Labshake search
Citations for BioSpec :
1 - 48 of 48 citations for Recombinant Human Chemokine C X C Motif Ligand 10 since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Genetics 2023Quote: ... Cells were lysed using a FastPrep (MP) bead beater (5 x 90 second runs at 4°C) and acid-washed glass beads (BioSpec), centrifuged ...
-
bioRxiv - Molecular Biology 2022Quote: ... 10 mM β-mercaptoethanol) and lysed at 4 °C with glass beads in a BeadBeater (BioSpec). After centrifugation ...
-
bioRxiv - Biochemistry 2023Quote: ... 4 °C) and then resuspended in 350 μl of Buffer A x Protease Inhibitors and ∼450 μl glass beads (1mm, BioSpec Products). The buffer solution should be enough to cover the beads by a thin layer ...
-
bioRxiv - Molecular Biology 2022Quote: ... was homogenized at 4°C using 700 µL zirconia beads (BioSpec, 110791) in Precellys 24 homogenizer (Bertin Technologies ...
-
bioRxiv - Microbiology 2023Quote: ... Mosquitoe(s) were homogenised with 10 x 1.0 mm zirconia-silica beads (BioSpec Products), with 597 µL of Buffer RLT and 2.8 µL of carrier RNA ...
-
bioRxiv - Molecular Biology 2023Quote: ... Cells were disrupted for 1 minute at 4 °C in a Mini BeadBeater (BioSpec Products) with acid-washed glass beads ...
-
bioRxiv - Plant Biology 2020Quote: ... Samples were incubated at 80°C for 30 min with 0.5 mm zirconia/silica beads (Biospec) and vortexed several times at full speed for 10 min each to favour tissues disruption ...
-
bioRxiv - Microbiology 2020Quote: ... 2 min at 4°C between individual beating steps) using a Mini-Beadbeater-16 (Biospec Products, Bartlesville OK). Homogenized samples were centrifuged (12,000 x g ...
-
bioRxiv - Molecular Biology 2021Quote: ... Cells were pelleted at 6000 rpm for 2 minutes at 4°C and the pellet was resuspended in FA lysis buffer and Zirconia beads (0.7 mm diameter, Biospec). Cells were broken using a cell homogenizer (Bertin Instruments ...
-
bioRxiv - Genomics 2022Quote: ... Cells were lysed at 4°C by repeated vigorous agitation with 0.5mm zirconia/silica beads in a bead beater (Biospec) using 4 cycles of 60 s with 75 s of rest in between cycles ...
-
bioRxiv - Microbiology 2022Quote: Immediately after the fluorescence microscopy measurements (section 2.4), we dried (60 °C, 24 h) and ground (1 min, Mini bead beater 16; Biospec products) the 1.5 BSC disks used for the cyanobacteria/liverwort cover analysis and stored them at -80 °C for up to four months for DNA extraction ...
-
bioRxiv - Microbiology 2019Quote: ... a 96 well plate (Axygen P-DW-20-C) was loaded with 1 mL of 0.1 mm Zirconia Silica beads (Biospec 11079101Z) using a loading device (Biospec 702L) ...
-
bioRxiv - Genomics 2022Quote: ... Tubes were thawed at 70°C in a water bath after which 200 µL of 0.5 mm zirconia/silica beads (BioSpec Products) were added ...
-
bioRxiv - Genetics 2020Quote: ... were resuspended in 1 ml of 155 mM ammonium formate and lysed at 4 °C with 400 µl of acid-washed glass beads using a Mini-Beadbeater (Biospec). Lysates corresponding with 0.4 OD units were subsequently spiked with internal lipid standards and subjected to two-step lipid extraction [68] ...
-
bioRxiv - Microbiology 2019Quote: ... This included a combination of 5 min of heat (65°C) followed by 5 min of bead-beating for cell disruption on a Mini-Beadbeater-24 (Biospec, U.S.A.). After extraction the DNA was checked for quality by gel electrophoresis and quantified using a Qubit 4 (Thermo Fisher Scientific ...
-
bioRxiv - Immunology 2023Quote: ... per kit instructions and included 2 cycles of 1 minute of bead beating at 4°C on a Mini-Bead-Beater 16 (BioSpec Products). The V3 and V4 regions of the 16S rRNA gene was amplified with a single round of PCR using primers that contained (described 3’ to 5’ ...
-
bioRxiv - Microbiology 2021Quote: ... 0.1% Triton X-100) and ~20 1-mm glass beads (BioSpec) in a Precellys 24 grinder (Bertin Technologies ...
-
bioRxiv - Molecular Biology 2023Quote: ... and 5 X 1 minute disruption in Mini-Beadbeater-8 (Biospec Products) at 4° ...
-
bioRxiv - Microbiology 2023Quote: ... Samples were homogenized by 4 x 40s bead-beating using the Beadbeater-24 (Biospec) alternated with 2 min incubation on ice ...
-
bioRxiv - Microbiology 2023Quote: ... Pellets were then bead beaten (2 x one minute) using 0.1mm zirconia/silica beads (BioSpec). Triton-X-100 was then added to lysates at a final concentration of 1% to solubilize membrane proteins and vortexed to mix.
-
bioRxiv - Molecular Biology 2021Quote: ... Human trapezial cartilage was ground to a powder using Cryo-Cup Grinder (Biospec, Bartlesville) and then RNA was extracted using Qiagen RNeasy Micro Kit.
-
bioRxiv - Microbiology 2021Quote: Human stool samples were homogenized with bead beating for 5 min (Mini-Beadbeater-96, BioSpec) using beads of mixed size and material (Lysing Matrix E 2mL Tube ...
-
bioRxiv - Molecular Biology 2021Quote: Human trapezium bone tissue was ground to a powder using Cryo-Cup Grinder (Biospec, Bartlesville), from which genomic DNA (gDNA ...
-
bioRxiv - Cell Biology 2023Quote: ... 1% Triton X-100 supplemented with protease inhibitors) and were lysed with 0.5-mm glass beads (BioSpec #11079105) in a cell disrupter (Mini-Beadbeater ...
-
bioRxiv - Plant Biology 2023Quote: ... 500 µl – 700 µl chilled silicon bead slurry (MOPs buffer, 0.1% Triton X-100 and 50% (v/v) Zirconia/Silica beads (0.5 mm; Biospec) was added to each tube containing the cell pellets ...
-
bioRxiv - Molecular Biology 2019Quote: ... 2% Triton X-100) and cells were lysed in the presence of 0.3mm glass beads (Biospec products, Inc. 11079105). Phenol-chloroform (50:50 ...
-
bioRxiv - Microbiology 2023Quote: ... organs were excised and homogenized with 2 x 2.3 mm stainless steel beads for 2 minutes with a bead beater (BioSpec). Organs were plated and diluted on LB + Kanamycin (for CHS7 ...
-
bioRxiv - Bioengineering 2022Quote: ... were washed in PBS and disintegrated in 0.5 mL of 0.2% (v/v) Triton X-100 and 5 mM MgCl2 solution using steel beads and a Mini Beadbeater™ (Biospec). The remaining solution was centrifuged at 3000g for 10 minutes ...
-
bioRxiv - Bioengineering 2021Quote: ... were washed with PBS and each disintegrated in 500 μL of 0.2% (v/v) Triton X-100 and 5 mM MgCl2 solution using steel balls and a minibeadbeater™ (Biospec, USA). The solids were separated by centrifugation (3000 g ...
-
bioRxiv - Microbiology 2019Quote: ... 700 μL of cold methanol and 140 μL of EDTA 0.1M were added and vigorously mixed (4 x 45 s) in a mini-bead-beater-8 (Biospec Products, Qiagen). By this way ...
-
bioRxiv - Molecular Biology 2023Quote: ... at 6.0 m/s (3 x 30 s, 5 min pause time) using 1.0 mm zirconia/glass beads (Biospec Products, OK, USA). After centrifugation for 10 min at 15,000 x g and 4 °C with a 5415R benchtop microcentrifuge (Eppendorf ...
-
bioRxiv - Microbiology 2022Quote: ... placed in a microvial rack, and violently shaken (3 times 10 sec, 10 sec interval) in a bead beater (BioSpec Products; Mini Beadbeater) to disrupt the cells and tissues ...
-
bioRxiv - Neuroscience 2023Quote: ... X-ray computed tomography (CT, 3D Accuitomo 170, J. Morita, Kyoto, Japan) and 7 Tesla magnetic resonance (MR) images (BioSpec 70/40, Bruker) were acquired under anesthesia (continuous infusion of propofol 0.2–0.6 mg/kg/min ...
-
bioRxiv - Molecular Biology 2019Quote: ... Bead tubes were subjected to bead beating (17 000 x g, 3 minutes) in a Mini Bead Beater-8 (BioSpec Products, Bartlesville, OK, USA). Bead tubes were centrifuged (13 000 x g ...
-
bioRxiv - Biophysics 2023Quote: ... 10 μg/ml DNAse I and lysed using a BeadBeater (BioSpec). The lysate was then clarified by centrifugation and passed over a Ni2+-chelating column ...
-
bioRxiv - Pathology 2020Quote: ... then agitating for 10 seconds in a Mini-BeadBeater-16 (BioSpec, Bartlesville, OK, USA). The homogenates were then centrifuged for 10 seconds in a bench top centrifuge (Eppendorf ...
-
bioRxiv - Biochemistry 2023Quote: ... and homogenized (6,500 rpm, 30 s) with 10-15 1 mm silica/zirconia beads (Biospec Products) using a BeadBlaster-24 homogenizer (Benchmark) ...
-
bioRxiv - Plant Biology 2023Quote: Equal volume of ethyl acetate (ACS reagent grade; J.T. Baker) and approximate 10 g of 0.5 mm glass beads (BioSpec) were added to 400 mL of induced TS-expressing yeast culture in a 2 L flask ...
-
bioRxiv - Microbiology 2021Quote: ... mixed with 1 mL of 0.005 M NaOH containing 10 μg/mL caproic acid-6,6,6-d3 (internal standard) and 1.0 mm diameter zirconia/silica beads (BioSpec, Bartlesville, OK). The mixture was thoroughly homogenized and centrifuged (13,200 g ...
-
bioRxiv - Bioengineering 2020Quote: ... Each scaffold was disintegrated at 25’000 rpm for 10 seconds per cycle (6 cycles) using steel balls and a Minibead Beater (Biospec). Samples were placed on ice in between cycles ...
-
bioRxiv - Biophysics 2020Quote: ... suspending in reservoir solution and vortexing for 60 s in the reservoir solution with approximately 10 glass beads (1.0mm diameter, BioSpec products). Adding DMSO to the protein solution to a concentration of 5% and performing microseed matrix screening ...
-
bioRxiv - Microbiology 2024Quote: ... followed by the addition of 10 µl proteinase K and sterile zirconia beads (1.0 mm, 20-30; BioSpec, Inc., USA). For thorough mixing ...
-
bioRxiv - Molecular Biology 2024Quote: ... Tissue was homogenized 10 seconds in a mini-bead beater using 1.0 mm glass beads (BioSpec Products, Bartlesville, OK, USA) at 2500 rpm ...
-
bioRxiv - Biochemistry 2020Quote: ... Brain homogenates (BH; 10% w/v) were prepared by homogenizing the tissue in PBS using a Bead Beater (Biospec Products; 11079110z) for 1 min at maximum speed ...
-
bioRxiv - Microbiology 2022Quote: ... and 10 µL proteinase K were mixed and bead-beaten for 2 × 30 seconds (Bead Mill Homogenizer, BioSpec, Bartlesville, Oklahoma, USA), and then centrifuged for 2-7 minutes at 10000 × g until the supernatant was clear ...
-
bioRxiv - Biophysics 2020Quote: ... by performing 12 pulses of 60 s intense vortexing (with at least 60 s of rest in between pulses) in 10 mL 0.5-mm zirconia silica beads (BioSpec, Bartlesville, OK, USA; #11079105z), 25 mL of lysis buffer (50 mM sodium phosphate ...
-
bioRxiv - Biochemistry 2020Quote: ... Cells were lysed in a 1.5 mL centrifuge tube with denaturing lysis buffer (8 M urea, 50 mM NH4HCO3, 10 mM IAA) and 0.5 mm glass beads (Biospec Products Inc., Bartlesville, OK). Protein concentration of yeast lysate was measured by a Coomassie stained SDS gel(Xu et al. ...
-
bioRxiv - Plant Biology 2023Quote: ... 10 mM EDTA) and transferred to 96-well plates containing 500 µL 1 mm garnet rocks per well (Biospec Products, Bartlesville, OK, USA), after which DNA purification proceeded via bead-beating and chemical lysis as previously described (Wagner et al ...