Labshake search
Citations for Beckman :
801 - 850 of 1117 citations for Sulfur Free Cobalt Metallo Organic Standard Co @ 5000 µg g in Hydrocarbon Oil since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Bioengineering 2022Quote: ... the conditioned media was subjected to an additional centrifugation step of 118,000 × g for 2 h in a Type 70 Ti ultracentrifuge rotor (Beckman Coulter). The resulting EV pellet was resuspended in 1X PBS and placed into a Nanosep 300 kDa MWCO spin column (Pall ...
-
bioRxiv - Biochemistry 2022Quote: ... Lysates were cleared by centrifugation at 50,000 × g for 40 min in a Type 45 Ti fixed-angle rotor (Beckman Coulter). Pre-equilibrated Pierce High Capacity Streptavidin agarose resin (Thermo Fisher Scientific ...
-
bioRxiv - Biochemistry 2022Quote: ... Lysates were cleared by centrifugation at 50,000 × g for 40 min in a Type 45 Ti fixed-angle rotor (Beckman Coulter). Preequilibrated Ni2+-nitrilotriacetic acid (NTA ...
-
bioRxiv - Cell Biology 2022Quote: ... OptiPrep step-gradient and centrifuged for 60 min at 19,210 × g at 4 °C in a TLS-55 rotor (Beckman Coulter). The ROS band was collected with a 18G needle ...
-
bioRxiv - Cell Biology 2022Quote: ... Cells were centrifuged at 1500 g for 5 min in an F2402 rotor in a GS15R table-top centrifuge (Beckman) and resuspend with water to wash the cells ...
-
bioRxiv - Plant Biology 2022Quote: ... in a 12.5 mL ultracentrifuge tube and centrifuged for 1 h at 4°C at 200,000 × g in a swinging bucket rotor (Sorval SW-41 Ti; Beckman Coulter), with moderate acceleration and deceleration ...
-
bioRxiv - Microbiology 2022Quote: ... The sample-containing tube was spun at 347,000 × g and 20°C for 3 hours using Type 70 Ti rotor (Beckman Coulter). 1-mL fractions were collected from the top of the tube ...
-
bioRxiv - Microbiology 2022Quote: ... 20 mL of the filtrate was then ultracentrifuged at 150,000 × g at 4°C for 3 h (Beckman Coulter, USA) through a 20% (w/v ...
-
bioRxiv - Neuroscience 2023Quote: ... followed by ultracentrifugation at 100,000 x g for 60 minutes at 4°C (SW 41 Ti Rotor, Beckman Coulter Inc). For size-exclusion chromatography (SEC ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was then transferred to polycarbonate tubes and centrifuged at 100,000 × g and 4°C for 1 h in a XL-90 ultracentrifuge (Beckman Coulter) ...
-
bioRxiv - Cell Biology 2022Quote: ... This spin was repeated and the resulting supernatant was then centrifuged for 1 h at 75,000 g at 4°C (TLA-100.3 rotor or Type60 Ti rotor; Beckman Coulter, USA). The supernatant was aspirated and the membrane pellet gently resuspended in microsome buffer (10 mM HEPES/KOH pH 7.5. ...
-
bioRxiv - Biochemistry 2023Quote: ... made in TEMB buffer) and ultracentrifuged at 105,000 x g for 35 min (SW 32 Ti Swinging-bucket, Beckman Coulter). Gradients were fractionated ...
-
bioRxiv - Neuroscience 2023Quote: ... Fraction LP2 was obtained after centrifugation of fraction LS1 for 2 h at 165,000 g in a SW40 Ti rotor (Beckman, US). Corresponding supernatant was collected as Fraction LS2 ...
-
bioRxiv - Neuroscience 2023Quote: ... and centrifuged at 100,000 × g for 1 h at 4 °C using a TLA-55 rotor in an Optima TLX Ultracentrifuge (Beckman Coulter). The first supernatant ...
-
bioRxiv - Cell Biology 2024Quote: ... The samples were then centrifuged for 1 h at 100,000 g and 4°C in a TLS 55 rotor (Beckman-Coulter) with the appropriate adapters (#358614) ...
-
bioRxiv - Plant Biology 2024Quote: ... and centrifuged at 10,000 x g for 30 min at 4°C using a TLA100.3 fixed angle rotor and an Optima TLX Ultracentrifuge (Beckman Coulter).
-
bioRxiv - Biophysics 2024Quote: ... polarity-marked microtubules were pelleted at 20,000 g for 7 min at 37 °C in the TLA100 rotor (Beckman Coulter) and resuspended in BRB80 buffer with 40 mM taxol.
-
bioRxiv - Microbiology 2024Quote: ... sucrose gradients prepared with buffer C and centrifuged for 16 h at 71,935 g at 4 °C in a SW28 rotor (Beckman Coulter). Gradients were fractionated on a Biocomp Piston Gradient Fractionator (BioComp Instruments ...
-
bioRxiv - Neuroscience 2024Quote: ... The discontinuous sucrose gradient was centrifuged at 242,000 g for 47 min at 4 °C in a vertical rotor (VTi50 rotor, Beckman Coulter). The bulk GC fraction (GCF ...
-
bioRxiv - Neuroscience 2024Quote: ... were pooled and after ultracentrifugation at 110,000 × g for 70 min (Optima TLX ultracentrifuge with TLA 100.4 rotor, Beckman Coulter, Inc.), the pellets were resuspended in DPBS and stored at –80°C until further use.
-
bioRxiv - Microbiology 2024Quote: ... The remaining cells were pelleted using a 4,300 × g spin for 10 min in an Allegra X-14R centrifuge (Beckman Coulter) equipped with a swinging bucket SX4750 rotor ...
-
bioRxiv - Microbiology 2024Quote: ... Samples were added to the top of a 60%-30%-10% sucrose/PBS gradient and centrifuged at 16,000 x g for 4.5 h at 4°C with an SW32 Ti rotor (Beckman, Brea, CA). Virus bands at the 60%-30% sucrose interface were collected via tube side puncture ...
-
bioRxiv - Microbiology 2024Quote: ... tepidum culture was centrifuged at 10,000 x g for 10 min at 4°C in a JA-14 rotor (Beckman Coulter), and the supernatant was centrifuged again at 12,000 x g to remove cells and large debris ...
-
bioRxiv - Microbiology 2024Quote: ... The pellets from different centrifuge tubes were pooled and resuspended in 1 mL of 1X PBS and pelleted again by ultracentrifugation at 165,700 x g for 2 h at 4°C in a TLA-55 rotor (Beckman Coulter). The pellet was resuspended in 500 µL of 1X PBS and stored at -20°C until use ...
-
bioRxiv - Microbiology 2024Quote: ... and fractionated by centrifugation at 32 000 rpm (130 000 × g) for 17 h using an SW-41 rotor (Beckman). The gradient was divided into 20 fractions and proteins from each fraction were resolved on SDS-PAGE and detected by western blotting.
-
bioRxiv - Microbiology 2024Quote: ... 1 mM MgCl2) and fractionated by centrifugation at 130 000 × g for 17 h using an SW-41 rotor (Beckman). The gradient was divided into 20 fractions and proteins from each fraction were resolved on SDS-PAGE gels and detected by western blotting.
-
bioRxiv - Immunology 2024Quote: ... and EVs were isolated by ultracentrifugation (UC) at 100,000 x g for 2 h using a SW40 Ti rotor (Beckman Coulter) at 4°C ...
-
bioRxiv - Molecular Biology 2024Quote: ... and EVs were pelleted by ultracentrifugation for 60 minutes at 100,000 x g at 4 ° C in an SW40.Ti rotor (Beckman Coulter). After centrifugation ...
-
bioRxiv - Biochemistry 2024Quote: ... Lysates were clarified by ultracentrifugation at 4℃ at 184,000 x (g) in a 70Ti rotor for 50 minutes (Beckman Coulter). After affinity chromatography with StrepTactin SuperFlow resin (IBA) ...
-
bioRxiv - Biochemistry 2024Quote: ... then both the tubulin and dialyzed TOG-GFP were separately precleared by ultracentrifugation at 247,000 x g in a TLA100 rotor (Beckman Coulter) for 10 minutes at 2°C ...
-
bioRxiv - Biochemistry 2024Quote: ... were added to the desired concentration before clarification by ultracentrifugation at 247,000 x (g) for 10 minutes at 2°C in a TLA100 (Beckman Coulter). Glucose oxidase (GmbH ...
-
bioRxiv - Biochemistry 2024Quote: ... A crude ribosome pellet was obtained by centrifugation for 2h at 200,000 × g at 4 °C (70Ti rotor, Beckman Coulter) and solubilized in HMA6/30 for 16h at 4°C ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... EVs were purified from concentrated HES by ultracentrifugation at 100,000 x g for 90 mins at 4 °C in polyallomer tubes (Beckman Coulter) in a SW40 rotor (Beckman Coulter) ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... and pelleted each time by ultracentrifugation at 100,000 x g for 70 mins at 4 °C in polyallomer tubes (Beckman Coulter) in a SW40 rotor (Beckman Coulter) ...
-
bioRxiv - Biochemistry 2024Quote: ... Lysates were clarified by ultracentrifugation for 35 minutes at 4℃ at 70,000 x (g) in a 45Ti rotor (Beckman Coulter). Constructs containing N-terminal TOG domains (TOG1 ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... containing cell nucleus and other heavy organelles was discarded and supernatant was centrifuged for 30 min at 48,000 × g at 4 °C (Beckman Avanti J-251 Ultra-centrifuge; Beckman Coulter). The supernatant was discarded ...
-
bioRxiv - Microbiology 2024Quote: ... Ribosomes were isolated by sucrose cushion ultracentrifuged at 100,000 rpm (543,000 × g) for 1 h at 4°C with a TLA110 rotor and an Optima MAX-TL ultracentrifuge (Beckman Coulter). Subsequently ...
-
bioRxiv - Neuroscience 2024Quote: ... and the supernatant was ultracentrifuged at 100,000 g for 2 hours at 4°C with a 100 Ti rotor (Beckman Coulter) in a Beckman XL-90 ultracentrifuge ...
-
bioRxiv - Biochemistry 2024Quote: ... Equivalent amounts of cell lysates prepared as described above were loaded onto the sucrose gradients and spun at 35,000 g for 3 hours at 4°C in a SW41 rotor (Beckman Coulter). After centrifugation the polysomes were fractionated and absorbance was monitored at 254 nm for RNA and 680 nm for GFP using the TriaxTM Flowcell (BioComp Instruments) ...
-
bioRxiv - Immunology 2024Quote: ... and centrifuged at 100,000 x g at 4°C for 90 min using the Optima™ XPN-80 Ultracentrifuge from Beckman Coulter ...
-
bioRxiv - Biochemistry 2024Quote: ... Reaction mixtures were incubated for 20 minutes at 25 °C then centrifuged at 155,000 x g (TLA-100; Beckman Coulter) for 25 minutes at 25 °C ...
-
bioRxiv - Biophysics 2024Quote: ... the sample was separated by sucrose gradient ultracentrifugation with the gradients of 10 to 30 % sucrose and 0 to 0.2 % glutaraldehyde at 97,311 g at 4°C for 18hrs using an Optima™ XL-100K ultracentrifuge (Beckman Coulter). The fractions containing the complex were pooled and the sucrose was removed by using Amicon Ultra Centrifugal Filter ...
-
bioRxiv - Cancer Biology 2024Quote: ... Samples were subjected to ultracentrifugation of 260,000 x g for 16 hours at 4°C using the Optima XPN-80 and SW40Ti rotor (Beckman Coulter). Twelve 1-mL fractions were collected from the top and subjected to immunoblotting.
-
bioRxiv - Cell Biology 2024Quote: ... The reaction mixture was incubated at 30 °C for 30 min and centrifuged at 100,000 x g in an Airfuge (Beckman-Coulter) for 10 min ...
-
bioRxiv - Molecular Biology 2022Quote: ... Samples were tagged using barcodes NB01 to NB05 of the Native Barcoding Expansion 1-12 PCR-free kit (EXP-NBD104, ONT) and purified using Agencourt AMPure XP beads (Beckman Coulter). The barcoded samples were quantified using a Qubit fluorometer and pooled equimolarly to reach 700 ng in 65 μL ...
-
bioRxiv - Microbiology 2023Quote: ... The sample was then diluted with nuclease-free water and cleaned twice with 1.5× vol of Agencourt RNAClean XP beads (Beckman Coulter, A63987). Immediately following this step ...
-
bioRxiv - Cancer Biology 2023Quote: ... in phenol red free media 24 h prior to addition of drugs through an automated robotic liquid handler (BioMek, Beckman Coulter). After 72h ATP-luciferase assay reagent was added (CellTiter-Glo ...
-
bioRxiv - Genomics 2024Quote: ... Sequencing libraries were generated using a PCR-free approach (33) and then cleaned up using Agencourt AMPure XP SPRI beads (Beckman Coulter). The resulting libraries were sequenced on the Illumina NovaSeq platform at the Wellcome Sanger Institute ...
-
bioRxiv - Cell Biology 2020Quote: ... Fractions were diluted with 2.5 ml sterile PBS and centrifuged for 30 min at 100,000 × g (43,000 rpm) in a TLA 110 rotor (Beckman, Optima TL100 centrifuge). These concentrated fractions were resuspended in 30 μl sterile PBS prior to further assessment by electron microscopy or RNA preparation for sequencing.
-
bioRxiv - Cell Biology 2020Quote: ... Samples were pelleted at 280’000 x g for 10 min at 25 °C in an Optima XP centrifuge with a TLA-100 rotor (Beckman-Coulter). Supernatant and pellet fractions were separated on a 10 % SDS-PAGE gel and proteins were visualized by Coomassie Blue staining ...