Labshake search
Citations for Microchem :
1 - 32 of 32 citations for Fipronil Sulfone 3 Cyano Pyrazole 3 4 5 13C4 99%; 3 Cyano 5 15N2 98% 100 Ug Ml In Methanol since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Bioengineering 2023Quote: Molds for layer #3 and layer #5 (Figure S1d) are fabricated using SU-8 2075 (MicroChem, Newton, MA, USA) spin-coated at 2150rpm for 30s to create ∼100μm tall patterns (Figure S2a ...
-
bioRxiv - Neuroscience 2021Quote: ... (3) Spin-coating SU-8 precursor (SU-8 2000.5, MicroChem) at 3000 rpm ...
-
bioRxiv - Bioengineering 2020Quote: ... Negative master molds were fabricated on 3-in diameter silicon wafers (University Wafer ID: 447) using UV crosslinked Nano SU-8-100 photoresist (Microchem) patterned with photomasks printed on high-resolution transparent plastic film (CAD/Art Inc.) ...
-
bioRxiv - Bioengineering 2023Quote: ... SU- 8 5 and SU-8 50 (MicroChem) were subsequently spin-coated on the wafer at different heights (5 µm for microchannels and 100 µm for microwells ...
-
bioRxiv - Bioengineering 2020Quote: ... and (5) developing away uncured photoresist using SU-8 developer (Microchem Corp, Newton, MA) according to standard manufacturer instructions ...
-
bioRxiv - Cell Biology 2023Quote: ... Silicon wafers were coated with a first 5-μm layer of resin (SU8-3005; MicroChem; CTS) exposed to UV light at 23 mJ/cm2 (UV KUB2 ...
-
bioRxiv - Biophysics 2021Quote: ... followed by Pt/Ti (20 nm/5 nm) deposition with e-beam (Angstrom Engineering) and lift off using remover PG (MicroChem). To remove photoresist residues and improve the adhesion of electrodes ...
-
bioRxiv - Microbiology 2020Quote: ... and laser mask writer (Heidelberg Instruments) followed by Au/Cr (45 nm/5 nm) deposition and lift off using remover PG (MicroChem). After that the graphene patterning was done with lithography using same bilayer resist and oxygen plasma etching ...
-
bioRxiv - Neuroscience 2021Quote: ... (4) Spin-coating LOR3A photoresist (MicroChem) at 4000 rpm ...
-
bioRxiv - Cancer Biology 2024Quote: ... SU-8 100 photoresist (Microchem) was spun on a 4 inch silicon wafer (University Wafers ...
-
bioRxiv - Plant Biology 2019Quote: ... SU-8 100 (MicroChem, Westborough, USA) negative photoresist was stacked on a silicon wafer using a spin coater ...
-
bioRxiv - Bioengineering 2022Quote: ... Two SU-8 100 layers (MicroChem Corp) were coated on a microscope slide to achieve a thickness of 400 µm in height ...
-
bioRxiv - Bioengineering 2020Quote: ... a 4-μm-thick layer of SU-8 2005 (MicroChem) was spin coated ...
-
bioRxiv - Bioengineering 2022Quote: ... SU-8 based (SU-8 50 & SU-8 100, MicroChem, USA) wafer masters were fabricated according to the manufacturer’s protocols (media module ...
-
bioRxiv - Biophysics 2023Quote: A Piranha cleaned 4” Silicon wafer was spin coated with SU-2035 (Microchem) negative photoresist at 3000 rpm for 35 seconds to obtain a thickness of 75µm ...
-
bioRxiv - Bioengineering 2022Quote: ... a 100 μm thick layer of SU-8 2100 negative photoresist (Microchem) was spun-coated (WS-650MZ-23NPP/LITE ...
-
bioRxiv - Bioengineering 2023Quote: ... Mold for layer #4 is fabricated using SU-8 2025 (MicroChem, Newton, MA, USA) spin-coated at 4000rpm for 30s to create ∼20μm tall channels (Figure S2b) ...
-
bioRxiv - Bioengineering 2022Quote: ... The master molds for the PDMS layers were made using SU-8 100 (Microchem) which were spin-coated onto wafers ...
-
bioRxiv - Neuroscience 2020Quote: ... and 2 µm S1818 (Microchem, 5000 rpm, baking at 100°C for 1 min). Patterns were developed for 40 – 50 s in MF319 (Microchem) ...
-
bioRxiv - Cell Biology 2019Quote: ... Control molds were fabricated on 4” silicon wafers by spin coating SU-8 2025/3025 (MicroChem) at 500 rpm for 5 sec followed by 3000 rpm for 70 sec yielding a substrate height of around 15-18 μm ...
-
bioRxiv - Genomics 2021Quote: ... The SU-8 lithography is performed on a 4 inch silicon wafer using SU 8-2050 (Microchem) negative photoresist using UV aligner (EVG-620) ...
-
bioRxiv - Bioengineering 2023Quote: ... Negative master molds were made with Nano SU-8-100 photoresist (Microchem, Round Rock, TX, USA) on 3 silicon wafers (University Wafer Inc. ...
-
bioRxiv - Genomics 2019Quote: ... and then microfluidic channel features were patterned with a 100 µm layer of SU-8 3050 (Microchem). Each chip was then capped with cured PDMS with holes cored for all inlet and outlet ports ...
-
bioRxiv - Systems Biology 2019Quote: ... The master was subjected to post-exposure bake at 95°C for 4 min and developed in fresh SU-8 developer (Microchem) for 6 min ...
-
bioRxiv - Bioengineering 2020Quote: ... post-baked (65 °C and 95 °C for 1 min and 4 min, respectively) and developed in SU-8 developer (MicroChem). The SU-8 was hard-baked at 180 °C for 1 hour after development ...
-
bioRxiv - Synthetic Biology 2019Quote: Master moulds of 13μm height were produced on a 4 inch silicone wafer (University Wafer) using SU-8 3010 (Microchem corp.) according to the manufacturer’s data sheet and developed in PGMEA ...
-
bioRxiv - Microbiology 2023Quote: ... Molds were made on 100 mm silicon wafers (University Wafer) and spin coated with SU-8 3050 photoresist (MicroChem). Polydimethylsiloxane (PDMS ...
-
bioRxiv - Synthetic Biology 2020Quote: ... using reactive ion etching to define 3.1 µm deep chambers arrayed along a 100 µm wide by 22 µm deep channel defined by SU-8 photoresist (MicroChem). After treating with a silane release layer ...
-
bioRxiv - Genomics 2021Quote: ... Sharon Thermal Evaporator was used for the deposition of 100-nm-thick Ni followed by a standard lift-off procedure in remover PG (MicroChem) for 2 hours ...
-
bioRxiv - Bioengineering 2020Quote: Microfluidic devices for making 50 μm and 100 μm diameter drops were fabricated by patterning SU-8 photoresist (Microchem SU-8 3050) on silicon wafers (University Wafer ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... The chip mould with a uniform height of 23.5μm was obtained by spin-coating a silicon wafer (4 inches; Siltronix, France) with a negative photoresist (SU-8 2035, MicroChem Corp., Newton, MA, USA) according to manufacturer’s instructions ...
-
bioRxiv - Neuroscience 2022Quote: ... cleaned wafers were spin-coated with 1 ml/inch SU8-50 (MicroChem, Newton Massachusetts, USA) to obtain a 30-micron height (500 RPM (100 RPM/s acceleration for 15 seconds) ...