Labshake search

1 - 10 of 10 citations for Anti Syndecan 4 Antibody since 2019

• Tracking neural activity from the same cells during the entire adult life of mice

  Siyuan Zhao, et al., bioRxiv - Neuroscience 2021

  Quote: ... (4) Spin-coating LOR3A photoresist (MicroChem) at 4000 rpm ...
• Sputtered porous Pt for wafer-scale manufacture of low-impedance flexible microelectrodes

  Bo Fan, et al., bioRxiv - Bioengineering 2020

  Quote: ... a 4-μm-thick layer of SU-8 2005 (MicroChem) was spin coated ...
• Extracellular matrix imparts resilience to cancer spheroids

  Tavishi Dutt, et al., bioRxiv - Biophysics 2023

  Quote: A Piranha cleaned 4” Silicon wafer was spin coated with SU-2035 (Microchem) negative photoresist at 3000 rpm for 35 seconds to obtain a thickness of 75µm ...
• CeLab, a Microfluidic Platform for the Study of Life History Traits, reveals Metformin and SGK-1 regulation of Longevity and Reproductive Span

  Salman Sohrabi, Vanessa Cota, Coleen T. Murphy, bioRxiv - Bioengineering 2023

  Quote: ... Mold for layer #4 is fabricated using SU-8 2025 (MicroChem, Newton, MA, USA) spin-coated at 4000rpm for 30s to create ∼20μm tall channels (Figure S2b) ...
• Cell cycle oscillators underlying orderly proteolysis of E2F8

  Danit Wasserman, et al., bioRxiv - Cell Biology 2019

  Quote: ... Control molds were fabricated on 4” silicon wafers by spin coating SU-8 2025/3025 (MicroChem) at 500 rpm for 5 sec followed by 3000 rpm for 70 sec yielding a substrate height of around 15-18 μm ...
• HyDrop: droplet-based scATAC-seq and scRNA-seq using dissolvable hydrogel beads

  Florian V. De Rop, et al., bioRxiv - Genomics 2021

  Quote: ... The SU-8 lithography is performed on a 4 inch silicon wafer using SU 8-2050 (Microchem) negative photoresist using UV aligner (EVG-620) ...
• Rapid microbial interaction network inference in microfluidic droplets

  Ryan H. Hsu, et al., bioRxiv - Systems Biology 2019

  Quote: ... The master was subjected to post-exposure bake at 95°C for 4 min and developed in fresh SU-8 developer (Microchem) for 6 min ...
• Sputtered porous Pt for wafer-scale manufacture of low-impedance flexible microelectrodes

  Bo Fan, et al., bioRxiv - Bioengineering 2020

  Quote: ... post-baked (65 °C and 95 °C for 1 min and 4 min, respectively) and developed in SU-8 developer (MicroChem). The SU-8 was hard-baked at 180 °C for 1 hour after development ...
• Microfluidic trapping of vesicles reveals membrane-tension dependent FtsZ cytoskeletal re-organisation

  Kristina A. Ganzinger, et al., bioRxiv - Synthetic Biology 2019

  Quote: Master moulds of 13μm height were produced on a 4 inch silicone wafer (University Wafer) using SU-8 3010 (Microchem corp.) according to the manufacturer’s data sheet and developed in PGMEA ...
• A microfluidic device for controlled exposure of transgenic Ciona intestinalis larvae to chemical stimuli demonstrates they can respond to carbon dioxide

  Guillaume Poncelet, et al., bioRxiv - Evolutionary Biology 2022

  Quote: ... The chip mould with a uniform height of 23.5μm was obtained by spin-coating a silicon wafer (4 inches; Siltronix, France) with a negative photoresist (SU-8 2035, MicroChem Corp., Newton, MA, USA) according to manufacturer’s instructions ...