Labshake search
Citations for Microchem :
1 - 24 of 24 citations for 7 CHLORO 10 11 DIHYDRO 5H DIBENZ B F ACEPIN 2 OL since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2021Quote: ... (11) Spin-coating SU-8 precursor (SU-8 2025, MicroChem) at 3000 rpm ...
-
bioRxiv - Bioengineering 2022Quote: ... A 7 μm thick SU-8 2007 (MicroChem Corp.) was spin coated on the PET film at 3,000 rpm for 40 s ...
-
bioRxiv - Bioengineering 2020Quote: ... the device was encapsulated by a 7 μm thick SU-8 photoepoxy (SU-8 2007, Microchem) via photolithography.
-
bioRxiv - Genomics 2023Quote: ... The wafer was baked at 95 °C for 7 min and then rinsed with SU-8 developer (MicroChem, Y0201004000L1PE). The wafer was finally washed with isopropanol ...
-
bioRxiv - Genetics 2021Quote: ... we spin-coated SU8-2 (MicroChem) on the wafer with the target height of 1.2 µm ...
-
bioRxiv - Bioengineering 2023Quote: ... (2) LOR 3A and S1805 (Microchem) were spin-coated at 4,000 rpm for 45 s and baked at 180 °C for 4 min and at 115 °C for 1 min ...
-
bioRxiv - Bioengineering 2023Quote: ... (2) LOR 3A and S1805 (Microchem) were spin-coated at 4,000 rpm for 45 s and baked at 180 °C for 4 min and at 115 °C for 1 min ...
-
bioRxiv - Bioengineering 2021Quote: ... a 2-μm-thick SU8 encapsulation layer (SU8-2002, Microchem) was spin-coated onto the sample ...
-
bioRxiv - Bioengineering 2022Quote: ... SU8-10 and SU8-2010 were purchased from MicroChem. Biotin-coated polystyrene beads (Cat#TPX-150-5 ...
-
bioRxiv - Bioengineering 2020Quote: ... The sample was developed for ~10 min in SU-8 developer (MicroChem) and then sprayed down with IPA and dried ...
-
bioRxiv - Neuroscience 2020Quote: ... and 2 µm S1818 (Microchem, 5000 rpm, baking at 100°C for 1 min). Patterns were developed for 40 – 50 s in MF319 (Microchem) ...
-
bioRxiv - Biochemistry 2021Quote: ... Undeveloped photoresist is washed off with SU-8 developer (1-methoxy-2-propanol acetate, MicroChem).
-
bioRxiv - Bioengineering 2023Quote: ... and O2 plasma treated (Harrick Plasma) for 2 min prior to coating with SU-8 photoresist (MicroChem, Kayaku) using a spin-coater ...
-
bioRxiv - Bioengineering 2023Quote: ... with 500×500 µm2 surface area is detached from the Si host substrate using a polydimethylsiloxane (PDMS, Sylgard 184, DOW Chemical) stamp covered with a 2 µm-thin polymethyl methacrylate (PMMA, MicroChem) layer (Fig.S5A ...
-
bioRxiv - Systems Biology 2020Quote: ... the silicon wafer was baked for 10 min at 200°C and spin coated at 4000 rpm using SU-8 2000.5 (MicroChem) to generate 0.5 μm height ...
-
bioRxiv - Biophysics 2020Quote: A 4-inch silicon wafer was structured with a first SU8-3010 layer of 10 μm and a second SU8-3050 layer of 50 μm (both MicroChem), according to manufacturer instructions using a μPG101 exposure system (Heidelberg Instruments ...
-
bioRxiv - Bioengineering 2019Quote: ... at a ratio of 10:1 base to curing agent was cast against a mold composed of SU-8 2150 (MicroChem) patterns formed on a silicon wafer ...
-
bioRxiv - Bioengineering 2021Quote: ... by UV (365nm with 11.1mW/cm2) exposure (UV-KUB 2, KLOE, France) of a 75 μm thick layer of SU-8 2075 photoresist (MicroChem Corporation, USA) for 20s ...
-
bioRxiv - Bioengineering 2023Quote: ... PDMS mixture (10:1 elastomer base to curing agent, w/w) was degassed and poured onto SU-8 (MicroChem, MA, USA) patterned wafer and cured at 80°C for 1 h ...
-
bioRxiv - Microbiology 2022Quote: ... at a base to curing agent ratio of 10:1 was cast against a mold composed of SU-8 2150 (MicroChem, Cat# SU-8 2150) patterns formed on a silicon wafer ...
-
bioRxiv - Microbiology 2022Quote: ... at a base to curing agent ratio of 10:1 was cast against a mold composed of SU-8 2150 (MicroChem, Cat# SU-8 2150) patterns formed on a silicon wafer ...
-
bioRxiv - Microbiology 2023Quote: ... at a base-to-curing agent ratio of 10:1 was cast against a mold composed of SU-8 2150 (MicroChem, Cat# SU-8 2150) patterns formed on a silicon wafer ...
-
bioRxiv - Microbiology 2023Quote: ... at a base to curing agent ratio of 10:1 was cast against a mold composed of SU-8 2150 (MicroChem, Cat# SU-8 2150) patterns formed on a silicon wafer ...
-
bioRxiv - Neuroscience 2020Quote: ... the bottom Ag anode was structured via photolithography using a spin-coated bi-layer photoresist of 660 nm LOR7B (Microchem, 3000 rpm, baking at 180°C for 10 min) and 2 µm S1818 (Microchem ...