Labshake search
Citations for Diatome U.S. :
1 - 19 of 19 citations for 6 AMINO 6 DEOXY 1 2 3 4 DI O ISOPROPYLIDENE D GALACTOPYRANOSIDE since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2020Quote: ... with a 6 mm wide histo diamond knife (Diatome, Hatfield, PA) was used cut 500 nm thick sections ...
-
bioRxiv - Biophysics 2021Quote: ... using a 45° diamond trimming knife with a clearance angle of 6°C (DiAtome). The sample was glued to a custom 3D-printed shuttle after the Leica design (22 ...
-
bioRxiv - Cell Biology 2020Quote: ... we cut 60 nm serial sections with a Leica Ultra microtome (UC-6) using an Ultra 35 Jumbo diamond knife (Diatome) and picked up on ITO coated coverslips using the ASH-100 Advanced Substrate Holder (RMC Boeckeler) ...
-
bioRxiv - Neuroscience 2024Quote: Blocks were trimmed to a hexagonal block face approximately 1 × 2 mm with a 45° diamond trimming knife (DiATOME, Hatfield, PA) followed by imaging in a Zeiss Xradia 520 Versa 3D X-ray microscope (Carl Zeiss Microscopy LLC ...
-
bioRxiv - Neuroscience 2020Quote: ... and diamond knife (4 mm, 35° Ultra or Ultra-Maxi, Diatome) were used to cut ultra-thin serial sections (∼45 nm ...
-
bioRxiv - Neuroscience 2021Quote: ... The resin block was trimmed using a 3 mm UltraTrim diamond knife (Diatome, USA) and ultramicrotome (UC6 ...
-
bioRxiv - Neuroscience 2024Quote: ... at 30-35 nm with 4 mm 35° diamond knives (DiATOME, Hatfield, PA). Reels of collected tape were cut into strips and attached to 100 mm diameter silicon wafers via double-sided conductive tape ...
-
bioRxiv - Pathology 2021Quote: ... using a cryo-immuno diamond knife (35° - size 2 mm, Diatome). The cryosections were transferred to photonic chips fitted with a PDMS frame and stored at 4 °C before staining ...
-
bioRxiv - Neuroscience 2024Quote: ... All sections were cut at a nominal thickness of 35 nm (4 mm ultra35° knife, DiATOME, Switzerland) and a cutting speed of 0.3 mm/s within a total experiment time of 28 hours ...
-
bioRxiv - Cell Biology 2023Quote: ... Serial ultrathin sections of 70 nm thickness were cut with a 4 mm Ultra 35 diamond knife (Diatome) and lifted up with the plasma-treated tape using an automated tape-collecting Ultramicrotome ATUMtome (RMC Boeckeler).
-
bioRxiv - Neuroscience 2023Quote: ... and the corners of the rectangle were then trimmed to form an arrow-point on each end of the now six-sided polygon block using a 3 mm ultratrim diamond knife (Diatome, USA) and a UC6 ultramicrotome (Leica ...
-
bioRxiv - Developmental Biology 2022Quote: ... Ultrathin sections (70nm) were cut from polymerized samples using a Leica UC7 ultramicrotome equipped with a 3 mm diamond knife (Diatome, Biel, Switzerland) and placed on 3.05 mm Formvar Carbon coated TEM copper slot grids (Plano GmbH ...
-
bioRxiv - Neuroscience 2023Quote: ... 1 µm-thick sections were cut with an 8.0 mm diamond knife (Diatome Histo AT 110 ...
-
bioRxiv - Developmental Biology 2022Quote: ... semi-thin (1 μm) plastic sections were cut with a diamond knife (Histo, DiATOME) on a microtome (RM2265 ...
-
bioRxiv - Genetics 2019Quote: ... semi-thin (1 μM) sections were cut with a DiATOME Histo diamond knife (HI10213; DiATOME, Hatfield, PA) on a PowerTome XL microtome (Boeckeler Instruments ...
-
bioRxiv - Biophysics 2022Quote: ... Semi-thin transverse sections (0.5 to 1 μm) were cut with a Histo diamond knife (Diatome Ltd, Nidau, Switzerland) installed on a Ultracut S microtome (Leica Microsystems ...
-
bioRxiv - Cell Biology 2023Quote: ... RPE-1 cells were cut into 100-nm-thick (nominal) cryosections using a 35° diamond knife (Diatome Cryo35, Nidau, Switzerland). We used the dual-micromanipulator method (Ladinsky et al. ...
-
bioRxiv - Cell Biology 2023Quote: ... Sections 1 µm thick were obtained using an ultramicrotome (LKB Ultratome V) equipped with an Histo-Jumbo diamond knife (Diatome). Chains of sections were created through the application of glue at the base of the embedded sample ...
-
bioRxiv - Biophysics 2022Quote: ... very thin sections (about 50 nm thick in the last step) were made at a low cutting speed (≈1 mm/s) using an Ultra AFM diamond knife (Diatome Ltd, Nidau, Switzerland) to obtain a nearly perfect flat surface ...