Labshake search
Citations for Polysciences :
601 - 650 of 1050 citations for 2 Chloro 1 1 trifluoromethyl 1 3 4 9 tetrahydro 2H beta carbolin 2 yl ethan 1 one since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
Novel amiloride derivatives that inhibit bacterial motility across multiple strains and stator typesbioRxiv - Microbiology 2021Quote: ... and incubated for 10 mins and washed with motility buffer and flushed with 1 μm polystyrene bead (Polysciences, Inc) solution ...
-
bioRxiv - Immunology 2021Quote: ... 480µg of each plasmid was co-transfected with 120µg of BirA (Howarth et al., 2008) and 12mg PEI-Max (1 mg/mL solution, Polysciences) in the presence of 200 µM biotin (final concentration) ...
-
bioRxiv - Neuroscience 2021Quote: ... Day 1 adults were placed on a 10% agarose pad and immobilized with a slurry of polystyrene beads (Polysciences). A 1KHz train of 100 fs pulses (15-30 nJ/pulse ...
-
bioRxiv - Cell Biology 2022Quote: ... HEK293T cells were cultured in T75 flasks and transfected at approximately 70% confluency with 7500 ng of the lentiviral vector of interest and packaging plasmids pCMV-dR8.91 (6750 ng) and pCMV-VSV-G (750 ng) with 75 µL of polyethyleneimine (PEI, 1 mg/mL; Polysciences). Approximately 72 hours after transfection ...
-
bioRxiv - Immunology 2021Quote: ... pSIREN- or pMXs-based plasmids were co-transfected together with pVSVG into Plat-E cells (kindly provided by T. Kitamura, University of Tokyo) using PEI Max (Mw 40,000, 24765-1; Polysciences). The virus-containing supernatant was harvested 2 days after transfection ...
-
bioRxiv - Microbiology 2021Quote: ... and sorting efficiency was verified manually by sorting a specified number of 1-μm yellow-green microspheres (Polysciences, USA) onto a glass slide and counting the beads under an epifluorescence microscope ...
-
bioRxiv - Microbiology 2022Quote: ... B16F10 cells (2,500,000 cells) were transfected with 5 μg S expression plasmid by PEI Max (Polysciences, Cat# 24765-1) according to the manufacturer’s protocol ...
-
bioRxiv - Microbiology 2020Quote: ... was performed by transfecting HEK293T cells in five 15 cm tissue culture plates using PEI (Polyethylenimin Linear, MW 25,000, 23966-1-A, Polysciences) transfection method (45) ...
-
bioRxiv - Biochemistry 2020Quote: ... For formation of DNA:PEI complexes 1 μg DNA/mL transfection volume and 5 μg of 40 kDa PEI (Polysciences) were first diluted separately in 5% transfection volume in supplemented F17 media ...
-
Fast and sensitive diffuse correlation spectroscopy with highly parallelized single photon detectionbioRxiv - Neuroscience 2020Quote: Our decorrelating tissue phantom was created by a 1 μm polystyrene microsphere-in-water suspension (Polysciences, inc.; Warrington, PA) in custom made cuvettes ...
-
bioRxiv - Microbiology 2023Quote: ... HIV-1 were obtained by transfection of HEK293T cells with HIV-1 proviral DNA along with a VSV-G expression vector (pMD.G) and polyethylenimine (PEI) (Polysciences). Twenty-four hours after transfection ...
-
bioRxiv - Immunology 2022Quote: ... expi293F cells were transfected with antibody expression plasmids at a density of 2.5 million cells per/ml using 1 mg/ml PEI-Max transfection reagent (Polysciences). Supernatants were harvested 4-5 days post-transfection and tested for their SARS-CoV-2 RBD binding potential by enzyme-linked immunosorbent assay (ELISA) ...
-
bioRxiv - Cell Biology 2024Quote: ... or with GFP-tau and vectors pCDNA3 overexpressing Cdk5 and p25 (1:0.85:0.15) using linear Polyethylenimine (PEI; Polysciences, Inc.). Cells were harvested 48 hours after transfection by centrifugation and flash-frozen ...
-
bioRxiv - Immunology 2023Quote: ... the remained solvent was blotted and three drops of 1% uranyl acetate (Uranyl Acetate 98%, ACS Reagent, Polysciences, Inc.) was applied on the grid for staining purpose ...
-
bioRxiv - Microbiology 2023Quote: HIV-1 viruses were generated by transfection of proviral DNA into HEK293T cells via polyethylenimine (PEI, Polysciences, Cat. #23966) transfection protocol ...
-
bioRxiv - Biophysics 2023Quote: ... The cells in each well were transiently transfected with 1 μg DNA plasmid using 3μg linear polyethyleneimine (PEI, MW 25000, Polysciences) according to the manufacturer’s instructions ...
-
bioRxiv - Cell Biology 2023Quote: ... Imaging was carried out by placing adult worms in 1.5 μl of M9 mixed with 1.5 μl of 1 μm polysterene microspheres (Polysciences Inc.) on a coverslip which was mounted carefully onto a 5% agarose pad.
-
bioRxiv - Bioengineering 2023Quote: ... isolated with ultracentrifugation were resuspended and incubated in 2.5% glutaraldehyde for 1 hour at room temperature and loaded on plasma cleaned carbon-coated copper grid (Polysciences). Fixed MBV samples were incubated on the grids for 20 min at room temperature ...
-
bioRxiv - Neuroscience 2023Quote: ... followed by brief nuclear counterstaining using Hoechst (1:10,000) in PBS and mounting on a glass slide with Aqua-Poly-Mount (Polysciences).
-
bioRxiv - Microbiology 2023Quote: ... Fluoresbrite® yellow-green polystyrene-based microspheres with a diameter of 1 µm (Cat# 17154-10) purchased from Polysciences as 2.5% w/v in a sterile aqueous suspension without sodium azide ...
-
bioRxiv - Neuroscience 2024Quote: ... the left sides of the brains were placed (anterior portion facing downwards) in disposable cryomold (Polysciences Inc. #18986– 1), and frozen in O.C.T ...
-
bioRxiv - Neuroscience 2024Quote: ... the transfer and pDGM6 packaging plasmids were co-transfected in 293T cells (ATCC) using PEI reagent (Polysciences, 23966-1), as described previously 52 ...
-
bioRxiv - Microbiology 2024Quote: ... Transient DNA transfections were performed using linear poly(ethylenimine) (1 mg/mL of solution in 10 mM Tris-HCl, pH 6.8; Polysciences), Lipofectamine 2000 (Invitrogen) ...
-
bioRxiv - Bioengineering 2024Quote: ... 8.3 µg psPAX and 2.5 µg pMD2.G were mixed with 80 µg PEI MAX 40K (Polysciences, 24765–1) in 1.5 ml of Expi293 media ...
-
bioRxiv - Neuroscience 2024Quote: ... Cells at ∼80% confluency were transfected with DNA plasmids using polyethyleneimine max according to the manufacturer’s manual (PEI Max; 24765-1, Polysciences). For CaST experiments ...
-
bioRxiv - Bioengineering 2024Quote: ... isolated with ultracentrifugation were resuspended and incubated in 2.5% glutaraldehyde for 1 hour at room temperature and loaded on plasma cleaned carbon-coated copper grid (Polysciences). Fixed EV samples were incubated on the grids for 20 min at room temperature ...
-
bioRxiv - Biochemistry 2024Quote: ... and 0.5-1 μg/mL of each construct was transfected with 5 μg/mL polyethyleneimine (PEI-25K; Polysciences, 23966). 24 hr after transfection ...
-
bioRxiv - Biochemistry 2024Quote: ... pEGFP-N1-RHBDL4 was transfected as a 1:10 mix with empty pcDNA3.1 plasmid into Hek293T cells (ATTC) using 25-kDa linear polyethylenimine (Polysciences) as had been described (Knopf et al ...
-
bioRxiv - Developmental Biology 2024Quote: ... A second droplet of (∼ 10 µl) of a solution of 1 µm polystyrene microspheres (Polysciences, cat. no. 07310-15) was then added and gently mixed ...
-
bioRxiv - Cell Biology 2022Quote: ... 2-3μl of 1.25% (w/v) polystyrene microspheres (Polybead Microspheres 0.05μm, Polysciences) and 0.2mM levamisole (Sigma ...
-
bioRxiv - Microbiology 2021Quote: ... Cells were fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Polysciences Inc., Warrington, PA) in 100 mM sodium cacodylate buffer pH 7.2 for 1 h at room temperature and subsequently transferred to 4°C overnight ...
-
bioRxiv - Microbiology 2022Quote: ... samples were fixed in 2% paraformaldehyde/2.5% glutaraldehyde (Polysciences Inc., Warrington, PA) in 100mM PIPES/0.5mM MgCl2 ...
-
bioRxiv - Bioengineering 2021Quote: ... were produced as previously described using a PEI (polyethylenimine, Polysciences, 24765-2) transfection protocol followed by iodixanol gradient purification ...
-
bioRxiv - Cell Biology 2022Quote: ... and 48 μL of Polyethylenimine ‘Max’ MW 40,000 Da (Polysciences; 24765-2) per plate ...
-
bioRxiv - Physiology 2022Quote: ... C3H10T1/2 cells were transfected with Transporter 5® Transfection Reagent (Polysciences) following manufacture’s protocol ...
-
bioRxiv - Neuroscience 2023Quote: ... with 2 μl of 100 nm polystyrene beads (Cat# 00876-15, Polysciences) and 2 μl of levamisole (from 500 μM stock ...
-
bioRxiv - Pathology 2024Quote: ... Vector preparations were generated by polyethylenimine or PEI (Polysciences, Cat #24765-2) triple transfection of pACM-Delta ITR-flanked transgene ...
-
bioRxiv - Molecular Biology 2024Quote: ... U2OS or HeLa cells were transfected using polyethylenimine (PEI) (23966-2 Polysciences) at a 1:3 plasmid to PEI ratio ...
-
bioRxiv - Molecular Biology 2021Quote: Lentivirus expressing short-hairpin RNAs was prepared by transfecting PLKO.1 shRNA plasmids and packaging plasmids containing psPAX2 and pMD2.G into 293T cells using PEI (Polysciences). Collected conditional media containing virus particles were used to transduce cells in the growth media supplemented with Polybrene for 24 hours ...
-
bioRxiv - Microbiology 2021Quote: ... expression medium was added to reduce cell density to 1.0 × 106 ml−1 for transfection with polyethyleneimine (PEI) (Polysciences, Inc). Next ...
-
bioRxiv - Microbiology 2021Quote: ... the construct was expressed in 293F by transfecting with PEIMAX PEI MAX™ (24765-1, Polysciences, Inc., Warrington, PA, USA) according to the manual ...
-
bioRxiv - Neuroscience 2020Quote: ... The homogenized mixture was then poured into a solution containing 1% polyvinyl alcohol (25 kDa, 88% hydrolys, Polysciences, Warrington, PA) in water under continuous stirring ...
-
bioRxiv - Cell Biology 2020Quote: HEK293T stable cell lines for HSPB8-V5 were transiently transfected with different wild type or mutant BAG3-GFP constructs using PEI (23966-1, PolySciences Europe ...
-
bioRxiv - Molecular Biology 2021Quote: Approximately 50 to 100 million J-Lat 11.1 cells per condition were collected and crosslinked with 1% formaldehyde (Polysciences inc.) in 40 ml PBS ...
-
bioRxiv - Cell Biology 2022Quote: ... Beads were incubated for 2h at RT and then washed in PBS and further incubated for 30 minutes in 1 ml 50 mM ethanolamine (Polysciences). The beads were then washed 3 times in PBS and left in PBS on a cold room rotator.
-
Inhibition of major histocompatibility complex-I antigen presentation by sarbecovirus ORF7a proteinsbioRxiv - Microbiology 2022Quote: ... 5 μg of an HIV-1 Gag-Pol expression plasmid (pCRV1/GagPol) and 1 μg of VSV-G expression plasmid in 293T cells in 10-cm dishes using polyethylenimine (PolySciences). Virus-containing supernatant was collected and filtered (0.2μm ...
-
bioRxiv - Genetics 2022Quote: Circulating blood monocytes were labeled in vivo by retroorbital intravenous injection of 1 μm Flouresbrite YG microspheres (Polysciences Inc, PA) diluted 1:4 in sterile PBS in mice undergoing regression 3 days prior to harvest ...
-
bioRxiv - Immunology 2020Quote: ... the cells were transfected using 6 μg p509 and 6 μg p2670 plasmid DNAs (Neuhierl et al., 2002) mixed with 72 μl of a 1 mg/ml stock solution of polyethylenimine (#24765; Polysciences) in water (pH 7.0 ...
-
bioRxiv - Microbiology 2020Quote: ... The cells were incubated at 37°C for 72 hours after which cells were fixed with 1 ml of 10% formaldehyde (Polysciences) was added for 24 hours to ensure inactivation of virus ...
-
bioRxiv - Molecular Biology 2020Quote: ... Yeast strains were grown in rich medium (YPD) to mid-log phase (∼1.5×107/ml) and cross-linked with methanol-free formaldehyde (1% final concentration, Polysciences Inc) for 30 min and quenched with 0.25M final concentration of glycine (from 2.5M stock ...