Labshake search
Citations for Millipore Sigma :
1 - 50 of 708 citations for Diethylene Glycol Divinyl Ether stabilized with KOH since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biophysics 2020Quote: ... Propylene glycol methyl ether acetate (PGMEA) (Sigma-Aldrich, 537543) was then used to remove the unexposed SU8 from the wafer ...
-
bioRxiv - Bioengineering 2020Quote: ... developed in propylene glycol monomethyl ether acetate (48443, Sigma-Aldrich) for 2 min ...
-
bioRxiv - Bioengineering 2020Quote: ... developed in propylene glycol monomethyl ether acetate (48443, Sigma-Aldrich) for 2 min ...
-
bioRxiv - Bioengineering 2021Quote: ... Melted poly (ethylene glycol) dimethyl ether (PEGDM) (Sigma Aldrich, Cat# 445908) was then injected into the channels and allowed to fill at 70 °C for 1 hour ...
-
bioRxiv - Developmental Biology 2022Quote: ... the wafer was developed with propylene glycol monomethyl ether acetate (Sigma) and baked at 135 °C for 4 h ...
-
bioRxiv - Biophysics 2020Quote: ... After development (with Propylene glycol monomethyl ether acetate −PGMEA 484431, Sigma), the resin that had not been insulated was removed and the wafer was baked on a hot plate to allow proper adhesion of the resin onto the substrate ...
-
bioRxiv - Bioengineering 2022Quote: ... then immersed in propylene glycol methyl ether acetate (PGMEA, Sigma Aldrich, 484431) for 5 minutes to dissolve un-crosslinked photoresist ...
-
bioRxiv - Molecular Biology 2021Quote: ... Lipids were solubilized with 1.2% (v/v) pentaethylene glycol monodecyl ether (Sigma) and freshly purified protein was added at a lipid-to-protein ratio of 250:1 (w/w) ...
-
bioRxiv - Neuroscience 2022Quote: ... the wafer was developed using propylene glycol monomethyl ether acetate (Sigma-Aldrich) for 17 minutes.
-
bioRxiv - Neuroscience 2022Quote: ... the wafer was developed using propylene glycol monomethyl ether acetate (Sigma-Aldrich) for 5 minutes ...
-
bioRxiv - Biophysics 2022Quote: ... the master was developed in propylene glycol methyl ether acetate (Sigma-Aldrich) to remove any photoresist which had not cross-linked.
-
bioRxiv - Biophysics 2023Quote: ... the master was developed in propylene glycol methyl ether acetate (Sigma-Aldrich) to remove any photoresist which had not cross-linked ...
-
bioRxiv - Biophysics 2023Quote: ... the master was developed in propylene glycol methyl ether acetate (Sigma-Aldrich) to remove any photoresist which had not cross-linked.
-
bioRxiv - Biophysics 2021Quote: ... The wafer was developed using Propylene-glycol-monomethyl-ether-acetate (PGMEA) (Sigma-Aldrich) and subsequently given a second exposure with UV light for 30 seconds to make structures mechanically stable on the wafer before final rinsing of the structures with PGMEA and Isopropanol (IPA ...
-
bioRxiv - Cell Biology 2022Quote: Poly(ethylene glycol) methyl ethers (Mn = 750) were purchased from Sigma-Aldrich (#202495). All protected α-amino acids were purchased from Watanabe Chemical Industries ...
-
bioRxiv - Bioengineering 2024Quote: ... poly(ethylene glycol) methyl ether acrylate [average Mn = 480 Da] (PEGA9, Sigma-Aldrich), 2,2’-Azobis(2-methylpropionitrile ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... and 28 to 30% polyethylene glycol (PEG) mono ethylene ether 500 (Sigma-Aldrich) at 4°C ...
-
bioRxiv - Biophysics 2024Quote: ... the mold was developed in propylene glycol methyl ether acetate (PGMEA, Sigma Aldrich), creating the final master mold with six device impressions on a single wafer ...
-
bioRxiv - Biophysics 2021Quote: ... Prior to development through immersion in propylene glycol monomethyl ether acetate (PGMEA, Sigma-Aldrich), a second layer of SU-8 3025 at 20 μm in height was spin-coated ...
-
bioRxiv - Bioengineering 2020Quote: ... the wafer is developed in propylene-glycol-mono-methyl-ether-acetate (PGMEA) (Merk Millipore) for 7 minutes ...
-
bioRxiv - Biophysics 2024Quote: ... Excessive SU-8 photoresist was removed using propylene glycol methyl ether acetate (PGMEA; Sigma). The wafer with SU-8 patterns (i.e. ...
-
bioRxiv - Bioengineering 2024Quote: ... 50 μl of poly(ethylene glycol) 2-mercaptoethyl ether acetic acid (Mn 2,100, Sigma Aldrich) was added dropwise ...
-
bioRxiv - Molecular Biology 2020Quote: ... sodium ethylene glycol-bis(β-aminoethyl ether)-N,N,N′,N′-tetraacetic acid (Sigma-Aldrich E8145), sodium carbonate (Ajax Finechem 463) ...
-
bioRxiv - Developmental Biology 2022Quote: ... the slides were developed for 7 min in propylene glycol monomethyl ether acetate (PGMEA, Sigma-Aldrich), followed by 5 min rinsing with ultrapure isopropanol and gentle blow-drying ...
-
bioRxiv - Biophysics 2023Quote: ... the master was placed into a solution of propylene glycol methyl ether acetate (PGMEA, Sigma-Aldrich), which helped in the development process ...
-
bioRxiv - Cancer Biology 2021Quote: ... or ethylene glycol-bis(β-aminoethyl ether)-N,N,N’,N’-tetraacetic acid (EGTA)(Sigma; Cat# RES3010E) (0.6mM diluted in DMSO) ...
-
bioRxiv - Bioengineering 2021Quote: ... Developer was applied with the SUEX master face-down in Propylene glycol methyl ether acetate (PGMEA, Sigma) until fully developed ...
-
bioRxiv - Neuroscience 2021Quote: ... 2mM ethylene glycol-bis (β-aminoethyl ether)-N,N,N’,N’-tetraacetic acid (EGTA, Sigma-Aldrich, E8145); 0.32M sucrose (Merk ...
-
bioRxiv - Biophysics 2024Quote: ... The microfluidic pattern was developed by soaking the wafer in propylene glycol methyl ether acetate (Sigma Aldrich). After drying and washing the SU-8 mold ...
-
bioRxiv - Bioengineering 2022Quote: ... This procedure was repeated for additional layers prior to development in propylene glycol monomethyl ether acetate (Millipore Sigma). After developing ...
-
bioRxiv - Physiology 2021Quote: ... Samples were then cleared with 80% ECi and 20% poly(ethylene glycol) methyl ether methacrylate (PEGM) (Sigma, cat: 447943) under gentle rotation at room temperature for a minimum of 30 minutes.
-
bioRxiv - Developmental Biology 2021Quote: ... 5 mM ethylene glycol-bis(β-aminoethyl ether)-N,N,N′,N′-tetra acetic acid (EGTA) (Sigma #E4378-10G)) and positively selected using 10 uL PDGFRα antibody-coated microbeads (1:10 ...
-
bioRxiv - Physiology 2022Quote: ... and Dibenzyl ether (Dibenzyl ether [DBE] - Sigma-Aldrich).
-
bioRxiv - Biochemistry 2021Quote: ... Cysteine Biotinylation was carried out using Poly(ethylene glycol) [N-(2-maleimidoethyl)carbamoyl]methyl ether 2-(biotinylamino)ethane (Sigma 757748) (Biotin-maleamide) ...
-
bioRxiv - Cell Biology 2021Quote: ... sphere (1.5 μm – 3 μm)) coated with 8.45 mM poly(ethylene glycol)methyl ether thiol (Mn 800, Cat. No. 729108, Sigma Aldrich) solution for 2 h at room temperature were used ...
-
bioRxiv - Bioengineering 2024Quote: ... hard baked at 95°C for 5 to 10 min and developed in propylene glycol monomethyl ether acetate (Sigma Aldrich). For the microfluidic devices ...
-
bioRxiv - Microbiology 2023Quote: ... the developing step took place by submerging SU-8 coated wafer into propylene glycol monomethyl ether acetate (PGMEA; Sigma-Aldrich) solution and incubating in it for 8 min with periodical agitation ...
-
bioRxiv - Bioengineering 2024Quote: ... The instrument was calibrated against a poly(ethylene glycol) methyl ether standard (Sigma Aldrich, Average Mn = 2,000 g mol-1) prepared under the same conditions with DCTB matrix.
-
bioRxiv - Cell Biology 2020Quote: ... the wafer was baked at 95°C for 2 min and cooled to room temperature and developed in a propylene glycol monomethyl ether acetate (Sigma Aldrich) bath ...
-
bioRxiv - Neuroscience 2022Quote: ... ethylene glycol-bis(β-aminoethyl ether)-N,N,N’,N’-tetraacetic acid (EGTA; Cat#E3889, Sigma-Aldrich, St Louis, MO, USA) 1 mM ...
-
bioRxiv - Bioengineering 2022Quote: ... Pt was deposited by DC magnetron sputtering (150 nm) followed by lift-off in propylene glycol monomethyl ether acetate (PGMEA, Sigma-Aldrich) during sonication (20 min) ...
-
bioRxiv - Bioengineering 2024Quote: ... as inhibitor), and poly(ethylene glycol) methyl ether methacrylate (MEMA-PEG, 950 g/mol, MEHQ as inhibitor) are purchased from Sigma Aldrich and purified by recrystallizing in acetone to remove inhibitors ...
-
bioRxiv - Cell Biology 2023Quote: ... hydrated and stained for TRAP as follows: Substrate solution was prepared by adding 1 mL Ethylene Glycol Monoethyl Ether (E2632, Sigma-Aldrich) to 20 mg naphthol AS-MX phosphate (N4875 ...
-
bioRxiv - Biochemistry 2024Quote: ... Post-exposure baking at 95 °C for 5 min was then followed by developing with propylene glycol methyl ether acetate (PGMEA, Sigma-Aldrich) and a washing step with isopropanol (IPA ...
-
Controlled Fluorescent Labelling of Metal Oxide Nanoparticles for Artefact-free Live Cell MicroscopybioRxiv - Biophysics 2021Quote: ... KOH (Sigma Aldrich), KCL (Merck) ...
-
bioRxiv - Cell Biology 2021Quote: 1.5 µM ethylene glycol-bis(β-aminoethyl ether)-N,N,N’,N’-tetraacetic acid (EGTA) or 5 µM cyclopiazonic acid (CPA, CalBiochem-EMD Millipore). For Ca2+ replenishment ...
-
bioRxiv - Bioengineering 2023Quote: Cells were incubated in 5 mM ethylene glycol-bis(β-aminoethyl ether)-N,N,N′,N′-tetraacetic acid EGTA (Sigma-Aldrich, E3889) diluted in Endothelial Growth Medium at 37°C and 5% CO2 for 2 hours ...
-
bioRxiv - Biophysics 2023Quote: ... delipidation solutions for 1–2 days at 37°C in a shaker, tB-PEG (containing 70% tB, 27% (v/v) poly (ethylene glycol) methyl ether methacrylate average Mn500 (Sigma-Aldrich, 447943) and 3% (w/v ...
-
bioRxiv - Cell Biology 2022Quote: ... Benzyl ether (108014, Sigma) was subsequently added for 16 hours.
-
bioRxiv - Neuroscience 2021Quote: ... Dibenzyl ether (DBE; Sigma) overnight at room temperature on an orbital shaker ...