Labshake search
Citations for A-M Systems :
1 - 14 of 14 citations for 6 Chloro n propylpyridine 3 carboxamide since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2020Quote: ... a polyethylene tubing (3 mm inner diameter; A-M Systems), which acted as the active electrode for tRNS ...
-
bioRxiv - Neuroscience 2023Quote: ... A single-barreled glass capillary with a filament (1.0 × 0.58 mm2, 6” A-M Systems, Inc., WA) was pulled to a tip using a Kopf Pipette Puller (David Kopf Instruments ...
-
bioRxiv - Neuroscience 2024Quote: ... It included 3 stainless steel wires (0.127 mm bare, uncoated, A-M Systems) that protruded ∼0.5 mm beyond the tip ...
-
bioRxiv - Neuroscience 2019Quote: ... A single-barreled glass capillary with filament (1.0 x 0.58 mm2, 6” A-M Systems, Inc., Sequim, WA) was pulled using a Kopf Pipette Puller (David Kopf Instruments ...
-
bioRxiv - Neuroscience 2019Quote: ... A bundle of stainless steel wires (3-4 wires per bundle) (790500, A-M Systems) was inserted into RSC ...
-
bioRxiv - Neuroscience 2022Quote: ... The electrodes were five 3 mm tungsten rods (254 μm diameter, A-M Systems 717200) cut to 3 mm and ground to a 100 μm tip with a Dremel rotary tool.
-
bioRxiv - Neuroscience 2019Quote: We fabricated bundles of stainless steel wire electrodes (2-3 wires per bundle) (790500, A-M Systems). The diameter of an electrode was 114.3 µm and 50.8 µm with and without coating respectively ...
-
bioRxiv - Neuroscience 2021Quote: ... All recording electrodes (3-8 MΩ) were pulled from thin-walled capillary glass (A-M Systems, Carlsborg, WA) using a Sutter Instruments P97 puller ...
-
bioRxiv - Neuroscience 2023Quote: ... The copper-mesh surrounding the 3-D printed head cap was connected via a stainless-steel wire (A-M Systems, #792800) to a ground screw in the skull and served as a Faraday cage ...
-
bioRxiv - Neuroscience 2021Quote: ... Extracellular field EPSPs were recorded with borosilicate glass pipettes (3–4MΩ) filled with ACSF using a differential extracellular amplifier (Microelectrode AC Amplifier Model 1800, A-M Systems), filtered at 2 kHz ...
-
bioRxiv - Physiology 2019Quote: ... Both the electrode and the electrode holder were filled with 3 M KCl and connected to a DC amplifier (model 1600 A-M Systems). Voltage was adjusted to zero with the electrode tip in locust saline ...
-
bioRxiv - Neuroscience 2020Quote: ... ChR2-expressing axon terminals were stimulated by 5-20 ms laser pulses (3-10 mW) from a 473 nm laser delivered via fiber optic inside the recording pipette (Optopatcher, A-M Systems). To confirm the direct nature of optogenetically evoked currents 2μM TTX (Tocris ...
-
bioRxiv - Physiology 2021Quote: ... back-filled with 500 mM KCl and with 3 M KCl in the electrode holder) and amplified using a model 1600 Neuroprobe amplifier (A-M Systems). All electrophysiological signals were digitized (1440A digitizer ...
-
bioRxiv - Neuroscience 2020Quote: ... EMG electrodes were made in-house and consisted of Teflon-coated 3 or 7 -strand stainless steel wire with 50 to 100 mm length (A-M Systems, Sequim, WA), threaded into a 30-mm ...