cu300 R2/1 + 2 nm C) was blotted for 2 s with blot force +3 after a 30 s wait time after sample application and immediately plunge frozen in liquid ethane ...
-
bioRxiv - Immunology 2024Quote: ... The sample was prepared on Quantifoil Cu 300 2/2 (Quantifoil) grids and was frozen in liquid ethane using the Vitroblot Mark IV (Thermo Fisher ...
-
bioRxiv - Molecular Biology 2024Quote: ... For the IPO9:AKIRIN2 sample open-hole R1.2/1.3 grids (Quantifoil) with 200 mesh ...
-
bioRxiv - Biochemistry 2024Quote: Samples were frozen on UltraAuFoil R1.2/1.3 300 mesh grids (Quantifoil) using a Vitrobot Mark IV (ThermoFisher Scientific) ...
-
bioRxiv - Biophysics 2024Quote: ... 3 µl of the solution was then added to a glow- discharged ultrafoil gold grid (Quantifoil 2/2 ...
-
bioRxiv - Biochemistry 2022Quote: Cryo samples were prepared on UltrAuFoil R1.2/1.3 300 mesh grids (Quantifoil), which were rendered hydrophilic through plasma cleaning for 1 min (Tedpella “Easy glow” discharge system ...
-
bioRxiv - Molecular Biology 2023Quote: Samples were prepared by glow discharging 1.2/1.3 300 mesh UltrAuFoil (QuantiFoil Micro Tools GmbH ...
-
bioRxiv - Microbiology 2024Quote: ... 4 µl sample was applied onto Au R2/2 200 mesh (Quantifoil) grids ...
-
bioRxiv - Biochemistry 2021Quote: Three microliters of the h20S-PA26E102A-Opt5 solution were applied to R2/2 400-mesh grids (Quantifoil) that had been plasma treated for 25 s using a glow discharger (Electron Microscopy Sciences ...
-
bioRxiv - Biochemistry 2022Quote: ... Solutions were adjusted to OD600≈10 and applied to carbon-coated holey copper grids (Quantifoil R2/1). Grids were glow-discharged for 30 s in oxygen/argon atmosphere of a plasma cleaner (Gatan Solarus 950 ...
-
bioRxiv - Plant Biology 2021Quote: Concentrated PSII solution (3 µl) was applied on glow-discharged holey carbon grids (Cu Quantifoil R1.2/1.3) that were vitrified for cryo-EM structural determination using a Vitrobot FEI (3 s blot at 4°C and 100% humidity) ...
-
bioRxiv - Molecular Biology 2023Quote: ... Samples were deposited on an Ultra Au foil R 1.2/1.3 grid (Quantifoil) that was plasma-cleaned for 1.5 min (Gatan Solarus 950) ...
-
bioRxiv - Biochemistry 2024Quote: ... The sample was applied to Holey carbon grids (3.5/1, 400 mesh, Quantifoil) at 4 °C ...
-
bioRxiv - Biochemistry 2024Quote: Samples (3 μl) were applied onto a glow-discharged UltrAuFoil grid (Quantifoil GmbH) and were flash frozen in liquid ethane using the Vitrobot mark IV (Thermo Fisher Scientific ...
-
bioRxiv - Biochemistry 2022Quote: Samples (3 μl) were applied onto a glow-discharged UltrAuFoil grid (Quantifoil GmbH) and were flash-frozen in liquid ethane using the Vitrobot mark IV (Thermo Fisher Scientific ...
-
bioRxiv - Immunology 2022Quote: ... 3.5 μl of each sample was applied to 1.2/1.3 UltrAuFoil grids (Quantifoil) which had been glow-discharged for 1 min at 15 mA in an EasiGlow (Pelco) ...
-
bioRxiv - Synthetic Biology 2023Quote: 4 µl of sample was adsorbed onto holey carbon-coated grid (Quantifoil, Germany) that was glow-discharged ...
-
bioRxiv - Neuroscience 2024Quote: ... The sEV samples were frozen on TEM grids (Quantifoil R2,2 300 mesh, EMS) that were charged for 30 seconds with a Pelco EasiGlow glow discharge cleaning system (Ted Pella) ...
-
bioRxiv - Biophysics 2024Quote: ... Samples were applied on holey carbon grids (Quantifoil R1.2/1.3, 300 mesh copper) that were previously glow-discharged using a PELCO easiGlow glow discharge apparatus for 60 s at 30 mA (Ted Pella) ...
-
bioRxiv - Biophysics 2020Quote: ... Aliquots (3.5 μl) of protein solution were loaded onto glow-discharged holey carbon grids (Quantifoil Au R1.2/1.3), which were blotted for 3.5 s and immersed in liquid ethane cooled by liquid nitrogen using Vitrobot (Mark IV ...
-
bioRxiv - Biophysics 2020Quote: 0.8 mg/mL aldolase solution was applied to glow-discharged gold holey carbon 1.2/1.3 200 mesh grids (Quantifoil). Grids were blotted for 3 seconds at 0 force and vitrified in liquid ethane using a MarkIV Vitrobot (ThermoFisher) ...
-
bioRxiv - Molecular Biology 2023Quote: ... 1.5 µL of fibril solution was applied to freshly glow-discharged R2/1 holey carbon film grids (Quantifoil). After the grids were blotted for 12 seconds at a blot force of 10 ...
-
bioRxiv - Biophysics 2022Quote: ... A total of 3 µl of the solution was applied to freshly glow discharged R2.2 Cu300 grids (Quantifoil), blotted from the back side for 1.2s at 20°C and 99% humidity and immediately plunge frozen in liquid ethane using a Leica EM GP ...
-
bioRxiv - Immunology 2024Quote: ... Protein solutions were applied to glow-discharged grids (CF - Protochips Inc.; ANTcryo – Single Particle, LLC; Quantifoil, SPT Labtech), blotted ...
-
bioRxiv - Biophysics 2024Quote: ... 10 mM DTT was incubated for 3 days at 30 °C and 2.5 μL of the solution was applied onto a Quantifoil R 1.2/1.3 200 mesh Cu grid (Quantifoil) and plunge-frozen in liquid ethane by a Vitrobot Mark IV (FEI) ...