Labshake search
Citations for Microchem :
1 - 10 of 10 citations for 7 CHLORO 3 METHYL 1H INDOLE since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biophysics 2022Quote: ... the quartz chip was firstly spin-coated with the poly(methyl methacrylate) (PMMA) (MicroChem) with around 300 nm height ...
-
bioRxiv - Bioengineering 2022Quote: ... After baking and developing with SU-8 developer (propylene glycol methyl ether acetate; MicroChem Corp.), the 10-μm tall positive master of the drop-maker and the 25-μm tall positive master of the sorter are formed on the silicon wafers ...
-
bioRxiv - Bioengineering 2022Quote: ... After baking and development with SU-8 developer (propylene glycol methyl ether acetate; MicroChem Corp.), the 15 μm and 25 μm tall positive masters of the devices were formed on the silicon wafers ...
-
bioRxiv - Bioengineering 2022Quote: ... After baking and development with SU-8 developer (propylene glycol methyl ether acetate; MicroChem Corp.), a 10-μm tall positive master of the device was formed on the silicon wafer ...
-
bioRxiv - Bioengineering 2022Quote: ... A 7 μm thick SU-8 2007 (MicroChem Corp.) was spin coated on the PET film at 3,000 rpm for 40 s ...
-
bioRxiv - Bioengineering 2020Quote: ... the device was encapsulated by a 7 μm thick SU-8 photoepoxy (SU-8 2007, Microchem) via photolithography.
-
bioRxiv - Genomics 2023Quote: ... The wafer was baked at 95 °C for 7 min and then rinsed with SU-8 developer (MicroChem, Y0201004000L1PE). The wafer was finally washed with isopropanol ...
-
bioRxiv - Neuroscience 2021Quote: ... (3) Spin-coating SU-8 precursor (SU-8 2000.5, MicroChem) at 3000 rpm ...
-
bioRxiv - Bioengineering 2023Quote: Molds for layer #3 and layer #5 (Figure S1d) are fabricated using SU-8 2075 (MicroChem, Newton, MA, USA) spin-coated at 2150rpm for 30s to create ∼100μm tall patterns (Figure S2a ...
-
bioRxiv - Bioengineering 2020Quote: ... Negative master molds were fabricated on 3-in diameter silicon wafers (University Wafer ID: 447) using UV crosslinked Nano SU-8-100 photoresist (Microchem) patterned with photomasks printed on high-resolution transparent plastic film (CAD/Art Inc.) ...